Skip to main content

Flooring Cost Calculator per m²

Estimates the cost of solid timber, engineered, laminate or parquet flooring per m², including material, installation and waste.

For an 18 m² lounge laid with solid timber boards on a diagonal pattern, order 20.7 m² of material: 18 × 1.15 = 20.7 m², using the calculator's default diagonal allowance of 15%. The extra area covers the offcuts at the walls, where diagonal boards must be cut at an angle. With a straight layout, the default allowance is 10%, so the same room needs 19.8 m² (18 × 1.10).

Flooring is one of the projects where the price on the label is only the starting point. The final cost depends on the waste from cutting, the installation labour, and the materials that rarely appear in a supplier's quote, such as underlay, adhesive and threshold strips. This calculator brings these variables together for the four main types of flooring: solid timber, engineered timber, laminate and mosaic parquet. Each type needs a different installation method, and that changes the labour part of the budget.

Start by measuring the length and width of each room, multiplying them to get the area, and adding the rooms together. Choose the flooring type and the laying pattern, and the calculator applies the waste allowance to the area. Enter the installation cost per m² from your installer's quote to get a total. Treat the figure as a planning number. A calculator cannot see the condition of the subfloor, the shape of the room or how hard the boards are to get into the house, and those factors move the final quote.

A common surprise is preparation. Many older New Zealand houses have a suspended timber floor rather than a concrete slab, so the joists, subfloor and ventilation need checking before any new floor goes down. Ask installers to price this work separately, because quotes often leave it out. A concrete slab needs a different check, mainly for levelness and moisture.

The result updates automatically.

Net area of the room, excluding furniture

Reference value for this type and quality. Adjust to match the quote you've received.

Leave blank to calculate materials only

Estimated total cost

$1,324

materials $924 + installation $400

Area with waste (10%)
22.0 m²
Material cost
$924
Installation cost
$400
Original area
20.0 m²

Turn this calculation into a quote for your client

We're building a tool for professionals. Be among the first to try it.

Share

How it works

1

Enter the floor area in square metres.

2

Select the flooring type: solid timber, engineered timber, laminate or mosaic parquet.

3

Choose the quality level. The reference price per m² fills in automatically.

Formula

C = A × (1 + D/100) × p + A × i
C — Estimated total cost, in New Zealand dollars (NZD)
A — Floor area to be covered (m²)
D — Waste allowance (%), set by the laying pattern: straight or diagonal
p — Material price, in New Zealand dollars per m²
i — Installation cost, in New Zealand dollars per m² (optional)

How the calculation works

How to work out the cost of timber flooring in New Zealand

Budgeting for a new floor looks simple: multiply the floor area by the price per square metre and the job is done. In practice, three factors are often missed, and together they can push the final cost well above the first estimate: waste from cutting, installation labour, and the supporting materials. This calculator handles the first two. Underlay, adhesive, moisture barrier and threshold strips are left to the person preparing the budget, because they vary widely by product and by room.

Waste is unavoidable. At the end of each row, boards must be cut to fit against the wall, and the offcut often cannot be reused. The calculator applies a waste allowance that depends on the laying pattern. Its default is 10% for a straight layout, with boards running parallel to the main walls, and 15% for a diagonal layout, which is often chosen to make narrow rooms or irregular plans feel larger. A diagonal layout produces more waste because every cut at the end of a row is angled. These are planning defaults set in the calculator, not figures taken from a published standard. Your installer may apply a different allowance for a complex room, so confirm it before ordering. In a 25 m² room, the defaults add 2.5 m² of material for a straight layout and 3.75 m² for a diagonal one.

Flooring types available in New Zealand

New Zealand homes use four main types of timber and timber-look flooring, and their costs differ widely.

Solid timber: full-thickness boards, commonly oak, rimu, Douglas fir or imported hardwoods. Because the wood runs all the way through, the boards can be sanded and re-finished several times, which gives solid timber the longest working life of the four types. It is nailed or glued to a prepared subfloor, which calls for an experienced installer and a level base. Price varies with species and finish. Exotic species and hand-finished boards cost considerably more than common local timbers.

Engineered timber: a thin layer of real timber bonded to a plywood or HDF core. The core makes the board more stable when humidity and temperature change, which suits homes with damp winters or underfloor heating. It can be glued down or laid as a floating floor. Entry-level ranges sit close to good-quality laminate, while high-end ranges approach solid timber in price.

