Full House Painting Cost Calculator
Estimate the total cost of a house paint job, split into labour and materials, with a regional adjustment for labour rates.
A 4 m by 3.5 m room with 2.4 m ceilings has about 36 m² of wall to paint and 14 m² of ceiling. Repeat that across the whole house and you have the two quantities that drive a paint job: how much paint and primer you need, and how many hours of labour it takes to apply them. This calculator works with both, so you can see which part of the total is driving the price.
Most people underestimate the job for two reasons. The first is that they measure the floor and forget that walls are often larger than the floor area of a room, because they run from floor to ceiling all the way round. The second is that they buy paint for the wall area alone and leave out primer, filler, masking tape and drop sheets. Labour is the line that varies most between painters and between regions, so it is worth comparing quotes closely.
The calculator keeps the two parts separate. Wall area and ceiling area are each multiplied by their own material and labour rates, because ceilings take longer per square metre. The labour total is then adjusted for the region, since local labour rates are what change most from one area to another. Enter 0 for ceilings if you are only painting walls.
Treat the result as an estimate, not a quote. A painter needs to see the surfaces before pricing the preparation, which is where many jobs go over budget. Use the figure to check whether a quote you receive is reasonable, to compare quotes that describe the work differently, and to plan the money before the first coat goes on.
Interior painting is the default scope. Exterior work, with its different surfaces, weather and access equipment, is a separate job and should be priced separately.
The result updates automatically.
Total of all the walls. Enter 0 if you're not painting walls.
The same as the floor area of the rooms. Enter 0 if you're not painting ceilings.
Reference values cover labour and materials per m² of wall and ceiling, before the regional labour adjustment. Replace them with the figures from your own written quotes.
Estimated total cost
90 painted
- Materials — walls
- $420
- Materials — ceilings
- $218
- Labour — walls
- $270
- Labour — ceilings
- $188
- Total area painted
- 90 m²
How it works
Formula
How the calculation works
How to estimate the cost of painting a house
Painting a house looks like a simple purchase of paint and a few days of labour, which is why the total so often surprises people. The cost has two separate parts, materials and labour, and each one moves for different reasons. This calculator keeps them apart, so you can see where the money goes and test a quote against a realistic breakdown. The result is an estimate built from the areas you enter, not a fixed price.
How the formula works
The calculator uses this formula:
C_total = (A_p × m_p + A_t × m_t) + (A_p × h_p + A_t × h_t) × r
In words, the materials part multiplies the wall area by the material cost per square metre of wall, then adds the ceiling area multiplied by the material cost per square metre of ceiling. The labour part does the same with the labour rates for walls and ceilings. The whole labour part is then multiplied by the regional multiplier r. The multiplier applies only to labour, because it reflects local labour rates rather than the price of paint.
Each term is a simple product, so the result is zero when both areas are zero and rises in a straight line as any input rises. Entering 0 for the ceiling area removes the ceiling terms and leaves a wall-only estimate. A regional multiplier of 1 uses the reference rate. A value above 1 raises labour for higher-cost areas, and a value below 1 lowers it. Negative areas or rates have no physical meaning and should be corrected before the result is used.
Labour: the largest and least predictable part
Labour is the part of an interior paint job with the widest range between quotes. It depends on the preparation the surfaces need (filling cracks, sanding, priming), the number of coats, how easy the rooms are to access and the height of the work. A room with high ceilings or a stairwell takes longer than a standard room of the same floor area.
Ceilings are slower per square metre than walls. The painter works with the arms raised, stops more often and has to protect the floor and fittings below, which is why the calculator keeps a separate labour rate for ceilings. Expect painters to charge more for ceiling work than for walls, and set the ceiling rate to match the figure you are quoted.
Labour rates often differ between capital cities and regional areas. The difference reflects local demand, travel time and how many experienced painters are available. Remote jobs may also carry travel or accommodation charges that a standard rate does not capture. Use the regional multiplier as a starting point, then check it against the local quotes you receive.
Materials: more than the tin of paint
Paint is only part of the material cost. A typical interior job also uses a primer or sealer on bare, patched or repaired surfaces, two coats of finish paint, and consumables such as masking tape, roller sleeves, trays, drop sheets, sandpaper and filler. Consumables are a small share of the total, but running out mid-job delays the work, so they belong in the estimate.
Paint is usually sold in three broad tiers: economy, mid-range and premium. Economy paints have the lowest price per litre but often need more coats to reach an even finish. Mid-range products suit most homes because they balance coverage, durability and cost. Premium products use specialised formulations and state higher coverage, and they cost more per square metre. Compare products by cost per square metre of coverage rather than by the price of the tin, because coverage, measured in m² per litre, decides how many litres the job needs. Check the coverage on the manufacturer's technical data sheet, since stated figures assume a particular surface and application method.
Choosing a painter
Get at least two or three written quotes. Prices vary, and the lowest quote is not always the one with the best preparation or the most experience. A useful quote states the number of coats, the product and quality tier, the area being charged and whether preparation is included or charged separately.
Check the business details before you agree. Ask a sole trader for an ABN and a written invoice that shows it, and ask a painting company for a current certificate of currency for its public liability insurance. The Australian Taxation Office (ATO) publishes the requirements for a valid tax invoice. Ask which licence and insurance the painter holds for the work, and check them with your state or territory's building regulator before work starts.
Ask how the painter prepares the surfaces. A good painter explains filling, sanding and priming without prompting. If preparation only comes up after you ask about it, it is worth asking more questions before you sign.
Preparation also decides how long the finish lasts. A well-prepared surface can carry a paint system for years, while poor preparation tends to show up as peeling or flaking early. The expected life of a paint system depends on the product, the surface and the climate, so rely on the manufacturer's technical data sheet for the recommended repainting interval rather than on a general figure.
