Skip to main content

Full House Painting Cost Calculator

Estimate the total cost of painting a house, split into materials and labour, with a regional labour adjustment for Ireland.

For a three-bedroom semi-detached house with about 160 m² of wall and 100 m² of ceiling, the surface to paint comes to roughly 260 m². Two coats of emulsion on that area need about 47 litres of paint, assuming a coverage of 11 m² per litre per coat, and one coat of primer on the walls adds about 15 litres more. Replace the coverage figure with the one on the product data sheet before you buy, because coverage varies between products.

Costs are where most budgets go wrong. People buy the tins, pay the painter and then get a final bill that is higher than they expected. The work has two separate parts: materials, which include paint, primer and consumables such as masking tape, roller sleeves, dust sheets and sanding paper, and labour, which is usually the larger share and varies with the type of service and the area. This calculator splits the total into those two parts so you can see where the money goes and check any quote you receive against it.

Walls and ceilings are priced separately because they take different amounts of effort. Ceilings take longer per square metre, since the work is done with the arms raised. For ceilings, the area to enter is usually the floor area of the rooms being painted. Enter zero if you are only painting walls.

The regional adjustment applies to labour only. Labour rates in higher-cost areas, such as a Dublin suburb or a larger city like Cork, are usually above those in rural counties, while material prices vary less from one area to another. The calculator therefore applies its regional multiplier to the labour part of the total and leaves the materials alone.

The result is an estimate, not a quote. A firm figure needs a visit from a painter who can see the surfaces, because preparation, the condition of the plaster and any damp problems change the job considerably. Use the result to judge whether a quote is reasonable and to plan the budget before the work starts.

The result updates automatically.

Total of all the walls. Enter 0 if you're not painting walls.

The same as the floor area of the rooms. Enter 0 if you're not painting ceilings.

Labour and material rates are entered per square metre, before the regional adjustment. Use the figures from your own quotes and from current supplier price lists, and keep wall and ceiling rates separate, because ceilings usually take longer to paint.

Estimated total cost

~€1,095

90 painted

Materials — walls
€420
Materials — ceilings
€218
Labour — walls
€270
Labour — ceilings
€188
Total area painted
90 m²

Turn this calculation into a quote for your client

We're building a tool for professionals. Be among the first to try it.

Share

How it works

1

Enter the total area of the walls to be painted, in square metres. Add up every wall that will be painted.

2

Enter the area of the ceilings to be painted, which is usually the floor area of the rooms. Enter 0 if you are not painting the ceilings.

3

Choose who will do the work: yourself, a self-employed painter or a painting company.

Formula

C_total = (A_w × m_w + A_c × m_c) + (A_w × h_w + A_c × h_c) × r
A_w — Wall area to be painted (m²)
A_c — Ceiling area to be painted (m²)
m_w — Material cost per m² of wall (in euro per m²)
m_c — Material cost per m² of ceiling (in euro per m²)
h_w — Labour cost per m² of wall (in euro per m²)
h_c — Labour cost per m² of ceiling (in euro per m²)
r — Regional labour multiplier (1 is the national reference; above 1 for higher-cost areas, below 1 for lower-cost areas)

How the calculation works

How the painting cost is calculated

Painting a house costs more than most people expect, mainly because the total is made of two separate parts that behave differently: materials and labour. Materials are priced per square metre of surface and do not change with the region. Labour is also priced per square metre, but its rate depends on the surface, the type of painter and the area where the work is done. This calculator keeps the two parts apart so that each one can be checked against your own quotes.

The formula adds the materials for walls and ceilings, adds the labour for walls and ceilings, and multiplies only the labour by the regional factor. In words: the wall area times its material cost, plus the ceiling area times its material cost, gives the materials total. The wall area times its labour rate, plus the ceiling area times its labour rate, gives the labour before adjustment. That labour figure is then multiplied by the regional factor, and the two totals are added together.

Labour: the largest share of the budget

Labour usually accounts for the larger part of an interior painting budget. A professional painter's time covers far more than applying paint. It includes moving furniture, covering floors and fittings, filling cracks, sanding, applying primer, applying two finishing coats, cleaning brushes and rollers, and clearing up. The labour rate per square metre is meant to cover all of that, which is why a quote that only mentions the paint is not a full quote.

Two types of provider are common. A self-employed painter usually has lower overheads and can offer a lower rate, but may not carry public liability insurance or issue a VAT invoice. A painting company generally carries insurance, can provide a written warranty and works with a crew, so its rate per square metre is higher. Neither option is automatically better. For a small job, a reliable self-employed painter with good references is often the most practical choice. For a large job, a company can offer more predictable timing and cover.

Materials: paint, primer and consumables

The materials cost per square metre depends on the grade of paint chosen. A basic grade is the cheapest option but usually covers less well and may need more coats. A mid-range emulsion gives better coverage and a more even finish. Premium paints with specialised formulations are sold with higher stated coverage, and their cost per square metre is higher. The right choice depends on the surface: a bedroom ceiling and a kitchen wall that gets splashed need different products.

Consumables are a smaller part of the total, but they are easy to forget. Masking tape, roller sleeves, dust sheets, sanding paper, filler and cleaning materials add up, and so does primer on new plaster or bare surfaces. Leaving them out of the budget is the most common reason the materials figure looks low on paper and turns out high in practice.

Walls and ceilings are priced separately

Ceilings cost more per square metre than walls. Working with the arms raised is slower and more tiring, so a painter covers less ground in the same time. This is why the calculator asks for the two areas separately and applies a separate labour rate to each. Enter the total area of the walls in the wall field, and the floor area of the rooms being painted in the ceiling field. Enter zero in the ceiling field if you are not painting the ceilings. Doors, window frames, skirting boards and radiators are not part of a flat wall area, so either add their area to the walls or budget for them separately.

