Constant Amortisation Calculator with Monthly Schedule
Calculates declining instalments under constant amortisation, with a month-by-month schedule of interest, capital repaid and balance outstanding.
On a 20-year loan at a 6% annual nominal rate, which means 240 monthly instalments, constant amortisation makes the first instalment about 2.2 times the fixed capital repayment and the last one about 1.005 times it. Every instalment repays the same slice of capital, so the total falls each month as interest on the shrinking balance falls.
Constant amortisation, also called the constant principal method, is a way of repaying a loan in which the capital part of each instalment never changes. You divide the amount borrowed by the number of monthly instalments to get that fixed part, then add the interest charged on the balance still owed. Because the balance falls every month, the interest falls too, and the total instalment declines steadily from the first payment to the last.
This calculator takes three inputs: the amount borrowed, the term in years and the annual nominal interest rate. It shows the first and last instalments straight away and builds the full schedule, so you can check the interest, capital repaid and balance outstanding for any month of the agreement. The full schedule also shows how much the repayment structure changes the picture, even when the rate stays the same.
Constant amortisation is more relevant to specialist and business lending, or to comparing an offer with a level-payment alternative. Used that way, the calculator is a check on the lender's figures, not a replacement for the pre-contract documents, which set out the binding costs and terms.
Over the full term, a constant amortisation loan usually costs less in interest than a level-payment loan of the same amount, rate and term. The trade-off is a higher first instalment, which needs more spare income in the early years.
The explanation below uses metric units; the calculator works in either system.
The result updates automatically.
Total amount to borrow
Term of the agreement (1 to 50 years)
Nominal interest rate of the agreement (0% to 30%)
First repayment
The highest repayment of the agreement, paid in the first month
- Fixed monthly repayment
- £416.67
- Final repayment
- £418.19
- Total interest paid
- £99,275
- Total paid over the life of the loan
- £249,275
Monthly repayment schedule
| Month | Repayment | Interest | Principal | Outstanding balance |
|---|---|---|---|---|
| 1 | £966.67 | £550.00 | £416.67 | £149,583.33 |
| 2 | £965.14 | £548.47 | £416.67 | £149,166.67 |
| 3 | £963.61 | £546.94 | £416.67 | £148,750.00 |
| 4 | £962.08 | £545.42 | £416.67 | £148,333.33 |
| 5 | £960.56 | £543.89 | £416.67 | £147,916.67 |
| 6 | £959.03 | £542.36 | £416.67 | £147,500.00 |
| 7 | £957.50 | £540.83 | £416.67 | £147,083.33 |
| 8 | £955.97 | £539.31 | £416.67 | £146,666.67 |
| 9 | £954.44 | £537.78 | £416.67 | £146,250.00 |
| 10 | £952.92 | £536.25 | £416.67 | £145,833.33 |
| 11 | £951.39 | £534.72 | £416.67 | £145,416.67 |
| 12 | £949.86 | £533.19 | £416.67 | £145,000.00 |
How it works
Formula
How the calculation works
Constant amortisation, also called the constant principal method, is a way of repaying a loan in which the capital part of each instalment stays the same from the first month to the last. Because the balance owed falls every month, the interest charged on it falls too, so the total instalment declines steadily over the term. This calculator shows that pattern for any amount, term and rate, and produces a month-by-month schedule of interest, capital repaid and balance outstanding.
How each instalment is calculated
The calculation starts by dividing the amount borrowed, C, by the number of monthly instalments, n. The result, A, is the fixed capital repayment made each month. The number of instalments is the term in years multiplied by 12, so a 20-year loan has n = 240. A is the same in every month of the agreement, and it is the only part of the repayment that never changes.
Interest is added on top of A. For instalment k, the interest J(k) equals the balance outstanding before that payment, S(k−1), multiplied by the monthly rate r. The monthly rate is the annual nominal rate, expressed as a percentage, divided by 1,200. A 6% annual rate therefore gives r = 0.005. The total instalment is P(k) = A + J(k), and after each payment the balance falls by A, so S(k) = S(k−1) − A.
