Garden Topsoil Calculator: Volume, Bags and Weight
Works out how much topsoil or growing medium a garden bed, lawn or vegetable patch needs, in m³, tonnes and 40 L bags.
A 2 m × 3 m bed filled to a depth of 20 cm needs 1.2 m³ of topsoil, which is 30 bags of 40 L. The weight depends on the material as well as the volume, so the same 1.2 m³ of universal growing medium weighs noticeably less than topsoil, and that difference can change how you plan delivery.
The conversion between cubic metres and 40 L bags is exact, since 1 m³ equals 25 bags, but the weight varies a great deal with the type of material. Topsoil is the heaviest of the three common options, and universal growing medium is noticeably lighter. A car can carry only a limited load per trip, so one cubic metre of topsoil usually means several car journeys or a single tipper lorry delivery. A semi-detached house in a Dublin suburb with a small front garden is usually a bags job, while a new-build estate in Galway with a full back garden to level is a bulk job.
Irish gardens often sit on heavy clay, particularly in parts of the midlands, and new topsoil laid over clay settles and drains slowly unless the base is prepared. Weight matters too on roof terraces and balconies, where the load should be checked before any large delivery.
The depth you choose is the biggest factor in the total. A lawn needs far less than a vegetable plot, so calculate each zone separately and add the totals rather than using one depth for the whole garden. Enter the length and width of the area, the depth of the layer and the type of growing medium. The calculator returns the volume in m³, the number of 40 L bags and the total weight. The result is a planning figure, so check it against the real area on site before ordering.
The result updates automatically.
For irregular beds, use the maximum dimension and scale the width proportionally.
Measure in a straight line, edge to edge.
Lawn: 4–6 in (about 10–15 cm) · Beds and shrubs: 8–12 in (about 20–30 cm) · Vegetable patch: 12–16 in (about 30–40 cm) · Trees: 16–24 in (about 40–60 cm)
This affects the total weight and reference price. Multi-purpose compost is the most common choice for home gardens.
Reference value for this type of substrate. Adjust to match the quote you've received. Enter 0 to ignore the cost.
Topsoil needed
Area: 20.00
Equivalent in 40 L bags
Approx. total weight: 2.60 t
Estimated material cost
For 4.00 at €80.00
- Area
- 20.00 m²
- Topsoil volume
- 4.000 m³
- 40 L bags needed
- 100 bags
- Estimated total weight
- 2.60 t
How it works
Formula
How the calculation works
How to calculate garden topsoil: volume, bags and cost
Working out how much topsoil a garden needs starts with the volume. Underestimating that quantity is the most common and most expensive mistake, especially with bulk topsoil delivered by lorry, because a second delivery costs as much as the first, and often more once a second call-out charge is added.
The formula: simple, with one detail to watch
The volume of topsoil comes from three measurements: length, width and the depth of the layer you are adding. A vegetable patch 5 metres long and 4 metres wide, filled to a depth of 30 centimetres, needs 5 × 4 × 0.30 = 6 m³ of topsoil.
The calculator then converts that volume into bags. One bag holds 40 litres, which is 0.04 m³, so one cubic metre equals 25 bags. The bag count is always rounded up, because you can only order whole bags. The total mass is the volume multiplied by the density of the material, which tells you how many tonnes a tipper lorry or trailer will carry.
The detail people most often miss is settling. Loose topsoil takes up more space than it does after a few weeks of rain and foot traffic. For bulk topsoil, add a margin for settling on top of the calculated volume, and make it larger than the margin for bagged material, which compacts less. The calculator reports the geometric volume only and does not know the ground levels, so on an uneven site work out the average depth before you enter the figures.
Bags or bulk delivery: which works out better?
The choice between bags and bulk delivery depends mainly on the quantity and on how easily the site can be reached. For volumes up to about one cubic metre, 40 L bags are the most practical option. They fit in the boot of a car, you can work at your own pace and any leftover can be stored without trouble. The cost per cubic metre of bagged material is, however, much higher than for bulk.
