Aluminum Window Cost Calculator (per m²)
Estimate the total cost of aluminum windows from the number of units, average size, glazing type and optional installation labour.
For ten windows that are 1.2 m wide and 1.5 m high (about 4 ft by 5 ft), the area to price is 18 m², and the estimate multiplies that area by the price per square metre, then adds installation for each window. Window count, average size, glazing type and frame type decide most of the result, so these are the inputs that deserve the most care.
Windows affect comfort, noise and energy use in a home, yet they are often underestimated in renovation budgets. Aluminum frames are popular for their strength, slim sightlines and low maintenance. Their main drawback is that aluminum conducts heat well, which makes the choice between a standard frame and a thermally broken frame as important as the glass. In a cold city such as Winnipeg, Edmonton or Ottawa, a standard frame can feel cold to the touch and collect condensation in winter, even when the glass itself performs well.
This calculator estimates the total cost of a set of identical windows, using the number of units, the average width and height, the window type you choose and whether installation is included. It covers three window types that are common in quotes, single glazing, double glazing and double glazing with a low-E coating, and two frame types, standard and thermally broken. Use it to plan a budget before you ask local window installers for written quotes.
The result depends on a reference price per square metre rather than on the exact product you will buy, so treat it as a budget check, not a binding price. A detailed quote will name the profile series, the glazing make-up and the included hardware, and those details can move the price more than any single input in this calculator.
The result updates automatically.
Count aluminium windows and glazed doors
Bedroom: 1.0–1.4 m (about 3.3–4.6 ft) · Living room: 1.4–2.0 m (about 4.6–6.6 ft)
Bathroom: 0.6–0.9 m (about 2–3 ft) · Bedroom: 1.2–1.5 m (about 3.9–4.9 ft)
Uw ≈ 1.4–2.0 W/(m²·K) · The most common choice · Meets thermal requirements in most cases
Reference price per square metre for the Canadian market, covering materials and fabrication. It varies with glazing type, frame profile and finish, and installation is charged per window. Window sizes are often quoted in feet and inches in Canada, so convert them to metres before entering them (1 ft is 0.3048 m). Adjust the reference price to the written quote you receive.
Covers removal of the old window, fitting, sealing and adjusting the sashes.
Installer's labour for each window replaced.
Estimated total cost
6 windows · 10.1 in total
- Material (manufacturing)
- $3,679
- Installation
- $390
- Total (estimate)
- $4,069
- Area per window
- 1.68 m²
- Total area
- 10.1 m²
- Price used
- $365/m²
How it works
Formula
How the calculation works
Aluminum window cost: what sets the price
Windows affect comfort, noise and energy use more than most renovation budgets allow for. When the exterior of a home is renovated, window replacement is often one of the largest line items, and owners who estimate it from a single number are often surprised by the final quote. Knowing what makes up the price before you ask for quotes helps you compare them fairly and spot the choices that matter most.
How the formula works
The calculator uses C = N × (L × H) × Pavg + N × Pinst. Each window's area is its width multiplied by its height (L × H). Multiplying that area by the number of windows (N) gives the total glazed area of the set, and multiplying the total area by the average price per square metre (Pavg) gives the cost of the windows themselves. The last term, N × Pinst, adds installation for each window, but only when the installation option is turned on.
Take ten windows that are 1.2 m wide and 1.5 m high. Each one measures 1.8 m², so the set has 18 m² to price. If the installation option is off, the installation term is zero and the estimate covers the windows alone. If it is on, the installation charge is added once for each of the ten windows.
The formula assumes that all windows in the set are the same size. Real homes rarely are, so use average dimensions only when the sizes are close. If you have one large window beside several small ones, calculate each group separately and add the results. An average hides large differences, and a single oversized window can change the total more than the average suggests.
Edge cases are simple. A count of zero gives a zero estimate. A width or height of zero means there is no window to price, so it should not be entered. Installation set to zero means the estimate covers windows only, without labour.
The frame: with or without a thermal break
The frame is the aluminum structure that holds the glass and fixes the window to the wall. A standard aluminum frame is one continuous extruded piece, which is simpler and usually cheaper. Aluminum conducts heat well, so in winter the inside face of a standard frame can drop to a temperature where moisture from indoor air condenses on it. Repeated condensation can lead to damp sills and, over time, mould in the corners of rooms, especially in kitchens and bathrooms where humidity is high.
