Garden Topsoil Calculator: m³, Tonnes and Bags
Calculates garden topsoil or potting mix in m³ and tonnes, with 40 L bag equivalents and an estimated cost.
A raised bed measuring 2 m × 3 m and filled to a depth of 20 cm needs 1.2 m³ of topsoil, which is 30 bags of 40 L. At the calculator's planning density for topsoil (1.1 t/m³), that volume weighs 1.32 t. The same volume of universal potting mix weighs 0.78 t at its planning density (0.65 t/m³), a difference of 540 kg that changes how you plan delivery, site access and the number of trips.
The conversion between cubic metres and 40 L bags is exact (1 m³ = 25 bags), but the weight depends heavily on the material. Topsoil is the heaviest of the common options, universal potting mix is noticeably lighter and peat-based mixes are lighter again. A standard hatchback cannot carry a cubic metre of topsoil in one trip, so a full cubic metre usually means a bulk delivery by tip truck or several trips with a trailer.
Enter the length and width of the area, the depth of the layer and the type of material. The calculator returns the volume in m³, the number of 40 L bags rounded up to whole bags and the total weight. If you enter a price per m³ from your supplier, it also estimates the cost. The result is a planning figure, because ground settlement and the sizes of available deliveries will affect what you actually order.
Consider a backyard in Hamilton where a family wants three raised vegetable beds. Each bed needs its own calculation, and the volumes are then added together before ordering. Bulk topsoil is usually sold by the cubic metre or by the tonne, so confirm the unit before comparing quotes. Garden centres and landscape supply yards sell bagged mixes, while bulk topsoil arrives by truck, and the right choice depends mostly on volume and access to the site.
The result updates automatically.
For irregular beds, use the maximum dimension and scale the width proportionally.
Measure in a straight line, edge to edge.
Lawn: 4–6 in (about 10–15 cm) · Beds and shrubs: 8–12 in (about 20–30 cm) · Vegetable patch: 12–16 in (about 30–40 cm) · Trees: 16–24 in (about 40–60 cm)
This affects the total weight and reference price. Multi-purpose compost is the most common choice for home gardens.
Reference value for this type of substrate. Adjust to match the quote you've received. Enter 0 to ignore the cost.
Topsoil needed
Area: 20.00
Equivalent in 40 L bags
Approx. total weight: 2.60 t
Estimated material cost
For 4.00 at $80.00
- Area
- 20.00 m²
- Topsoil volume
- 4.000 m³
- 40 L bags needed
- 100 bags
- Estimated total weight
- 2.60 t
How it works
Formula
How the calculation works
How to work out garden topsoil: volume, bags and cost
Preparing a garden bed starts with knowing how much material to order. The most common mistake, and the most expensive, is underestimating. When topsoil arrives in bulk by truck, a second delivery costs as much as the first or more, and it may arrive weeks later when the site is already dug up.
The formula: simple, with one detail that matters
The volume comes from three measurements: length, width and the depth of the layer you are adding. A vegetable garden 5 metres long and 4 metres wide, filled to 30 centimetres, needs 5 × 4 × 0.30 = 6 m³.
The detail people forget is settling. Loose topsoil occupies more space than the same soil after a few weeks of rain and foot traffic. Order a margin above the calculated volume, and a larger margin for bulk topsoil than for bagged mix, which is already compacted. Agree the final quantity with your supplier in whole loads, since bulk deliveries are usually measured in full or part loads.
The bag count follows the same logic. One cubic metre equals 25 bags of 40 L, so the calculator rounds the bag count up to a whole bag. If you work out several beds separately, add their volumes first and round once at the end. Adding up rounded bag counts for each bed can order more bags than you need.
Bags or bulk: which is cheaper?
The choice between bags and bulk delivery depends mostly on volume and site access. For small volumes, up to about one cubic metre, bags are the practical option. They fit in a family car, can be used at your own pace and any leftovers can be stored without trouble. The cost per cubic metre in bags is, however, considerably higher than bulk.
