Full House Painting Cost Calculator
Estimate the total cost of painting a New Zealand home, split into materials and labour for walls and ceilings, with a regional adjustment.
Take a house with 80 m² of wall to paint and 55 m² of ceiling. Enter those two areas and the calculator splits the total into materials and labour, so you can see which part drives the cost. Most of the total usually comes from labour and from the quality of preparation, not from the paint itself. Many owners work out how many litres of paint they need, then forget the primer, the masking tape, the dust sheets and the sanding time, and underestimate how long the job takes.
Painting a whole house is one of the jobs that most often surprises people on cost. The reason is that the total has two separate parts: materials (paint, primer and consumables) and labour. Each part moves for different reasons, so a single rate per square metre rarely tells the full story. This calculator keeps them apart, so you can see where the money goes and change one input without disturbing the other.
Labour usually carries the larger share of a professional job. Ceilings usually take longer than walls because the work is done with the arms raised, so a painter spends noticeably more time per square metre on a ceiling. Labour rates also differ from one area to another, which is why the calculator has a regional multiplier that you set from the quotes you collect locally. The multiplier applies only to labour, because materials are entered as separate inputs and are not scaled by region.
Materials are the other part of the bill. The grade of paint matters: a basic range may suit low-traffic rooms, while mid-range and premium products usually offer better coverage and durability, so fewer coats may be needed. Treat the quality setting as a way of comparing scenarios, not as a fixed price. Primer, filler, masking tape, sheeting and abrasives are small items on their own, but they are easy to forget and add up across a whole house.
The result is an estimate, not a quote. A written quote from a painter requires a site visit to check the condition of the surfaces, how much preparation is needed and whether the work includes any repairs. Use the figure to judge whether the quotes you receive are reasonable and to plan the budget before the work starts.
The result updates automatically.
Total of all the walls. Enter 0 if you're not painting walls.
The same as the floor area of the rooms. Enter 0 if you're not painting ceilings.
Reference rates for the New Zealand market: materials and labour per m², for walls and ceilings, before regional adjustment. Adjust them to the quotes you have received.
Estimated total cost
90 painted
- Materials — walls
- $420
- Materials — ceilings
- $218
- Labour — walls
- $270
- Labour — ceilings
- $188
- Total area painted
- 90 m²
How it works
Formula
How the calculation works
How to estimate the cost of painting a house in New Zealand
Painting a house is one of the maintenance jobs most often underbudgeted. Owners buy the paint, get a quote for the labour and are surprised by the final invoice. The cost has two independent components, materials and labour, and each varies a lot with the choices made. This calculator separates the two and applies the formula to give a realistic range for a New Zealand home. The result is built from four inputs: the wall area, the ceiling area, the type of labour and the region.
Labour: the variable that weighs most on the budget
Labour is normally the larger part of a professional interior repaint. Work done by an individual painter is usually the lowest-cost labour option, but it may come without a tax invoice, without public liability insurance and without a written guarantee. A small painting business that is registered for GST, carries insurance and gives a written guarantee of workmanship costs more per square metre, because those costs are built into its rate. A larger company with a permanent crew sits at the top of the range, and that is reflected in the rate charged to the client.
Ceilings usually cost more per square metre than walls. Working with the arms raised is slower and more physically demanding, so a painter spends noticeably more time on each square metre of ceiling. The calculator therefore takes separate labour rates for walls and ceilings, rather than treating both surfaces as the same job.
Labour rates also differ from one area to another, and the regional multiplier is there so that you can reflect your own area. Rather than relying on a national average, set the multiplier from the quotes you collect locally. A value above 1 suits an area where quotes come in above the national reference rate, and a value below 1 suits an area where they come in below it. The multiplier applies to labour only. Material costs are separate inputs and are not scaled by region, so a higher labour rate in one area does not change the price of the paint.