Laminate: not timber. A printed decorative layer sits over an HDF core, with a hard wear surface on top. Laminate is a common choice in the lower price ranges, sold through large DIY retailers and specialist flooring suppliers, and it is the simplest to install as a floating floor. It cannot be sanded, so surface damage has to be repaired or the affected boards replaced. Look for the wear rating, AC4 or AC5 under EN 13329, which indicates the level of traffic the product is designed for.

Mosaic parquet: small solid timber strips laid in square panels. It is more often found in older character homes in the main cities. Installation is more labour-intensive than for the other types, because each strip is fixed or glued individually, and sanding and finishing are usually part of the job. The material cost is comparable to mid-range solid timber and varies with species and strip quality.

Installation: factors that affect labour cost

Installation accounts for a large share of the total, especially for higher-quality floors. Three levels of complexity define the labour cost.

Basic installation (floating laminate): boards click together over an underlay, with no adhesive. This is usually the least expensive labour because it needs no specialist equipment and no curing time.

Intermediate installation (floating or glued engineered timber): a floating floor needs a level subfloor and a suitable underlay. A glued floor requires a suitable flooring adhesive and professional equipment, which raises the labour cost noticeably compared with a floating floor.

Specialist installation (solid timber nailed or glued, and mosaic parquet): this needs an experienced installer, a flat base, moisture control and, for parquet, sanding and final finishing. It is consistently the most expensive labour level in this category.

Labour rates also vary by region and by demand. Installers in Auckland and Wellington often charge more during busy periods, while rural regions may have lower rates but fewer installers and longer waiting times. Get at least three written quotes and check whether each one includes subfloor preparation. Once you have the installer's labour figure, enter it per square metre in the installation field. The calculator adds it to the cost of the material, including waste.

How the formula works

The formula is C = A × (1 + D/100) × p + A × i. The floor area A is multiplied by one plus the waste percentage divided by 100, which gives the total area of material to buy. That figure is multiplied by the material price per square metre, p. The installation term, A × i, is added separately, because installers usually quote per square metre of floor laid rather than per square metre of material bought. Adding the two terms gives the estimated total, C. Since the installation rate is optional, leaving it at zero shows the material cost only.

Preparing the base: the hidden cost

The most expensive mistake in a flooring job is installing over an unprepared base. Uneven subfloors cause visible dips, squeaks and gaps at the joints, and on a suspended timber floor, sagging joists or damp timber can cause the same problems. Check the flatness tolerance in the manufacturer's technical data sheet, and ask the installer how they will level the floor. Levelling compound or subfloor repair is often left out of early budgets, but it is a real cost and should be requested explicitly.

Moisture is the other common issue. Glued timber may not bond reliably to a damp concrete slab. The manufacturer's data sheet sets the acceptable moisture level for the product and the test method to use. A moisture meter reading is the usual check. If the reading is high, the slab needs more time to dry, or a moisture barrier primer may be required. Under a suspended floor, check the subfloor for ventilation and dampness, because trapped moisture can make boards cup and swell. Renovations of older houses are a common place for these problems, so do the test before ordering the material.

Common mistakes to avoid

Buying without a waste allowance. Buying exactly the room area is a common error. With the calculator's default 10% allowance for a straight layout, a 20 m² room needs 22 m² of material. If you buy 20 m² and waste boards at one end, you may run short on the last row.

Not checking the batch. Boards from different production runs can differ in colour and texture, even when the product name is the same. Buy from one batch, and order a little more than the calculated need so spare boards are available for future repairs.

Installing without acclimatisation. Solid and engineered timber should be stored in the room where it will be laid, for the period stated in the manufacturer's installation instructions. Timber expands and contracts with the temperature and humidity of the space. Installing it straight from a cold delivery can cause gaps or cupping. Laminate with an HDF core is more tolerant, but its manufacturer's instructions should still be followed, and they may also specify an acclimatisation step.

Ignoring wet areas. Bathrooms need a floor covering rated for constant water exposure, and timber, laminate and mosaic parquet are generally not designed for that. Check the manufacturer's data sheet before fitting any of them in a wet room, because the stated limits take precedence over general advice. Ceramic tile and vinyl are commonly chosen for wet areas. In kitchens, engineered timber or laminate can work with extra care around the sink. The New Zealand Building Code, published by the Ministry of Business, Innovation and Employment (MBIE), includes clause E3 (Internal moisture), which deals with moisture within buildings. Ask your local council if you are unsure how it applies to your work.

Edge cases

A zero floor area gives a zero cost, which is correct but not useful, so enter the full area of each room. A zero installation rate is valid when you do the work yourself or when the labour is already included in your material price, and the result then shows the material and waste cost only. A zero material price gives the installation cost only, which helps when the client has supplied the flooring. A negative value has no physical meaning and should be corrected before the result is read.