Bulk delivery becomes economical as the volume grows. For a 20 square metre vegetable garden at 30 cm deep, the total is 6 m³, and the difference between bagged and bulk can be large, even after adding delivery charges. Bulk topsoil is available from landscape supply yards, plant nurseries and quarries, and some local councils occasionally have fill available. Ask about the origin of the soil before you buy, because it varies from one supplier to another.
Check access before ordering. A tip truck needs a clear route to the site and a safe place to tip the load. Narrow side gates, steep driveways and overhead wires can add cost or stop a delivery altogether, and a load that is tipped on the wrong part of the section is hard to move later.
Types of material and when to use each
Three categories are common in New Zealand garden supply.
Topsoil: collected from natural soils, screened and sometimes enriched with compost. It is the heaviest of the three types and the cheapest option in bulk. It suits filling large areas, preparing vegetable gardens and levelling ground. Its quality depends on its source, so ask the supplier what it is made from. Soil pH also varies widely between regions and sources, so test it before planting crops that need a particular range.
Universal potting mix: a formulated blend, usually containing peat or a peat substitute, perlite, compost and slow-release fertiliser. It is lighter than topsoil, porous and good at holding moisture. It suits garden beds, containers and flower borders. Because the blend varies between brands and ranges, read the label for its composition and check whether it is peat-free if that matters to you.
Enriched peat or premium mixes: a higher peat content with added micronutrients, suited to acid-loving plants such as rhododendrons, azaleas and blueberries, and to high-performance container growing. For an ordinary garden, the gain over universal mix rarely justifies the extra cost.
Depth by planting type
Depth decides the order quantity. For sown lawn, 10 to 15 cm of prepared topsoil over loosened ground is typical for common grasses such as fescue and ryegrass. For annual and perennial flower beds, 20 to 25 cm gives roots room to grow without reaching compacted subsoil.
Vegetable gardens need at least 30 cm for crops such as tomatoes, capsicums and zucchini. Root crops such as carrots need 40 to 50 cm of loose soil. Hedges and shrubs benefit from 40 to 50 cm of good soil at planting, which reduces root problems in the first years, particularly on heavy clay.
On older urban sections, the base soil may be fill, building rubble or compacted ground. In that case, raised beds with timber edging are often more practical than digging out the existing ground. Use timber with a treatment level rated for ground contact. Measure the internal dimensions and depth of each bed, because those are the figures the volume depends on.
Drainage and compaction: what the tables do not show
New topsoil settles over the first months, which is normal. The real problem appears when the base ground does not drain. Water collects at the boundary between new soil and old soil, causing waterlogging and root rot.
The simplest fixes are to loosen the base with a fork or scarifier before adding the new layer, which matters most on clay, or to mix coarse river sand into the new topsoil. Use river sand, not beach sand, which carries salt. On sloping or formal areas, a geotextile membrane can keep the two soils apart without blocking drainage.
Check the fall of the ground as well. Garden soil and mulch should stay well below the bottom edge of a house's cladding. Raising the ground against weatherboards is a common cause of moisture damage, and clause E2 (External moisture) of the New Zealand Building Code sets the requirements for keeping water out of the external walls.
Common mistakes
- Measuring the bed at its surface and not at the depth you want after settling.
- Adding up rounded bag counts for several beds instead of calculating the total volume first.
- Ordering by weight but quoting in cubic metres, or the reverse. Use the density figure to convert between the two.
- Entering a price per tonne in the price per m³ field.
- Treating an irregular bed as a single rectangle. Split it into rectangles, calculate each one and add the results.
When not to use this calculator
The calculator sizes materials, it does not design the garden. It does not account for slope, drainage design, irrigation, retaining structures or the soil depth that large trees need. For large areas, steep ground, automatic irrigation or work that involves building structures, a registered landscape architect is usually the more economical path over the long term.
