Skip to main content

Flooring Cost Calculator per m² (Estimate)

Estimate the cost of timber, engineered, laminate or parquetry flooring per m², including offcuts and installation.

For an 18 m² living room laid with the boards running diagonally, order 20.7 m² of flooring (18 × 1.15). Straight laying, with its 10% allowance, needs 19.8 m² (18 × 1.10) for the same room. The extra allowance for diagonal laying covers the angled cuts at the edges of each row, which produce more offcuts than the square cuts used in straight rows.

The floor area is only the starting point. The final cost of flooring rarely matches the price per square metre shown by a supplier. Offcut waste, installation labour and the materials needed to finish the floor, such as subfloor levelling compound, adhesive, underlay and transition strips, all add to the total. Many people leave these out of early budgets, and the total can end up well above the first estimate.

This calculator brings these variables together for four common flooring types: solid timber, engineered timber, laminate and timber parquetry (mosaic). Each has a different price range and installation requirement, so the same 18 m² room can cost very different amounts depending on the choice.

Local conditions matter too. Timber reacts to humidity and temperature, so a floor in a Queenslander in Brisbane behaves differently from one in a brick veneer house in an inland region with hot, dry summers. Older homes in Melbourne or Sydney may have timber or concrete subfloors that need checking before any boards go down. The formula is the same everywhere, so enter local prices and quotes rather than generic figures.

Treat the result as a budget tool rather than a quote. Ask at least three installers for itemised quotes, and check whether each one includes subfloor preparation. Enter the installation figure in the field provided, and the calculator adds it to the material cost including waste.

The result updates automatically.

Net area of the room, excluding furniture

Reference value for this type and quality. Adjust to match the quote you've received.

Leave blank to calculate materials only

Estimated total cost

$1,324

materials $924 + installation $400

Area with waste (10%)
22.0 m²
Material cost
$924
Installation cost
$400
Original area
20.0 m²

Turn this calculation into a quote for your client

We're building a tool for professionals. Be among the first to try it.

Share

How it works

1

Enter the floor area in square metres (m²).

2

Select the flooring type: solid timber, engineered timber, laminate or timber parquetry (mosaic).

3

Choose the quality grade. The reference price per m² fills in automatically.

Formula

C = A × (1 + D/100) × p + A × i
C — Estimated total cost (Australian dollars)
A — Floor area to be covered (m²)
D — Waste allowance (%): 10% for straight laying, 15% for diagonal laying
p — Material price (Australian dollars per m²)
i — Installation cost (Australian dollars per m²), optional

How the calculation works

How to estimate flooring cost in Australia

Budgeting for flooring looks simple: multiply the floor area by the price per square metre and you have a number. In practice, three costs are easy to overlook: offcut waste, installation labour and the ancillary materials needed to finish the floor. This calculator covers the first two directly. Ancillary materials, such as subfloor levelling compound, adhesive, underlay and transition strips, are not included, so add them separately when preparing the budget.

Waste is unavoidable. The boards at the end of each row have to be cut to fit against the wall, and the offcut is often too short to reuse. With straight laying, where the boards run parallel to the walls, the calculator applies a 10% allowance. Diagonal laying, often chosen for narrow rooms or plans with irregular walls because it makes a space look larger, raises the allowance to 15%. The angled cuts at the edges produce more offcuts. In a 25 m² room, the allowance is 2.5 m² for straight laying and 3.75 m² for diagonal laying, so diagonal laying adds 1.25 m² of extra material, which can add a significant amount to the cost of solid timber.

Types of flooring available in Australia

Four common flooring types are covered here, and their price and installation requirements differ considerably.

Solid timber: boards of full thickness, made from hardwoods such as Tasmanian oak, spotted gum or blackbutt, as well as imported species. Solid boards can be sanded and refinished several times over their life, which makes them the most durable option when properly maintained. They are nailed or glued to the subfloor, which calls for a specialist installer and a completely level, dry base. Price varies widely with species and finish. Exotic species and hand-finished boards cost considerably more than common local timbers.

