Skip to main content

Garden Soil Calculator: Cubic Metres, Tonnes and Bags

Works out the volume of garden soil or growing medium in cubic metres, tonnes and 40 L bags, with an estimated cost.

To fill a bed measuring 2 m by 3 m to a depth of 20 cm with topsoil, you need 1.2 m³. That volume is 30 bags of 40 L and roughly 1.32 t of material. The same volume of all-purpose growing medium weighs about 0.78 t, a difference of 540 kg that determines how you plan the delivery.

Converting cubic metres to 40 L bags is direct, since one cubic metre holds 25 bags. The weight, however, depends heavily on the material. The calculator uses planning densities of about 1.1 t/m³ for topsoil, 0.65 t/m³ for all-purpose growing medium and 0.45 t/m³ for peat-based mix. The real figure depends on moisture and on the supplier's data sheet, and a cubic metre of topsoil is heavier than most passenger cars can carry, so a single cubic metre usually means several car trips or one truck delivery.

Enter the length and width of the area, the depth of the layer and the type of material. The calculator returns the volume in cubic metres, the number of 40 L bags rounded up to whole bags and the total weight. Many suppliers still quote bulk soil in cubic yards, so convert the figure before comparing quotes.

Treat the result as a starting point. Measure the area inside any edging, add a margin for settling and check the depth against the plants you plan to grow. The sections below cover the depth for each planting type, the difference between bags and bulk delivery, and the mistakes that lead to a second delivery.

The result updates automatically.

For irregular beds, use the maximum dimension and scale the width proportionally.

Measure in a straight line, edge to edge.

Lawn: 4–6 in (about 10–15 cm) · Beds and shrubs: 8–12 in (about 20–30 cm) · Vegetable patch: 12–16 in (about 30–40 cm) · Trees: 16–24 in (about 40–60 cm)

This affects the total weight and reference price. Multi-purpose compost is the most common choice for home gardens.

Reference value for this type of substrate. Adjust to match the quote you've received. Enter 0 to ignore the cost.

Topsoil needed

4.00m³

Area: 20.00

Equivalent in 40 L bags

100bags

Approx. total weight: 2.60 t

Estimated material cost

$320.00

For 4.00 at $80.00

Area
20.00 m²
Topsoil volume
4.000 m³
40 L bags needed
100 bags
Estimated total weight
2.60 t

Turn this calculation into a quote for your client

We're building a tool for professionals. Be among the first to try it.

Share

How it works

1

Enter the length and the width of the area to fill, in metres.

2

Set the depth of the layer: 10 to 15 cm for lawns, 20 to 30 cm for garden beds and 30 to 40 cm for vegetable gardens.

3

Choose the type of material, since it changes the total weight and the reference density.

Formula

V = C × L × (P ÷ 100) | S = ⌈V × 25⌉ | M = V × d
V — Volume of soil in cubic metres (m³)
C — Length of the area (m)
L — Width of the area (m)
P — Depth of the soil layer (cm)
S — Number of 40 L bags, rounded up to whole bags
M — Total mass in tonnes (t): volume × density of the material
d — Planning density in t/m³, to be replaced with the supplier's figure: topsoil ≈ 1.1 · all-purpose growing medium ≈ 0.65 · peat-based mix ≈ 0.45
⌈⌉ — Round up: whole bags are always ordered

How the calculation works

How to calculate garden soil: volume, bags and cost

Preparing a garden bed starts with working out how much material you need. The most common and most expensive mistake is underestimating the amount, especially when you order bulk topsoil by the truckload. A second delivery usually costs as much as the first, and it can take days to arrange.

The formula: simple, with one detail that matters

The volume of soil comes from three measurements: the length and width of the area, and the depth of the layer you are adding. A vegetable garden 5 m long and 4 m wide, filled to 30 cm, needs 5 × 4 × 0.30 = 6 m³ of soil. The depth has to be converted from centimetres to metres before it is multiplied, and this is the step people most often get wrong when they check a result by hand. Skip the conversion and the volume comes out 100 times too large.

The number of bags follows from the volume, since one cubic metre holds 25 bags of 40 L. The 6 m³ bed above therefore needs 150 bags. Bags are always rounded up to whole units, so a volume of 6.1 m³ needs 153 bags, not 152.5. The total weight depends on the material: 6 m³ of topsoil at about 1.1 t/m³ weighs 6.6 t, while the same volume of all-purpose growing medium at about 0.65 t/m³ weighs 3.9 t.