A thermally broken frame has a polyamide insulating barrier between the interior and exterior aluminum sections. This barrier interrupts heat flow through the frame, which keeps the inside surface warmer and reduces the risk of condensation. Thermally broken frames usually cost more than standard frames. Whether the extra cost pays off depends on the climate, the heating system and how the home is used, but it is often a sensible choice for living spaces in cold regions, such as a detached house in Winnipeg or a bungalow in Ottawa, where the difference between indoor and outdoor temperatures lasts for many months each year.
Building codes add a further consideration. The National Building Code of Canada 2020 (NBC) is a model code published by the National Research Council. It is not federal law. Each province and territory adopts and amends it, often through its own building code, such as the Ontario Building Code under the Building Code Act, 1992, or the Québec construction code. The energy requirements in these codes can set limits on the thermal performance of windows in new construction and in some renovation work. Confirm the requirements that apply to your project with your local building authority before you choose a frame.
Glazing: single, double, and low-E
Single glazing uses one pane of glass, typically 4 or 6 mm thick. It has very limited insulating value and only suits spaces that are not heated, such as a three-season sunroom or a storage area. It is not a sensible choice for a room you heat.
Double glazing, also called an insulated glass unit (IGU), uses two panes separated by a sealed airspace that is usually filled with argon. The spacer between the panes and the seal around its edges are part of the performance, because a weak seal lets moisture in and the unit fogs over. Double glazing is the usual baseline for new construction and for most replacement projects.
Low-E double glazing adds a microscopically thin coating, usually on one of the inner surfaces of the unit, that reduces radiant heat transfer. In winter it reflects heat from the room back inside. In summer it can reduce solar heat gain, depending on the coating and the window's orientation. The benefit depends on the climate and on how much direct sun the window receives, so the effect is greater for some rooms than for others.
A typical quote specifies the composition of the unit, for example 4/16 Argon/4 low-E, which means 4 mm glass, a 16 mm argon-filled airspace and 4 mm glass with a low-E coating. Ask the installer to confirm which surface carries the coating.
Market tiers, not exact prices
Aluminum window profiles are supplied to regional fabricators, who cut, assemble and glaze the windows in a workshop before installation. Product lines differ in profile thickness, reinforcement, hardware and warranty, so two windows of the same size can cost differently even when both are described as aluminum.
The table below groups window types into qualitative market tiers. It does not give prices.
| Window type | Market tier |
|---|---|
| Aluminum, single glazing, standard frame | Entry level |
| Aluminum, double glazing, standard frame | Entry to mid-range |
| Aluminum, double glazing, thermally broken frame | Mid-range |
| Aluminum, double glazing with low-E, thermally broken frame | Mid-range to premium |
Enter the price per square metre that a local installer quotes for your chosen configuration. The calculator is only as accurate as that input.
Installation
Installation is usually charged per window on ordinary jobs. Large or heavy units, difficult access, upper floors and the removal of an old frame from masonry or stone can each add significant labour. Ask the installer to confirm what the installation price covers, including removal and disposal of the old windows, the exterior sill, perimeter sealant, flashing and interior and exterior trim.
Common mistakes when ordering
Measuring the wrong opening. The dimension to give the installer is the rough opening, measured from wall to wall, minus the clearance the manufacturer requires for shims and insulating foam. Using the size of the old window as the reference is risky, because old openings can be out of square or poorly framed. Measure the opening at several points, record the smallest width and height, and give those figures to the installer.
Comparing quotes without specifications. Two quotes with the same price per square metre can describe different products. Ask for the profile series name, the composition of the glazing unit, and the air leakage and water penetration results under CSA A440, the Canadian standard for windows. Ask for the test report or certificate as well.
Forgetting what is included. Hardware, locks, the sill, sealant and weatherstripping are included in many quotes but not in all of them. Confirm the full list before you sign anything.
Overlooking egress requirements. Bedrooms in an unsprinklered suite must have at least one window or door to the outside that can be used as an emergency exit. Sentence 9.9.10.1.(1) of Division B, Part 9 of the National Building Code of Canada 2020 sets this rule, and provincial codes adopt it in their own wording, as the Ontario Building Code does. The rule also covers a minimum clear opening and limits on sill height. Some window styles, such as awning windows, may not give enough clear opening for escape, so check the opening size of the specific unit. This calculator does not check those rules, so a window that fits the estimate may still need to be larger. Confirm the requirements with your local building authority, and read the official text of the National Building Code of Canada 2020 on the NRC Codes Canada site.