Engineered timber: a thin layer of hardwood bonded to a core of plywood or HDF. The core makes the board more dimensionally stable than solid timber when humidity and temperature change, so it suits homes with strong seasonal swings. It can be installed floating over an underlay or glued down. The price depends on the thickness of the wear layer and the species. Entry-level lines sit close to premium laminate, while high-end lines approach solid timber. Engineered boards can usually be sanded only a limited number of times, depending on the wear layer.

Laminate flooring: not real timber, but a printed decorative layer on an HDF core that copies the look of timber, stone or tile. It is widely sold through large DIY retailers. Laminate cannot be sanded. Abrasion ratings such as AC4 or AC5 under EN 13329 indicate how well it resists wear, and service life depends on foot traffic and care, so check the manufacturer's warranty and care guidance.

Timber parquetry (mosaic): small solid timber slats glued together into square panels. It is common in early twentieth-century terraces and apartments in inner-city Sydney and Melbourne. Installation is more labour-intensive because each slat is fixed to the slab individually, which raises labour costs compared with other types. Material costs are comparable to mid-range solid timber and vary with species and slat quality.

Installation: what drives labour cost

Installation is a significant share of the total, especially for higher-quality floors. Three levels of complexity define the labour cost.

Basic installation (floating laminate): click-together boards laid over an underlay, without adhesive. This is the least expensive labour option because it needs no specialist equipment and no curing time.

Intermediate installation (floating or glued engineered timber): the floating version needs a level subfloor and a specific underlay. The glued version needs polyurethane adhesive and professional equipment, which raises labour cost significantly compared with floating installation.

Specialist installation (solid timber nailed or glued, and parquetry): needs an experienced installer, a flat base, moisture control and, for parquetry, sanding and final finishing. It is consistently the most expensive labour in this category.

Labour rates also depend on location. Installers in inner-city Sydney and Melbourne often quote higher than the national average because demand is strong, while regional areas tend to have lower rates. Ask for quotes from local installers to see the real difference for your postcode.

To get the total cost, enter the installation quote in the installation field. The calculator adds it to the material cost, including waste.

Subfloor preparation: the hidden cost

The most expensive mistake in a flooring job is laying over an unprepared subfloor. Unevenness in a concrete slab or timber subfloor causes visible dips, gaps and squeaks over time. Check the maximum unevenness allowed in the manufacturer's installation guide, and ask the installer whether levelling is included in the quote. Levelling with a self-levelling compound is often left out of early budgets, but it is a real cost that should be requested explicitly.

For glued timber flooring, test the residual moisture in the concrete slab with a moisture meter or the method the adhesive and flooring data sheets specify. The maximum residual moisture level stated in those data sheets is the limit for a reliable bond; if the slab is above it, the adhesive cannot be relied on. Older slabs without a damp-proof membrane are more likely to exceed that limit, particularly in renovations. Drying time depends on slab thickness and conditions, so allow for possible delay, or a barrier primer may be needed before the adhesive is applied.

Common mistakes to avoid

Buying without a waste allowance. Buying exactly the room area is the most frequent error. For a 20 m² room with a 10% allowance, buy at least 22 m². If you buy only 20 m² and cut badly at one end, you may run out before the last row is finished.

Not checking the production batch. Laminate and engineered boards from the same model but different production batches can show visible differences in colour and texture. Buy from a single batch and order a little more than the calculated quantity to keep spare boards for future repairs.

Installing without acclimatisation. Solid and engineered timber should be stored in the room where it will be laid for the period the manufacturer specifies. Timber expands and contracts with temperature and humidity, so boards laid straight from delivery can cup or gap within months. Laminate is more tolerant, but it should also be acclimatised, for the period stated in its installation guide.