Take a 20-year loan at 6% as an illustrative worked example, not a market rate. Here n = 240 and r = 0.005, so the capital repayment is the amount borrowed divided by 240. In the first month the balance is the full amount, so the interest is 0.005 × C, which equals 1.2 × A. The first instalment is therefore A + 1.2A = 2.2 × A. In the last month, 239 capital repayments have already reduced the balance to A, so the interest is 0.005 × A and the final instalment is 1.005 × A. The first instalment is roughly 2.2 times the last one, and the gap between them is set by the term and the rate, as discussed below.
Total interest over the whole term can be found without adding each month separately. The balance before each instalment runs from the full amount down to A in equal steps, and the sum of those balances is C × (n + 1) / 2. Multiplying by the monthly rate gives total interest of r × C × (n + 1) / 2. For the worked example, that is 0.005 × 241 / 2 = 0.6025 times the amount borrowed, so total interest is about 60% of the capital.
Constant amortisation versus level payments
A level-payment (annuity) loan keeps the total instalment fixed for the whole term, and this is the structure used by most UK residential mortgages. For the same amount, 240 months and 6%, the level instalment is about 0.00716 times the amount borrowed, and total interest is about 72% of the capital. The two methods repay the same capital over the same period, so the difference lies in timing.
With level payments, early instalments are mostly interest and later ones are mostly capital. Constant amortisation reverses that logic: capital is repaid at a steady pace from the start, so the balance falls faster in the early years and interest falls with it. That faster reduction is why total interest is lower. In the worked example it is about 60% of the capital against about 72% under level payments, a difference of roughly 12 percentage points of the amount borrowed.
The cost of that saving is a higher start. In the worked example the first instalment under constant amortisation is about 28% above the level instalment, while the last one is about 58% of it. A borrower who expects a fall in income, or who has a tight budget in the early years, may find the first instalments hard to meet even though the total cost is lower.
Practical use in the UK
Constant amortisation is not the usual structure for UK residential mortgages. It is more often seen in specialist and business lending, where a declining payment can suit a borrower whose income or cash flow is strongest at the start of the term. Anyone offered a loan with this structure should confirm the repayment method in writing and check that the schedule in the contract matches the one produced here.
The main use of this calculator is comparative. It shows how the early instalments compare with a level one, how quickly the balance falls, and how much the total interest changes when the term or the rate changes. It is also useful for checking a schedule that a lender or broker has supplied, since the calculation is short enough to reproduce by hand.
Regulated mortgage and consumer credit products in the UK are overseen by the Financial Conduct Authority (FCA), and its Handbook sets the rules that apply to them. Under the Mortgage Conduct of Business (MCOB) and Consumer Credit (CONC) sourcebooks, lenders must provide pre-contract information that sets out the key terms, including the representative APR, and that document is the authoritative source for the cost of borrowing. Where a rate is variable and linked to the Bank Rate or to a benchmark such as SONIA, the rate can change during the term and the schedule has to be recalculated at each change.
What affects the shape of the schedule
The term has the greatest effect on the gap between the first and last instalment. The ratio between the two is (1 + r × n) divided by (1 + r). A longer term increases n and widens the gap, while a shorter term narrows it. The worked example gives (1 + 0.005 × 240) / 1.005, which is about 2.19 and matches the figure above.
The rate also affects the gap, because a higher rate increases the interest part of the first instalment. It changes the level of every instalment, but the declining profile holds for any positive rate. Only a zero rate produces a flat schedule.
Increasing the amount borrowed scales every instalment and every balance in the same proportion. It does not change the shape of the schedule, the ratio between the first and last instalments, or the share of the capital paid as interest.
Edge cases
With a zero interest rate, the interest part of every instalment is zero, so each instalment equals A and the schedule is flat. With a term of one monthly instalment, the single payment clears the balance in full, equal to the amount borrowed plus one month's interest. A term of zero months produces no instalments and the formula divides by zero, so no result can be given. A zero amount gives zero for every instalment and every balance. A negative amount has no meaning for a loan and should not be entered.
When to use this method, and when not to
Use the calculator to compare repayment structures, to test an offer, or to check a schedule supplied by a lender or intermediary. It also helps explain why affordability in the early years matters more under constant amortisation than under level payments.
Do not use it as the final figure for the cost of borrowing. The results assume a constant rate across the whole term. Insurance, arrangement fees, valuation fees and early repayment charges are not included. For a variable-rate product, the schedule must be run again whenever the rate is reviewed.