From around 2 m³, bulk delivery starts to make economic sense. Topsoil from regional nurseries, quarries and other local sources arrives by tipper lorry, and the price per cubic metre is generally far lower than the bagged equivalent, even after delivery charges. A vegetable patch of 20 m² at 30 cm depth, which means 6 m³ in total, shows a large difference between the two routes. Bulk topsoil is available in most regions from garden centres, builders' providers and some groundworks contractors, who sometimes have surplus excavated soil. Its quality varies, so look at it before you accept a load.
Before ordering bulk, check that a tipper lorry can reach the spot and that there is a clear area to tip. A lorry will not easily reach a rear garden behind a narrow side passage, in which case wheelbarrow loads from the front drive may be the only option, and a smaller delivery or bags may be better.
Types of growing medium and what to choose
Three main categories are on the market in Ireland.
Topsoil: taken from natural ground, screened and sometimes enriched with compost. It is the heaviest of the three options and usually the cheapest in bulk. It suits large volumes, vegetable plots and levelling ground. Its pH depends on the geology of the source site, so test it before planting acid-loving or lime-sensitive crops. Soil pH is measured by a method set out in ISO 10390, and a home test kit gives a useful first reading.
Universal growing medium: blended from peat or peat-reduced materials, perlite, compost and slow-release fertiliser. It is noticeably lighter than topsoil, more porous and good at holding moisture. It is the most common choice for flower beds, herbs and outdoor containers, and the most balanced for mixed planting. Compare the product labels for bag volume and recommended use.
Premium or ericaceous mix: with a higher peat content and added micronutrients, suited to acid-loving plants such as rhododendrons, azaleas and blueberries, and to high-yield container growing. For an ordinary garden, the gain over a universal medium rarely justifies the extra cost.
The right depth for each planting
The depth of new material sets the quantity you need. Seeded lawns need only a shallow layer of prepared topsoil over raked ground, enough for common lawn grasses such as perennial ryegrass and fescue. Flower beds with annual and perennial plants need a deeper layer, so that roots have room to grow without reaching the compacted subsoil below. Check the depth recommended by your seed or plant supplier, since the right figure depends on the species.
In a vegetable plot the layer must be deeper again, because fruiting crops such as tomatoes, peppers and courgettes need room for their roots. Root crops such as carrots need the deepest and loosest soil of all. In a terrace garden in Cork or Dublin, the original ground may be builders' rubble or compacted clay, and raised beds with timber or brick edging are often a better choice than digging out. Shrubs and hedging, such as privet or bay, need good quality soil at planting, especially on heavy clay, to avoid rooting problems in the first years.
Calculate each zone separately and add the totals, rather than using a single depth for the whole garden.
Drainage and compaction: what the tables do not show
New topsoil on existing ground will settle over the first months. That is normal. The real problem is poor drainage at the base. Water collects at the boundary between the new material and the old soil, which can leave roots waterlogged and rotting. Gardens on heavy clay are especially prone to this during wet winters.
The simplest fix for clay is to fork or scarify the base before adding the new layer. Alternatively, mix sharp sand, the coarse grit used in building work, into the new topsoil in a modest proportion. Never use sea sand, because its salt harms plants. On slopes or in formal gardens, a geotextile membrane laid over the base keeps the two soils apart while still letting water pass.
Common mistakes
- Ordering exactly the calculated volume, with no allowance for settling.
- Using one depth across the whole garden, when lawns, beds and vegetable plots need different depths.
- Forgetting the access route for a tipper lorry, which can mean a second delivery or a rejected order.
- Ignoring the bag size on the label, since the calculator assumes 40 L bags.
- Treating the mass figure as exact. Actual weight depends on moisture, so a wet load weighs more than a dry one.