When not to use this calculator

The calculator is not a replacement for a written quote from a licensed installer. It does not cover stair nosings, curved or custom work, or wet areas such as bathrooms, where timber is generally unsuitable. Use the result as a starting point for comparing quotes.

Standards and local rules

Flooring specifications commonly reference European standards: EN 13226 for solid timber, EN 13489 for engineered timber and EN 13329 for laminate. The National Construction Code, published by the Australian Building Codes Board, sets the general building requirements that apply to renovations and new homes. State and territory authorities may add their own requirements, so check with your local council before starting work, especially on heritage-listed homes.

Frequently asked questions

What affects the cost of timber flooring in Australia?

The type of flooring matters most. Laminate is generally the least expensive option and is widely sold through large DIY retailers. Engineered timber sits in the middle, with price depending on the thickness of the hardwood top layer and the species. Solid timber is usually the most expensive, and its price varies widely with species and finish. For a realistic budget, add a waste allowance of 10% for straight laying or 15% for diagonal laying to the material cost, then get installation quoted separately. On quality flooring, installation can cost as much as the material itself, so it should never be left out.

What is the difference between solid and engineered timber flooring?

Solid timber is made of full-thickness boards, which can be sanded and refinished several times over a long working life. Engineered timber has a thin layer of hardwood bonded to a plywood or HDF core. The core resists movement, so engineered boards cope better with the humidity and temperature changes common in many Australian homes. They can be floated over an underlay or glued down. Because the wear layer is thinner, engineered boards can usually be sanded only a limited number of times, so check the wear layer thickness before buying.

Should I lay flooring straight or diagonally?

Diagonal laying makes a room look wider and is often chosen for narrow rooms or spaces with irregular walls. Its drawback is waste: the calculator uses 15% for diagonal laying, compared with 10% for straight laying. In an 18 m² room, that is an extra 0.9 m² of material. Diagonal laying also takes longer to install and usually costs more in labour because it requires more cuts. Straight laying, with the boards parallel to the longest wall, is the simpler option and is often the more economical choice.

Can I install timber flooring in a bathroom or kitchen?

Timber flooring is not recommended in bathrooms. Constant exposure to water damages timber, even with a sealed finish, and moisture gets into the joints. In kitchens, engineered timber or laminate with an AC4 or AC5 abrasion rating (EN 13329) can be used, but the area around the sink and dishwasher needs extra care and spills should be wiped up promptly. For wet areas, vinyl or tiles are generally a more suitable choice. Check the manufacturer's care guidance before fitting any timber-look product in a kitchen.

What drives the installation cost of flooring in Australia?

Installation falls into three broad levels. Basic installation of floating laminate, which clicks together over an underlay, is the least expensive. Intermediate installation of floating or glued engineered timber costs more, because it requires a level subfloor and, for glued versions, polyurethane adhesive and professional equipment. Specialist installation of solid timber and parquetry is the most expensive, as it requires a flat base, moisture control and, for parquetry, sanding and final finishing. Labour rates also vary between capital cities and regional areas. Get at least three itemised quotes that state whether subfloor preparation is included, then enter the chosen figure in the calculator.

When should I hire a specialist to install flooring?

Floating laminate is within reach of an experienced home renovator, because manufacturers publish detailed installation guides. For solid or engineered timber that is glued down, a specialist installer is recommended, since subfloor preparation, adhesive selection and moisture control need experience. Parquetry and exotic species with unusual layouts usually call for a specialist. If the home is heritage-listed, or if the flooring is part of a building approval, check with the local council first, because the floor may need to match a specification set by an architect or heritage adviser.

View all Paint & Coatings calculators →

By RivoCalc · Reviewed under our editorial methodology · Updated 6 June 2026

This calculator produces an estimate for budgeting only. Actual costs vary with the product, species, supplier, installer, site conditions and location. Check the subfloor and moisture levels, follow the manufacturer's installation requirements, and get written quotes before committing to any work.