Retaining walls and some raised structures may need a building consent under the Building Act 2004, so check with your local council before you build. Earthworks and the disposal of soil are controlled through district and regional plans made under the Resource Management Act 1991, so the rules vary by council and are worth checking before a large delivery arrives.
Soil testing before planting
Soil pH affects how plants take up nutrients. A soil test before planting edible crops is worthwhile on any new ground filled with mixed material. The method for measuring soil pH is set out in ISO 10390, the international standard for soil quality, so a test kit or laboratory result that follows it can be compared with other results.
Summary
For a reliable order, measure each area at the depth you want after settling, add a margin, calculate the total volume and then round once. Choose between bags and bulk according to volume and site access, and check the local rules before building anything that holds back soil.
Frequently asked questions
How many 40 L bags of topsoil do I need per square metre?
It depends on the depth. At 20 cm, each square metre needs 0.20 m³, which is 5 bags of 40 L. At 30 cm, it needs 0.30 m³, or 7.5 bags, so you would round up to 8 bags per square metre if you buy bags. For a whole bed, enter the length, width and depth into the calculator rather than multiplying by hand, because it rounds the total to whole bags only once. Add a margin for settling if you are ordering loose topsoil.
What is the difference between topsoil and universal potting mix?
Topsoil is collected from natural soils, usually screened, and sold mostly in bulk. It is heavier than universal potting mix and it is cheaper for large areas such as lawns, levelling and vegetable plots. Universal potting mix is a formulated blend of peat or a peat substitute, perlite, compost and slow-release fertiliser. It is lighter than topsoil, drains well and gives plants nutrients from the start. It suits garden beds, containers and flower borders. For large volumes, bulk topsoil is usually the more economical choice. Check the product label for its composition.
How much does garden topsoil cost in New Zealand?
Prices vary by region, supplier and whether you buy bagged or bulk material. Bulk topsoil is usually cheaper per cubic metre than bagged mix, and the gap widens as the volume grows. Delivery charges depend on distance and the size of the load, so they matter more for small orders. Ask local landscape supply yards for a quote, check whether it includes GST, and enter the price per cubic metre into the calculator to get an estimated cost. Prices change over time, so treat any figure as a planning estimate and confirm it before you order.
How deep should topsoil be for a lawn?
For sown lawn seed, a layer of about 10 to 15 cm of prepared topsoil over loosened ground is typical for common grasses such as fescue and ryegrass. For rolled turf, a levelled layer of around 10 cm is commonly used. On heavy clay or very sandy ground, mix compost or coarse river sand into the base soil before adding the final topsoil, and follow the sowing or turf supplier's guidance for the exact grass species.
Is it worth buying bulk topsoil or bagged mix?
For volumes up to about one cubic metre, bags are more practical. They fit in a family car, store easily and can be used at your own pace. Above roughly 1.5 to 2 cubic metres, bulk delivery often becomes the cheaper option per cubic metre, even after delivery charges, but compare quotes because local prices differ. The main requirement for bulk is access: the truck needs a clear route and a safe place to tip the load, so check driveway width, overhead wires and whether the ground can take a heavy vehicle before ordering.
When should I hire a landscape architect?
For simple jobs, such as filling a bed, building a vegetable garden or sowing a lawn, this calculator and some research are usually enough. Consider a landscape architect when a project involves shaping ground on slopes, automatic irrigation, integrated paving or large areas. A professional can prevent drainage errors, choose plants suited to your climate and plan for long-term maintenance. Retaining walls and some structures may also need a building consent under the Building Act 2004, so check with your council before starting.
View all Garden, Outdoor & Water calculators →
By RivoCalc · Reviewed under our editorial methodology · Updated 11 June 2026
The results are planning estimates. Actual volumes depend on how the ground settles, how level the bed is and the moisture content of the material, and prices vary by supplier and region. Check quotes and product specifications with your supplier before ordering.