Materials: what you actually pay for
For a typical interior repaint, the job usually means two coats of water-based acrylic paint over a coat of primer on bare or patched surfaces. The material cost per square metre depends on the grade chosen. A basic grade is the cheapest option, but it often needs more coats to cover an existing colour evenly. A mid-range acrylic gives better coverage and a more consistent finish. Premium paints, with specialist formulations and higher stated coverage, cost more per square metre but can reduce the number of coats required.
Consumables are a smaller but real part of the budget. Masking tape, roller sleeves, trays, dust sheets, sandpaper and filler cost little on their own, yet they are easy to leave out of a budget. Forgetting them usually means an extra trip to the shop in the middle of the job.
Older homes may contain lead-based paint, particularly on window joinery and older timber. Test before sanding or scraping, and follow WorkSafe New Zealand guidance on working with lead. Disturbing old paint without precautions creates dust that is a health hazard, and that risk is not included in any cost figure.
DIY or a professional?
Doing the work yourself removes the labour cost completely, but time becomes the hidden cost. A single room with a modest wall area, prepared and painted with two coats, takes an inexperienced person a large part of a weekend once preparation and drying time are included. A whole house is usually a multi-week job for one person working around other commitments.
DIY suits small jobs, such as one bedroom, a hallway or a bathroom, where time is available and the budget is tight. For a full repaint of a three-bedroom home, hiring a professional is often the more sensible choice even after paying for labour. The finish also tends to be more even. An experienced painter cuts in cleanly around edges, prepares surfaces properly and works through the job faster, which reduces the risk of visible lap marks and patchy coverage.
How to choose a painter in New Zealand
The market is fragmented. It includes sole traders, often called tradies, some of whom do not issue tax invoices; small businesses registered for GST; and larger painting companies. For any job of meaningful size, a few practical checks help.
Get at least two or three written quotes. Prices vary considerably, and the cheapest quote is rarely the fastest or the most careful. A clear quote states the number of coats, the product and grade, the area being charged for, and whether surface preparation such as sanding, filling and priming is included or charged separately.
Ask whether quotes include GST, and ask for a tax invoice. GST is administered by Inland Revenue (IRD), which sets out the information a GST-registered business must show on a tax invoice, including the GST charged. Quotes from a painter who is not registered for GST will not show it at all. A tax invoice is the practical record you need if you have to pursue a complaint about poor workmanship or inconsistent colour between rooms. The Consumer Guarantees Act 1993 implies that services are carried out with reasonable care and skill, but a written description of the work protects both sides if there is a dispute.
Ask directly how the painter prepares surfaces. The final finish depends on the preparation, which includes sanding, filling cracks and priming bare or patched areas. If primer is mentioned only after you ask about it, treat that as a warning sign and ask for the scope in writing.
When this calculator is not enough
The calculator is built for interior walls and ceilings. Exterior work on weatherboard or other cladding needs different inputs, because scraping, repairs, access equipment and exterior coatings change the cost substantially.
Painting over active damp only hides the problem. Stains from water, bubbling or flaking paint across a wall, and mould all usually mean the cause has to be found and fixed before any painter starts. If you see these signs, a licensed building practitioner or a building inspector can assess the cause, and a painter should visit the site before you agree a price.
Common mistakes
- Using the floor area for the walls. Wall area is the total of every wall's height multiplied by its length. Ceiling area is roughly the floor area of the rooms.
- Entering square feet in the square metre field. A figure in square feet is about 10.8 times larger than the same area in square metres, so the result would be far too high. Enter metric values.
- Leaving out the ceilings. If you are not painting them, the ceiling area should be set to 0 rather than left blank.
- Using one rate for walls and ceilings. Ceiling work is slower, so the two should be treated separately.
- Forgetting primer. New plaster, new filler and bare patches usually need primer before the topcoat.
- Assuming two coats are always enough. A strong existing colour, or a large change of shade, often needs more.
- Treating the output as a quote. The figure is a planning estimate only.