When to use this calculator, and when not to
Use it for planting beds, lawns, vegetable plots and small levelling jobs with a regular shape. For an irregular shape, split the area into rectangles and add the volumes. The calculator works out quantities for material you have already chosen. It is not a design tool and does not work out ground levels, falls or drainage.
If the length, width or depth is zero, the volume, bag count and mass are all zero. If the price per cubic metre is zero, the cost is left out of the result.
For projects over 100 m², steep slopes, automated irrigation or ground remodelling involving structural work, professional advice is worth the money in the medium term. A registered landscape architect can check drainage, choose plants suited to the local climate and plan long-term maintenance, which a volume calculator cannot do.
Frequently asked questions
How many 40 L bags of topsoil do I need per square metre?
It depends on the depth. At 20 cm, each square metre needs 0.20 m³ of topsoil, which is 5 bags of 40 L. At 30 cm, the figure rises to 7.5 bags, so you would order 8 for each square metre. For a bed of 2 m × 3 m filled to 20 cm, the calculator gives 1.2 m³, or 30 bags. Enter your actual dimensions to get an exact figure, and add a settling margin if you are using bulk topsoil.
What is the difference between topsoil and universal growing medium?
Topsoil is taken from natural ground, often screened and sometimes enriched with compost. It is the heavier of the two, and usually the cheaper choice when bought in bulk, so it suits large areas such as lawns, levelling and vegetable plots. Universal growing medium is a blended mix containing peat or peat-reduced materials, perlite and slow-release fertiliser. It is noticeably lighter than topsoil, drains well and feeds plants straight away, which makes it better for flower beds and containers. Check the label for the recommended use before you buy.
How much does topsoil cost in Ireland?
Prices vary by supplier, by distance for delivery and by whether you buy in bags or in bulk. Bulk topsoil from a regional supplier or quarry is generally much cheaper per cubic metre than bagged growing medium, and the gap widens as the volume grows. For small volumes, bags from garden centres or builders' providers are more practical, even though the cost per cubic metre is higher. Ask for a quote that includes delivery, then enter the price per cubic metre in the calculator's price field. Enter zero to leave the cost out.
How deep should topsoil be for a new lawn?
For seeded lawns, a shallow layer of prepared topsoil over raked, loosened ground is usually enough for common grasses such as perennial ryegrass and fescue. For turf laid in rolls, a levelled layer of topsoil is sufficient, and the turf supplier can advise on the depth. On very heavy clay or very sandy ground, mix some sharp sand or compost into the base soil before adding the final topsoil. Never use sea sand, because its salt damages plants. Keep the finished level a little below paths and edging so that water runs away from the house.
Is it better to buy topsoil in bulk or in bags?
For volumes up to about 1 m³, bags are more practical. They fit in a car, can be stored without trouble and need no special access. From roughly 1.5 to 2 m³, bulk delivery usually works out cheaper per cubic metre, and the difference is most noticeable for vegetable plots and larger projects. The main requirement for bulk is space: a tipper lorry must be able to reach the spot and there must be a clear area to tip. If the lorry cannot reach the garden, plan for wheelbarrow loads or a smaller delivery.
When should I hire a landscape architect?
For simple jobs, such as filling a flower bed, making a vegetable patch or sowing a lawn, this calculator and some reading are usually enough. Professional advice is worth considering when a project involves shaping ground with significant slopes, automated irrigation, integrated paving, structural retaining walls or an area above 100 m². A registered landscape architect can avoid drainage errors, pick plants suited to the local climate and plan maintenance over the long term. Check the professional's registration and ask for references before you commit.
View all Garden, Outdoor & Water calculators →
By RivoCalc · Reviewed under our editorial methodology · Updated 11 June 2026
Results are estimates for planning purposes only. Actual volumes depend on how the ground settles, how far the soil compacts and any waste on site, and the quantity a supplier delivers can differ from the calculated figure. Check the final order with your supplier before you buy. Cost figures are only as accurate as the price you enter.