When to use this calculator and when not to
Use it to plan a budget for a set of standard rectangular windows of similar size. It is not designed for curved or irregular shapes, skylights, sliding or patio doors, storefronts, heritage windows or specialized glazing. These are priced differently and need a dedicated quote. It also does not replace a technical review. If your project affects a large part of the home's exterior walls, or if you are changing the size of an opening, the building authority may require drawings, a permit or a professional review.
Permits, standards and product certification
Replacing windows like for like is often a simpler project, but changing the size of an opening or altering the structure around it can require a permit and a structural check. Your municipality decides which projects need a permit. Ask the window supplier for the product's certificate and performance declaration, and keep a copy with your project file.
Sales taxes and budgeting
The calculator does not add sales taxes. The federal goods and services tax (GST) applies to most purchases, and provincial sales tax or the harmonized sales tax (HST) applies depending on where you live. Check the current rates with the Canada Revenue Agency and your provincial or territorial government, and add them to the estimate.
Using the estimate
The result is a planning figure. Use it to set a budget range, to check whether a quote is within a reasonable range, and to prepare a clear request for quotes. Ask for at least two or three written quotes from installers who can show comparable completed jobs, and compare them on the same specification, not on the total alone.
Frequently asked questions
What determines the cost of aluminum windows in Canada?
The cost depends mainly on three things: the glazing (single, double or double with low-E), the frame (standard or thermally broken) and the size of the windows. Double glazing with a thermally broken frame is a common mid-range choice for renovation projects, and low-E glazing moves the same frame toward the premium end. Installation is usually charged per window, and difficult access, large or heavy units and removal of an old frame increase that charge. Enter the number of windows and their average width and height to get a total estimate, then add installation if it is not included in your quote.
Is a thermal break worth paying more for in a Canadian home?
In most cold-climate homes, a thermally broken frame is worth considering, because it keeps the inside face of the frame warmer and reduces condensation and the risk of damp and mould around the window. The extra cost is usually higher than for a standard frame, and any saving on heating bills depends on the climate, the heating system and how the home is used. In milder areas the benefit is smaller, so the choice depends on the room and the local climate. Ask the installer for the frame's performance results, and check whether your local building requirements set a minimum for the project.
What is the difference between standard double glazing and low-E double glazing?
Both use two panes of glass with a sealed airspace, usually filled with argon. Standard double glazing reduces heat loss compared with single glazing. Low-E double glazing adds a thin coating that reflects radiant heat, which reduces heat loss further in winter and can limit solar heat gain in summer, depending on orientation. The price difference is noticeable, and the benefit depends on the climate, how much sun the window receives and how the home is heated and cooled. For rooms that get strong afternoon sun or are heated on cold days, low-E glazing is often worth considering. Ask the installer to state the composition of the unit and which surface carries the coating.
How can I tell if an aluminum window system is good quality?
Do not judge quality by the name of the profile alone. Look for documented performance results for air leakage, water penetration and structural performance, tested to CSA A440, the Canadian standard for windows. Ask for the test report or the product's certificate, and check that the results apply to the exact series and glazing you are buying. Workmanship matters just as much, because a well-made frame installed with poor sealing and flashing can still leak. Ask about the installer's experience with similar jobs and the warranty on both the product and the installation.
What should I ask a contractor to compare window quotes properly?
Ask every installer for the same information: the profile series name, the glazing composition (for example 4/16 Argon/4 low-E), whether a thermally broken frame is included, the air leakage and water penetration ratings under CSA A440, the number and sizes of the windows, and a list of what the price includes. The list should cover removal of the old windows, the exterior sill, perimeter sealant, flashing, interior and exterior trim and disposal. Quotes without these details are not comparable, and the lowest price may reflect thinner profiles or lower-performance glass. Get every quote in writing and check how long it stays valid.
Does the building code apply when I replace windows in Canada?
The building code can apply, and the rules come from your province or territory, not from the federal government. Like-for-like replacement is often simpler, but changing the size of an opening or the structure around it can trigger a permit and a structural review. The energy provisions of the National Building Code of Canada 2020, as adopted locally, can set performance requirements for windows in new construction and in some renovations. Sentence 9.9.10.1.(1) of Division B, Part 9 of the same code requires bedrooms in an unsprinklered suite to have at least one window or door to the outside that can be used as an exit. Check with your local building authority before you order windows.
Related calculators
View all Climate & Energy calculators →
By RivoCalc · Reviewed under our editorial methodology · Updated June 3, 2026
This calculator gives an estimate only. Real costs vary with region, window size and product series, glazing make-up, site access, removal of existing frames, labour rates and each installer's terms. Sales taxes are not included. Check the building requirements that apply to your project with your local building authority, and obtain written quotes before you commit.