Edge cases in the calculation
If the ceiling area is 0, the ceiling terms drop out and the result covers walls only. If both areas are 0, the result is 0, because there is no surface to paint. The regional multiplier of 1 represents the national reference rate, and values above or below 1 scale the labour cost only.
How to use the result
Compare the figure with each quote on the same basis: the same wall and ceiling areas, the same number of coats, the same preparation and the same treatment of GST. A quote that is much higher than the estimate is not necessarily poor value, because it may include preparation, repairs or a longer guarantee. A quote that is much lower should prompt questions about what has been left out.
Use the estimate as a planning tool. Set aside a contingency for unexpected repairs that are found once the old paint is removed or the surfaces are opened up, and revisit the calculation if the scope of the job changes.
Frequently asked questions
How do I estimate the cost of painting a house in New Zealand?
Start with the wall area and the ceiling area of the rooms you are painting, measured in square metres. The total depends on the grade of materials, whether an individual painter or a company does the work, and the region. Enter the areas, choose the options that match your job, and compare the result with the quotes you receive. Treat the figure as a planning estimate, not a fixed price.
Do ceilings cost more to paint than walls?
Usually, yes. Painting ceilings means working with the arms raised, which is slower and more physically demanding, so a painter spends more time per square metre than on a wall. The calculator therefore uses separate labour rates for walls and ceilings. If you are not painting the ceilings, enter 0 for the ceiling area and the result will cover walls only.
What is the difference between an individual painter and a painting company?
An individual painter is usually the lowest-cost labour option, but may not issue a tax invoice, carry public liability insurance or offer a written guarantee. A small business registered for GST, with insurance and a written guarantee of workmanship, costs more per square metre. A larger company with a permanent crew sits at the top of the range. For small jobs, a reputable individual painter with good references can be the most sensible choice. For large projects, a company tends to offer more predictable timing and quality control.
Is it cheaper to buy the materials myself and hire only the labour?
It can be, but it depends on the painter. Some painters buy materials at trade terms that a private buyer cannot get. If the painter uses the same paint you would buy, the material charge is usually close to the retail price. The real advantage of buying separately is choosing the exact product, such as a specific finish or a low-VOC paint, which the painter may not normally stock. Check with the painter before you buy, so that the quantity and product match what they plan to apply.
When does DIY painting make sense?
DIY makes sense for small areas such as a single bedroom, a bathroom or a hallway, where time is available and the budget is tight. For a whole house with 80 m² or more of wall, the time needed, typically many weekends for one person, rarely saves enough to justify the effort. Finish quality on corners, skirting boards and around openings is usually lower than a professional's. Test old paint for lead before sanding, whatever you decide.
When should I speak to a professional before painting?
This calculator estimates cost and does not replace a site visit. If you see damp patches, bubbling or flaking paint across a wall, or mould, find and fix the cause before painting, because paint applied over active moisture only delays the problem. In these cases a licensed building practitioner or a building inspector may be needed. Ask a painter to visit and assess the surfaces before you commit to a price.
Related calculators
Wall Paint Calculator: How Many Litres Do You Need?
Calculate how many litres of paint a room needs, with a 5% allowance for touch-ups and an optional materials cost estimate.
Ceiling Paint Calculator (Litres and Coats)
Calculate the litres of ceiling paint you need from room size, coverage and number of coats. The result includes a 5% allowance for spatter.
Exterior Paint Calculator (Litres and Primer)
Calculates the litres of exterior paint and primer needed for a wall, using coverage rates for smooth, textured and porous surfaces, with a 10% margin.
View all Paint & Coatings calculators →
By RivoCalc · Reviewed under our editorial methodology · Updated 12 May 2026
This calculator gives an estimate only, not a quote. Real costs vary with the condition of the surfaces, the products chosen, access, the rates charged by the painter and your region. Confirm the figure with a written quote after a site visit.