When to use this calculator, and when not to

Use this calculator to plan a budget before getting quotes, to compare flooring types, or to check how much material to order. It is not a substitute for an installer's quote, because it cannot see site access, the condition of the subfloor, stairs, thresholds or any heritage constraints on the property. Do not use it for structural work or for floors that must carry loads beyond normal domestic use. In a heritage-listed home, the flooring may be governed by specific requirements, so check with your local council before making changes.

Standards and local requirements

The European standards that define the main product types are EN 13226 for solid parquet elements with interlocking joints, EN 13489 for multilayer parquet elements and EN 13329 for laminate floor coverings. Product data sheets often refer to these standards and are a good place to check moisture, load and wear ratings. Local authorities may have additional requirements, particularly for fire performance in commercial buildings or for work that affects structural elements.

Frequently asked questions

How much does timber flooring cost per m² in New Zealand?

Cost depends heavily on the type. Laminate sits at the lower end of the market and is widely available through large DIY retailers and specialist flooring suppliers. Engineered timber occupies the middle range, with prices that rise with the thickness of the timber wear layer and the species. Solid timber and mosaic parquet sit at the top, and exotic species or hand-finished boards cost considerably more than common local timbers. Installation can be a large share of the total as well, so ask for separate quotes for material and labour, and enter the installation cost per m² in the calculator to see the total. Prices change, so use current supplier quotes rather than published figures.

What is the difference between solid and engineered timber flooring?

Solid timber is full-thickness wood throughout. Its boards can be sanded and re-finished several times, which gives it the longest working life of the flooring types covered here. Engineered timber has a thin layer of real timber over a plywood or HDF core. The core makes it more stable when humidity and temperature change, which matters in homes with damp winters or underfloor heating, where solid boards are more likely to shrink, swell or gap. Engineered timber also suits glued or floating installation, while solid timber is usually nailed or glued to a prepared subfloor. Choose solid timber when refinishing is a priority, and engineered timber when stability and simpler installation matter more.

Should I lay timber flooring straight or on a diagonal?

A straight layout, with boards running parallel to the main walls, is the simplest and produces the least waste. A diagonal layout creates the feeling of a larger space and suits narrow rooms or irregular plans, but it produces more waste because every cut at the end of a row is angled. With the calculator's default allowances, an 18 m² room needs 19.8 m² of material on a straight layout and 20.7 m² on a diagonal one. Diagonal laying also takes more time, so installation labour is usually higher. Ask the installer which layout they recommend for the room shape, and check how the boards run in relation to the light from the main windows before you decide.

Can I put timber or laminate flooring in a bathroom or kitchen?

Bathrooms need a floor covering rated for constant water exposure, and timber, laminate and mosaic parquet are generally not designed for that. Check the manufacturer's data sheet before fitting any of them in a wet room, because steam and water splashes can damage the joints even when the surface is sealed. Ceramic tile and vinyl are commonly chosen for wet areas. Kitchens are more manageable: engineered timber or a laminate with a water-resistant core can work when spills are wiped up promptly, but the area around the sink and dishwasher needs extra care, and any leak should be fixed at once. The New Zealand Building Code, clause E3 (Internal moisture), deals with moisture within buildings, so check it, and ask an installer which products suit a kitchen before you buy.

Do I need to order extra flooring for waste?

Yes. Buying exactly the room area is a common ordering error, because boards are cut at the walls and offcuts often cannot be reused. Add the waste allowance that the calculator applies for your chosen laying pattern, then round up to whole packs. Buy all the material in one batch, since boards from different production runs can differ in colour, and keep a few spare boards for repairs. If the room has many alcoves, cut-outs or a complex shape, the installer may recommend a larger allowance. Check the waste figure with them before placing the order.

When should I hire a professional installer?

Floating laminate can be laid by an experienced home renovator who follows the manufacturer's installation guide. Solid timber, glued engineered timber and mosaic parquet need a skilled installer, because base preparation, adhesive choice and moisture control all require experience, and mistakes are costly to correct. Mosaic parquet and unusual species with complex layouts are best left to a specialist. On suspended timber floors, a builder may need to check joists or the subfloor before new boards go down. If the work affects structural elements or a heritage-listed home, check with your local council before starting, because the approach may need to follow specific requirements.

View all Paint & Coatings calculators →

By RivoCalc · Reviewed under our editorial methodology · Updated 6 June 2026

This calculator gives an estimate only. Actual costs depend on the product you choose, the condition of the subfloor, labour rates in your area and the installer's quote. Treat the result as a planning figure, and get itemised quotes before you commit to a budget.