Full House Painting Cost Calculator
Estimate the cost of painting a home's walls and ceilings, with materials and labour shown separately and an adjustment for your region.
For a two-bedroom condo of 55 m² (about 590 sq ft) of floor area, the calculator works from roughly 125 m² (about 1,345 sq ft) of painted surface: about 90 m² of wall and 35 m² of ceiling. Those two areas are costed separately, because materials and labour differ for each.
Painting a whole home is one of the renovation jobs that most often comes in over budget. The reason is usually the same: people price the paint, forget the supplies and underestimate the hours. A detached house in Toronto, a townhouse in Calgary and a condo in Vancouver can have similar floor areas and very different painting costs, depending on ceiling height, the number of rooms and how much preparation the walls need.
This calculator splits the total into two components. Materials cover the paint, the primer and the consumables, such as painter's tape, rollers, roller trays, drop cloths and sandpaper. Labour varies with the type of service you choose and with the region where the work is done. The regional adjustment applies to labour only, because it is meant to reflect local labour costs rather than the price of paint.
The result is not a firm quote. A firm price needs a contractor to visit the site and inspect the surfaces. What the calculator gives you is a reasoned estimate that helps you judge whether a quote you have received is reasonable, negotiate with a sense of the likely range, and plan the budget before the job starts. If a quote is far above or below the estimate, ask the contractor to explain the difference line by line.
The explanation below uses metric units; the calculator works in either system.
The result updates automatically.
Total of all the walls. Enter 0 if you're not painting walls.
The same as the floor area of the rooms. Enter 0 if you're not painting ceilings.
Reference rates for the Canadian market: materials and labour per m², for walls and ceilings, before the regional adjustment. Adjust them to the quote you have received.
Estimated total cost
90 m² painted
- Materials — walls
- $420
- Materials — ceilings
- $218
- Labour — walls
- $270
- Labour — ceilings
- $188
- Total area painted
- 90 m²
How it works
Formula
How the calculation works
How to calculate the cost of painting a home in Canada
Painting a home is one of the renovation jobs that most often costs more than people expect. The cost has two separate parts, materials and labour, and each one moves for different reasons. This calculator keeps them apart, applies a regional adjustment to labour only, and gives a realistic range you can check against the quotes you receive. It is built for the interior and exterior walls and ceilings of ordinary houses, condos and townhouses. It is not designed for specialist finishes such as murals, textured plaster or heritage restoration.
Labour: the line that moves the total most
Labour is usually the largest part of a professional painting quote. A painter working alone costs less per hour than a small company, because the company carries the costs of insurance, vehicles, equipment, and the administration of invoices and warranties. A larger painting company with a crew and a formal warranty sits at the top of the price range, and its rate per square metre reflects those overheads. None of these options is wrong. The question is which one fits the size of the job, the time you have, and how much formal protection you want if something goes wrong.
Ceilings cost more to paint than walls. Work with the arms raised is slower and more tiring, and the painter has to keep moving the ladder or scaffold. For that reason the calculator asks for wall and ceiling areas separately and applies a different labour rate to each. If you are comparing quotes, check that each one states its rate for walls and for ceilings. A single flat rate for the whole house hides the difference.
The regional adjustment reflects local labour markets. Wages and the availability of skilled painters differ between metropolitan areas, rural regions and provinces. The multiplier in the formula is meant to capture that difference. It applies to labour only, because the regional variation the calculator is designed for is in wages, not in the price of paint. Choose the region where the work will be done, not where the contractor's head office is.
Materials: what you actually pay for
For a typical interior job with two coats of latex paint and one coat of primer on new or patched drywall, the material cost per square metre depends on the quality tier. A basic tier uses paint without premium features and is the most economical option. A mid-range tier usually offers better hiding power and washability. A premium tier uses specialized formulations and advertises higher coverage, and its cost per square metre is significantly higher. The calculator asks for a quality tier rather than a brand, because brand names change and the tiers are what drive the difference in cost.
Read the coverage stated on the paint container and check it against the actual surface, not only the marketing. Coverage varies with the porosity of the wall, the change in colour and the number of coats needed. A dark colour over a light one usually takes more coats than the same colour over white. Plan for an extra coat when you are changing colour sharply.
Consumables add cost that people often forget. Painter's tape, roller covers, roller trays, drop cloths, sandpaper, filler and cleaning supplies together make up a smaller share of the total than the paint, but they are never zero. Forgetting them is one of the most common reasons a do-it-yourself budget runs over at the checkout. Include them in the budget from the start.
Doing it yourself or hiring a painter
Doing the work yourself removes the labour cost entirely, but it carries a cost that does not appear on any invoice: time. Preparing and painting a room with about 20 m² of wall, with proper preparation and two coats, can take a first-time painter a full weekend, and a whole house can take several weekends. The result also tends to vary between rooms. Corners, baseboards, window frames and the edges around switches are where a beginner's finish shows.
Do-it-yourself makes sense for a single room, a hallway or a bedroom where the budget is tight and the time is available. For a full home, hiring an experienced painter is often the more practical option, even after paying for labour. A painter who works every week usually prepares surfaces more consistently, cuts in faster and finishes in less time. This is a judgment about the job, not a rule, so compare the hours you would need against the hours a contractor would take.
How to compare quotes
Get at least two or three written quotes. Prices vary a lot, and the lowest quote is not always the one with the best preparation or the most careful work. A clear quote states the number of coats, the paint type and product line, the surface area being charged for, and whether surface preparation is included. Preparation covers cleaning, sanding, filling cracks and holes, and applying primer where needed. If preparation is listed as an extra, ask what it costs and what it includes.