The regional adjustment

The regional factor is a single multiplier applied to labour. A value of 1 represents the national reference level. A value above 1 represents an area where labour is more expensive, such as Dublin and its commuter belt, and a value below 1 represents a lower-cost area. The factor applies to labour only because material prices vary less from one part of the country to another than labour rates do. Choose the factor that matches where the work is done, not the head office of the painting company.

Edge cases

If the ceiling area is zero, the ceiling terms drop out and the result covers walls only. If the wall area is zero, the result covers ceilings only. If the material cost per square metre is zero, for example because you already own the paint, the materials part is zero and the result shows labour alone. If the regional factor is 1, no regional adjustment is made. Negative values have no physical meaning for an area or a rate, so the calculator should be used with zero or positive inputs only.

When to use this calculator and when not to

Use this calculator to check a quote, to plan a budget before the work starts, or to compare doing the job yourself with hiring someone. It is most useful for a whole room or a whole house, where the quantities are large enough for the labour and material rates to matter. Do not treat the result as a fixed price. A firm figure requires someone to see the surfaces, because the condition of the plaster, the existing finish and any damp change the work a great deal. The calculator also does not price specialist work such as lime wash, decorative finishes or spray application over large areas.

Common mistakes

Several errors come up often. The first is to enter the floor area as the wall area, which understates the wall total because it ignores the height of the room. The second is to forget ceilings completely, even though they usually cost more per square metre than walls. The third is to use the price of a paint tin as the materials cost, which leaves out primer, consumables and the extra coats needed when a dark colour goes over a light one. The fourth is to compare quotes that do not describe the preparation. A quote that does not mention filling, sanding and priming may look cheaper only because the work is less complete.

VAT and invoices

This calculator does not add VAT. Whether VAT applies to a painting job, and at which rate, is a question for Revenue (Office of the Revenue Commissioners), so ask each painter whether their quote includes VAT and confirm the position with Revenue before relying on the figure. An invoice is also the only practical record for a warranty claim if the paint peels or the colour is uneven between rooms.

Standards, regulations and consumer rights

The product's technical data sheet states its coverage per litre, drying times and the number of coats it needs, and those figures are a better basis for the calculation than any general average. Works that alter the structure, fire protection or ventilation of a house are governed by the Building Regulations (Second Schedule, Parts A to M), and they fall outside what this calculator covers. Damp and structural defects must be diagnosed before any paint is applied. Before you sign a contract with a painter, read the terms in writing. Before the final payment, walk round the house with a snag list and agree how any defects will be put right.

Preparation decides the result

The final coat is only as good as the surface beneath it. Filling cracks, sanding glossy surfaces and priming bare or patched plaster are the steps that separate a finish that lasts from one that starts to peel within a few years. Ask the painter directly how they prepare the surfaces. If primer is mentioned only when you raise it, treat that as a sign that preparation may be thin, and get the preparation written into the quote.

Frequently asked questions

How much paint do I need to paint a house?

For a three-bedroom semi-detached house with about 160 m² of wall and 100 m² of ceiling, two coats of emulsion need roughly 47 litres, assuming a coverage of 11 m² per litre per coat. Add primer for bare or patched surfaces. Replace the coverage figure with the value on the product's data sheet, because coverage varies between products and sometimes between colours of the same product. Buy a little more than the calculation gives, to allow for waste and touch-ups.

Do ceilings cost more to paint than walls?

Yes. Ceilings take longer per square metre because the work is done with the arms raised, which is slower and more tiring. Most quotes therefore price ceiling work higher per square metre than wall work. The calculator applies a separate labour rate to each surface, so you can enter the rate each painter quotes for walls and for ceilings. If you are only painting walls, enter 0 for the ceiling area.

What is the difference between a self-employed painter and a painting company?

A self-employed painter usually has lower overheads, so the labour rate can be lower, but the work may not be covered by public liability insurance and a VAT invoice may not be issued. A painting company usually carries insurance, can provide a written warranty and works with a crew, so its rate per square metre is higher. For a small job, a reliable self-employed painter with good references is often the most practical option. For larger jobs, a company can offer more predictable timing. Check the insurance and the invoice before you agree.

Is it cheaper to buy the materials myself and pay only for labour?

It depends on the painter. Some painters buy materials at trade prices that a private buyer cannot match, so their material charge may be close to the shop price. The real saving from buying separately is the freedom to choose the exact paint, for example a finish or coverage level the painter does not normally use. Ask the painter whether they will work with materials you supply, and whether they will still guarantee the result when the paint is not theirs. Compare the total cost, not only the materials line.

When does DIY house painting make sense?

DIY painting makes sense for a single room or a small area, where you have the time and the budget is tight. For a first-time painter, a bedroom wall can take most of a weekend once preparation and drying time between coats are included. For a whole house, the manual work adds up to many weekends, and the finish is usually less even at corners, skirting boards and around window frames. Weigh the time you have against the labour cost before deciding.

When should I get a professional to check the walls before using this calculator?

This calculator gives a cost estimate and does not replace a site visit. If the walls show damp stains, bubbling, widespread flaking or mould, the cause must be diagnosed before any painting. Painting over active damp only hides the problem, and it returns. In these cases a builder, a chartered surveyor or another building professional should assess the wall first, and the painter's quote should follow the repair rather than come before it.

Related calculators

View all Paint & Coatings calculators →

By RivoCalc · Reviewed under our editorial methodology · Updated 12 May 2026

This calculator gives an estimate of the cost of painting. Real costs vary with the condition of the surfaces, the paint and grade chosen, the labour rates in your area and the contractor's own terms. Treat the result as a planning figure and obtain written quotes before committing to any work.