DIY or professional?
Doing the job yourself removes the labour line from the budget but adds time. Preparation and two coats take many hours per room, and an inexperienced painter may need extra coats to hide the first attempt. For a single bedroom, a hallway or a small bathroom, DIY can make sense when time is available and the budget is tight. For a whole house, the hours add up faster than most people expect, and the finish from an experienced painter is usually more even, especially at edges, cornices, skirting boards and around window frames.
Scope: interior, exterior and special cases
This calculator is for interior painting. Exterior work uses different products, has to cope with weather and often needs scaffolding or elevated platforms, so its costs do not compare directly with interior rates. Keep exterior jobs in a separate estimate.
If the house has exposed brickwork that will stay unpainted, subtract those areas from the wall total. The same method works for a brick veneer house in Sydney, a terrace in Melbourne, a Queenslander in Brisbane, a house-and-land package in Perth or a unit in Adelaide: measure the walls and ceilings, then apply your own rates.
Older homes may contain lead-based paint. Before any sanding or scraping, have the surfaces checked and follow the lead guidance published by Safe Work Australia for work with lead, because this changes both the preparation and the cost.
Common mistakes
- Counting the floor area as the wall area. Walls usually cover a larger area than the floor, because they run from floor to ceiling around every room.
- Ignoring window and door openings. The result is a gross figure. Subtracting openings gives a more precise area, but check how each quote measures the job.
- Forgetting primer on bare plaster, plasterboard joins or patched areas.
- Comparing the price per tin rather than the cost per square metre of coverage.
- Starting work over damp stains, mould or flaking paint. Painting over active moisture usually hides the problem for a short time and makes it worse later.
- Forgetting to allow for protection and clean-up, such as moving furniture and removing fittings.
When not to use this calculator
Do not treat the calculator as a fixed-price contract. It is a planning tool, and the painter's written quote is the binding figure. Do not use it for commercial premises, which have different requirements, or for exterior work, which needs a separate estimate. If the walls show damp, mould, bubbling or widespread flaking, a building inspector, licensed builder or building designer should diagnose the cause before any painter is engaged.
Before you commit
Check each input against your own measurements and the quotes you receive. Confirm that the quotes include preparation, access and clean-up. Keep a contingency for surprises once old surfaces are stripped back, because hidden repairs are common in older houses and rarely visible at the start. Then compare the estimate with the quotes and decide which items to negotiate, which to change and which to accept.
Frequently asked questions
How do I estimate the cost of painting a house?
Start with the wall and ceiling areas, then price materials and labour separately. A 4 m by 3.5 m room with 2.4 m ceilings has about 36 m² of wall and 14 m² of ceiling. Enter the totals for the whole house, choose the quality tier and who will do the work, and the calculator gives an estimate. Then compare the result with your quotes and check that each one states the number of coats, the products and whether preparation is included.
Do ceilings cost more to paint than walls?
Usually yes. Painting a ceiling means working with your arms overhead for long periods, which is slower and more physically demanding, so painters tend to charge more per square metre than they do for walls. The calculator applies a separate labour rate for ceilings, which you can set to match the figure you are quoted. If you are not painting the ceilings, enter 0 in the ceiling area field.
What is the difference between a sole trader painter and a painting company?
A sole trader working alone often has the lowest labour rate, but check that they provide a written invoice and hold public liability insurance. A painting company with a team and a formal warranty usually costs more per square metre, and that difference reflects its insurance, supervision and warranty. For small jobs, a sole trader with good references is often the most practical choice. For large projects, a company tends to give more predictable timing and a clearer warranty, so ask for the terms in writing.
Is it cheaper to buy the paint myself and hire only the labour?
It can be, but the saving is not always what it looks like. Many painters buy paint at trade pricing and include it in their quote, so the materials charge may be close to what you would pay buying it yourself. The real advantage of buying your own paint is choosing an exact product, such as a specific finish, a low-VOC paint or a colour the painter does not normally stock. Ask whether the painter will use your paint and whether they will still warranty the finish if they do.
When does DIY painting make sense?
DIY makes sense for small jobs such as a single bedroom or a hallway, where time is available and the budget is tight. For a full house, the hours add up faster than most people expect, and the finish from an experienced painter is usually more even. Quality tends to suffer most at corners, skirting boards and around window frames, where technique makes the biggest difference. The calculator shows the material side either way, so you can compare the two options on the same basis.
When should I get a building professional before painting?
Painting is a finishing step, so the calculator assumes the surfaces are sound. If the walls show damp stains, mould, bubbling or widespread flaking paint, find and fix the cause first. Painting over active moisture usually hides the problem for a short time and makes it worse later. In these cases, a building inspector, a licensed builder or a building designer can diagnose the cause before a painter starts. Ask which licence and insurance the painter holds for the work before you hire.
Related calculators
Wall Paint Calculator: How Many Litres Do You Need?
Calculate how many litres of paint you need for a room's walls. Includes a 5% touch-up margin and an optional cost estimate.
Ceiling Paint Calculator (Litres and Coats)
Estimate the litres of ceiling paint you need from room size, paint coverage and number of coats. Results are instant and free.
Exterior Paint Calculator for Facades
Works out the litres of exterior paint and primer for a facade, using coverage for smooth, textured and porous surfaces, plus a 10% margin.
View all Paint & Coatings calculators →
By RivoCalc · Reviewed under our editorial methodology · Updated 12 May 2026
This calculator gives an indicative estimate, not a quote. Real costs vary with the condition of the surfaces, access, the products chosen, local labour rates and each painter's own pricing, so check the result against written quotes from licensed or insured tradespeople.