Common mistakes
The most frequent error is entering the term as months when the input expects years, which understates the number of instalments by a factor of twelve. Using the annual rate directly as the monthly rate is another, and it multiplies the monthly interest roughly twelvefold. Treating the headline interest rate as the full cost of borrowing is a third mistake, because the representative APR, calculated under the Consumer Credit (Total Charge for Credit) Regulations 2010, includes certain mandatory charges and gives a fuller picture of cost. Finally, reading only the first instalment can be misleading, since the repayment falls over time and the last instalment is much lower.
Limitations of this calculator
The schedule assumes that the interest rate stays the same for the whole term and that every instalment is paid on time. It does not model payment holidays, overpayments, rate switches or changes to the term. If you plan an overpayment, the schedule from the date of that overpayment needs to be recalculated with the new balance.
For guidance on borrowing, MoneyHelper, run by the Money and Pensions Service, offers free and impartial information. Under the FCA's dispute-resolution rules (DISP), a complaint is normally raised with the firm first, and if the firm does not resolve it, the complaint can be referred to the Financial Ombudsman Service. Before signing any credit agreement, compare the total amount repayable and the total cost of borrowing, not only the size of the first instalment.
Frequently asked questions
What is constant amortisation?
It is a way of repaying a loan in which the capital repaid each month is the same from start to finish. Interest is charged on the balance still owed, so it falls over time, and the total instalment falls with it. The first instalment is the highest and the last is the lowest. The method is also called the constant principal method.
How does constant amortisation differ from level payments?
With level payments, the total instalment stays the same each month while the split between interest and capital changes. Early payments are mostly interest. With constant amortisation the capital part is fixed and the total instalment declines. For the same amount, rate and term, the constant method usually costs less interest overall but needs more money available in the early months.
How is each monthly instalment calculated?
Divide the amount borrowed by the number of monthly instalments to get the fixed capital repayment. Multiply the balance still owed by the monthly rate, which is the annual nominal rate divided by 1,200, to get that month's interest. Add the two to get the instalment. Subtract the capital repayment from the balance to get the amount owed for the next month.
Do UK mortgages use constant amortisation?
It depends on the product. The repayment structure is set by the lender's contract, so check the offer documents to see which method applies. Constant amortisation is more generally associated with specialist and business lending than with standard residential mortgages. Regulated mortgage lending in the UK is overseen by the Financial Conduct Authority under the Financial Services and Markets Act 2000, as amended.
Do I pay less interest overall with constant amortisation?
Yes, for the same amount, rate and term, provided the rate is above zero. The balance falls faster in the early years because every instalment repays the full fixed capital part. In the worked example over 20 years at 6%, total interest is about 60% of the amount borrowed, against about 72% for level payments. Run both figures before deciding, because the gap depends on the rate and term.
When should I get advice before borrowing?
Get advice before signing any credit agreement and before renegotiating an existing loan, and compare the total amount repayable rather than only the first instalment. Under the Financial Services and Markets Act 2000, advising on regulated mortgages and consumer credit is a regulated activity, so the adviser must be authorised by the Financial Conduct Authority. You can check any firm's status on the FCA Register. The Financial Ombudsman Service handles unresolved complaints about financial firms, and MoneyHelper offers free guidance.
Related calculators
Mortgage Amortisation Schedule Calculator UK
Generates the full month-by-month amortisation schedule of a repayment mortgage, showing interest, capital and the balance owed for each instalment.
UK Mortgage Repayment Calculator
Calculates the monthly repayment on a UK capital and interest mortgage from the loan amount, term, reference rate and lender margin.
Mortgage Overpayment Calculator: New Payment and Savings
Work out the new monthly repayment and total interest saved when you overpay part of a UK repayment mortgage, with the term kept the same.
By RivoCalc · Reviewed under our editorial methodology · Updated 26 July 2026
This calculator gives an estimate for information only and is not financial advice. Actual figures depend on your loan agreement and on the terms set by your lender, including fees, insurance and any change in the interest rate. For a decision about borrowing, speak to a firm authorised by the Financial Conduct Authority or to your lender before you commit.