Settling is the detail that the formula cannot capture. Loose soil compacts over the first weeks and months after it is placed, and freeze and thaw cycles over a Canadian winter speed up the process. For this reason it is sensible to order a margin above the calculated volume when buying bulk topsoil, and to top up beds in spring once the soil has settled. Bagged growing medium is usually more consistent and settles less, so a smaller margin is generally enough.

Bags or bulk delivery

Bags are the practical choice for small volumes, around a cubic metre or less. They fit in a car or a small trailer, you can work at your own pace, and any leftover can be stored without fuss. The price per cubic metre of bagged product is, however, considerably higher than bulk.

For larger volumes, bulk delivery makes more economic sense. Topsoil from regional landscape supply yards, gravel pits and aggregate suppliers arrives by dump truck, and the price per cubic metre is usually well below that of bagged product, even after the delivery charge is added. Compare quotes carefully, though. Check whether the price is per cubic yard, per cubic metre or per tonne, whether there is a minimum load, what the delivery fee is, and whether spreading is included. A price per tonne depends on moisture content, so a wet load and a dry load of the same volume can weigh different amounts.

Access is often the real constraint. A dump truck needs a clear route to the site and a safe place to tip the load, which can be difficult on narrow urban lots, behind fences or through a side gate. Measure the access before you order, and check whether the driveway or street can take the load.

Types of material and what to choose

Three categories are common in Canadian garden centres and landscape yards.

Topsoil: collected from natural soils, screened and sometimes enriched with compost. It is the heaviest of the three options and usually the cheapest in bulk. It suits filling large areas, levelling ground and preparing vegetable plots. Its pH depends on where it came from, so a soil test is worth doing before planting acid-loving or lime-loving crops. Soil pH can be measured in a laboratory using the method in ISO 10390, the international standard for soil pH determination.

All-purpose growing medium: a formulated mix of peat or coir, perlite, compost and slow-release fertilizer. It is lighter, more porous and better at holding moisture than topsoil. It is the most widely sold option for home gardens and the most balanced choice for flower beds, herbs and outdoor containers. Read the label for the proportion of compost and whether the mix contains peat.

Peat-enriched premium mix: a higher concentration of sphagnum peat and micronutrients, intended for acid-loving plants such as rhododendrons, azaleas and blueberries, and for high-performance container growing. For an ordinary garden, the difference in performance over all-purpose growing medium rarely justifies the extra cost. Peat harvesting affects wetland ecosystems, so many gardeners now choose peat-free mixes for general use.

Depth by planting type

The depth of the new layer decides how much to order. Lawns grown from seed need the shallowest layer, because grass roots stay near the surface. Flower beds need more depth so that the roots of annuals and perennials have room to grow before reaching compacted native ground. Vegetable gardens need deeper soil still, and root crops need the most, since their roots grow straight down and stop at any hard layer. Shrubs and hedges also need deep, good soil at planting, which prevents rooting problems in the first years, especially in the heavy clay found in parts of southern Ontario. The depth presets in this calculator are planning starting points, not a standard. Check them against the seed, sod or plant supplier's guidance and against the root depth of the plants you intend to grow. In much of Canada spring is short, so have the soil in place before the planting window opens.

Drainage and compaction: what the tables leave out

Adding new soil on top of existing ground creates a boundary. Water collects at the interface between the two layers, and if the base does not drain, the result is waterlogging and root rot. This is most common on heavy clay. The simplest remedy is to loosen the existing ground with a digging fork or broadfork before adding the new layer.

For heavy clay, mixing coarse washed sand into the base improves drainage. Use a proportion informed by a soil test or advice from a landscape professional rather than a fixed ratio. Never use beach sand, which contains salt. On sloped ground or in formal beds, a geotextile membrane laid at the base keeps the two soils from mixing without blocking drainage.

Urban lots and raised beds

Many urban gardens, especially in older neighbourhoods, sit on fill: builder's rubble, old concrete, gravel or soil brought in during earlier construction. When the base is unknown, a raised bed with timber or block walls is often more practical than digging, and it gives better control over drainage. Measure the inside of the frame when you calculate the volume, since the outside dimensions overstate the amount of soil needed. Test urban soil with an unknown history before growing food crops in it, because older lots can contain lead and other contaminants.