Ask how the contractor prepares surfaces before you hire them. A contractor who explains the steps, from cleaning to sanding to filling to priming, is usually one who has thought about how the paint will last. If the answer is vague, treat that as information.
Ask for an invoice. In Canada, a business registered for the Goods and Services Tax (GST) must charge it on its services, and where it applies, the Harmonized Sales Tax (HST), the Provincial Sales Tax (PST) or the Quebec Sales Tax (QST), depending on the province. The Canada Revenue Agency (CRA) sets the registration rules and the tax treatment. Work paid without an invoice leaves you without a record if the finish fails or a dispute arises, so the saving may not be worth the risk.
Preparation and moisture
Preparation is the step that most affects how long a paint job lasts. Poorly prepared surfaces peel, blister or show marks within a short time, and no quality of paint can correct that. Before painting, clean the surface, remove loose paint, sand glossy areas so the new coat can bond, and fill cracks and holes.
Some surface problems are not paint problems. Damp patches, bubbling, widespread peeling or visible mould on a wall are signs of moisture. Painting over active moisture seals it in and usually hides the problem until it returns. In these cases the cause has to be identified and fixed before any paint is applied, and depending on the cause, that may mean working with a building professional. The National Building Code of Canada is a model code, not federal law. Each province and territory adopts it with its own amendments, so local building authorities can have additional requirements and are the right contact for questions about a specific building.
Edge cases and common mistakes
Enter zero for the ceiling area if you are not painting ceilings. The calculator then gives only the wall part of the total. Entering zero for both areas gives a total of zero, which is correct but not useful, so enter at least one area. A negative area has no physical meaning and should not be entered. The regional multiplier should match the region of the job, because a default set for a different region understates or overstates the labour part of the result.
Common mistakes include measuring only the floor area and forgetting the walls, which in a typical room are usually several times the floor area; leaving out the ceilings; forgetting a second coat when the colour changes sharply; and comparing quotes that do not include the same surface preparation. Measure each wall as its length multiplied by its height, subtract large openings such as doors and windows, and add the results.
Local norms and public sources
Painting work is not governed by a single national standard, so no single figure fixes what a job must cost. The useful public references are the price and wage statistics that Statistics Canada publishes by province and metropolitan area, and the tax rules administered by the Canada Revenue Agency. For the building side, check the model code as adopted by your province or territory. This calculator produces an estimate. It does not replace a written quote from a qualified contractor who has seen the job.
Frequently asked questions
How do I estimate the cost of painting a house?
Start with the surface area. A two-bedroom condo of 55 m² (about 590 sq ft) of floor area might have roughly 90 m² of wall and 35 m² of ceiling to paint, which is the kind of breakdown the calculator asks for. Enter the wall and ceiling areas, choose who will do the work, select the quality tier of the materials and pick your region. Then compare the result with the quotes you receive. The estimate is a starting point for the budget and for judging quotes, not a firm price, since a contractor has to see the surfaces before pricing the job.
Do ceilings cost more to paint than walls?
Yes, usually. Painting a ceiling means working with the arms raised, moving the ladder or scaffold more often and keeping the paint even overhead, so the work is slower and more tiring than painting a wall of the same area. For that reason the calculator applies a separate labour rate to ceilings. When you compare quotes, check whether each one states a rate for walls and a rate for ceilings, or whether it uses a single flat figure that hides the difference.
What is the difference between hiring an independent painter and a painting company?
An independent painter usually has the lowest labour rate, because the business carries fewer overheads. A small company that issues invoices and carries insurance costs more per hour, but it gives you a formal record and a clearer route to a complaint. A larger company with a crew and a formal warranty sits at the top of the range. For a small job, an experienced independent painter with good references can be the most practical choice. For a larger job, a company is often more predictable on timing and quality. Ask any painter for proof of insurance and a written warranty before you agree to the work.
Is it cheaper to buy the materials and hire only the labour?
It can be, but not always. Many painters buy materials at trade pricing that a homeowner cannot match, so the materials they charge you may cost about the same as buying them yourself. The main advantage of buying separately is that you can choose the exact paint, for example a specific sheen or a product the painter does not usually stock. Ask the painter whether they will work with materials you supply, and whether they will still warranty the finish when they do. Some will not, because they cannot control the quality of the product.
When does a do-it-yourself paint job make sense?
A do-it-yourself job makes sense for a single room or a small area where you have the time and the budget is tight. It is harder to justify for a whole home. A full house needs many hours of preparation and painting, and beginners often find that corners, baseboards and window frames show the most. Before you start, estimate the hours it will take you, not just the cost of the paint. A practical test is to paint one room first and time it, then multiply that time across the rest of the house and decide from there.
When should I call a professional before using this calculator?
The calculator gives a cost estimate and does not replace an inspection. If the walls show damp patches, bubbling, widespread peeling or mould, the cause has to be found and fixed before any paint goes on, because painting over active moisture usually hides the problem rather than solving it. In those cases a building professional or a qualified contractor should diagnose the cause first. Once the cause is fixed, return to the calculator and enter the areas for the repaint. Your local building authority can tell you whether a permit applies to the work.
Related calculators
Ceiling Paint Calculator: Litres Needed
Calculate the litres of ceiling paint you need. Enter the room dimensions, the paint coverage and the number of coats, and get the result right away.
Exterior Paint Calculator by Surface Type
Calculates the litres of exterior paint and primer a wall needs. Coverage adjusts for smooth stucco, textured finishes and porous brick or stone.
View all Paint & Coatings calculators →
By RivoCalc · Reviewed under our editorial methodology · Updated May 12, 2026
This calculator gives an estimate only. Actual costs depend on the condition of the surfaces, the materials you choose, labour rates in your area and each contractor's pricing. Obtain written quotes before you commit to any work.