Edge cases and when not to use this calculator

The calculator treats the area as a single rectangle with an even depth. For a circular bed, an irregular shape or a bed with sloped sides, split the area into simple shapes, calculate each one and add the volumes. A zero depth or a zero area gives a zero volume, and negative values have no physical meaning, so check your inputs if the result looks wrong.

The calculator does not account for ground slope, the volume taken up by stones or roots, or the thickness of mulch. Subtract those yourself where they matter. Shaping a sloped lawn is different: the amount of soil then depends on the difference in levels across the site, which requires a survey rather than a single depth figure.

Common mistakes

Four errors come up again and again. The first is entering the depth in centimetres in the metre field, or forgetting the conversion when checking by hand. The second is using the weight of bagged growing medium for a bulk order of topsoil. The third is ordering the exact bag count with no margin for settling. The fourth is comparing prices in different units: a cubic yard is about 0.76 m³, so a price quoted per cubic yard works out higher per cubic metre than the same number suggests.

When to hire a professional

This calculator sizes the material; it does not design the garden. For projects above 100 m², changes in grade, automatic irrigation, integrated paving or structural work, a landscape architect is usually the more economical route over the medium term. Look for one with professional credentials recognized in your province. Before building a retaining wall or changing the grade near a house foundation, check with your municipality whether a permit is needed, since the rules vary from one municipality to another, and grading soil against a foundation changes where water flows. A professional avoids drainage errors, plants that do not suit your climate zone and maintenance problems that appear years later.

Frequently asked questions

How many 40 L bags of soil do I need per square metre of garden bed?

It depends on the depth. At 20 cm, each square metre needs 0.20 m³ of soil, which is 5 bags of 40 L. At 30 cm, it needs 0.30 m³, or 7.5 bags, so you would order 8 bags per square metre. Since one cubic metre holds 25 bags, the count is simply the volume multiplied by 25, rounded up to whole bags. Enter your actual length, width and depth into this calculator to get the exact number for your bed.

What is the difference between topsoil and all-purpose growing medium?

Topsoil is collected from natural soil, screened and sold mostly in bulk. It is the heavier of the two and cheap per cubic metre, which suits filling large areas and levelling ground. All-purpose growing medium is a formulated mix of peat or coir, perlite, compost and slow-release fertilizer. It is lighter, drains better and feeds plants from the start, which makes it a better choice for flower beds, herbs and containers. For large vegetable plots or lawns, bulk topsoil is usually the more economical option.

How much does garden soil cost in Canada?

Prices vary by region, supplier and delivery distance, so this calculator cannot give a reliable price on its own. Bagged growing medium costs more per cubic metre than bulk topsoil from a landscape supply yard, and the gap widens as the volume grows. Bulk delivery often works out cheaper for larger projects, even after the delivery charge, though minimum loads and spreading costs also count. Get two or three quotes, enter the price per cubic metre from the one you choose into the price field, and compare the total with the bagged option.

How deep should soil be for sowing grass seed?

For sown lawn grasses such as fescue, ryegrass or Kentucky bluegrass blends, the depth of prepared soil should follow the recommendation on the seed packet or from your turf supplier, since it varies with the mix and the site. Sod laid in rolls needs a levelled base rather than a deep layer. Where the native ground is very heavy clay or very sandy, mix compost or coarse washed sand into the base soil before adding the final layer. Use the depth presets in this calculator as a starting point only.

Is it better to order bulk soil or buy bags?

For small volumes, roughly one cubic metre or less, bags are the practical choice. They fit in a car or small trailer and can be stored and used at your own pace. For larger volumes, bulk delivery by dump truck is almost always cheaper per cubic metre than bags, but it needs a clear route to the site and somewhere to tip the load. Before you order, check whether the supplier quotes by volume or by weight, whether there is a minimum load and whether spreading is included.

When should I hire a landscape architect?

For simple projects such as filling a single bed, building a small vegetable garden or sowing a lawn, this calculator and some research are enough. A landscape architect is worth the cost when a project involves changing the grade of the land, automatic irrigation, integrated paving or areas above about 100 m². A professional helps avoid drainage errors, plant choices that do not suit the local climate and maintenance problems that appear after a few seasons. Look for credentials recognized in your province.

View all Garden, Outdoor & Water calculators →

By RivoCalc · Reviewed under our editorial methodology · Updated June 11, 2026

Results are estimates for planning purposes. Real volumes depend on settling, compaction, the moisture content of bulk material and the shape of the area, and real costs depend on the supplier, delivery and local prices. Confirm quantities and prices with your supplier before you order.