Garden Topsoil Calculator: m³, Tonnes and Bags
Calculates the topsoil or potting mix needed for a garden in m³ and tonnes, with the equivalent number of 40-litre bags and an estimated cost.
Filling a 2 m × 3 m bed to a depth of 20 cm takes 1.2 m³ of topsoil, which is 30 bags of 40 litres and weighs about 1.32 tonnes. The same volume of all-purpose potting mix weighs only 0.78 tonnes, a difference of 540 kg that changes how the delivery is planned.
Converting between cubic metres and bags is straightforward, since 1 m³ equals 25 bags of 40 litres. The mass is less predictable because it depends on the material. Topsoil weighs roughly 1.1 t/m³, all-purpose potting mix about 0.65 t/m³ and peat about 0.45 t/m³. A family car can carry only a few hundred kilograms, so a single cubic metre of topsoil almost always means several car trips or one delivery by lorry.
In Singapore, the right way to get the material depends on where the bed is. A landed house usually has driveway access for a lorry, while a condominium balcony or rooftop planter has a floor loading limit that heavy soil can exceed. Check with the management corporation or building management before ordering, and split a large volume into bags if the material has to be carried up a lift or a flight of stairs.
Depth matters more than most people expect. Ten centimetres more across a 6 m² bed adds 0.6 m³, which is 15 bags of 40 litres and about 0.66 tonnes of topsoil. Measure the depth you actually need before ordering, rather than rounding up on guesswork.
Enter the length and width of the area, the depth of the layer and the type of growing medium. The calculator returns the volume in m³, the number of 40 L bags and the total weight. If you already have a supplier quote, enter the price per m³ to see an estimated cost, or leave it at zero to skip the cost.
The result updates automatically.
For irregular beds, use the maximum dimension and scale the width proportionally.
Measure in a straight line, edge to edge.
Lawn: 4–6 in (about 10–15 cm) · Beds and shrubs: 8–12 in (about 20–30 cm) · Vegetable patch: 12–16 in (about 30–40 cm) · Trees: 16–24 in (about 40–60 cm)
This affects the total weight and reference price. Multi-purpose compost is the most common choice for home gardens.
Reference value for this type of substrate. Adjust to match the quote you've received. Enter 0 to ignore the cost.
Topsoil needed
Area: 20.00
Equivalent in 40 L bags
Approx. total weight: 2.60 t
Estimated material cost
For 4.00 at $80.00
- Area
- 20.00 m²
- Topsoil volume
- 4.000 m³
- 40 L bags needed
- 100 bags
- Estimated total weight
- 2.60 t
How it works
Formula
How the calculation works
How to calculate garden topsoil: volume, bags and weight
Preparing a garden bed starts with working out how much growing medium you need. The most common and most expensive mistake is underestimating that quantity, especially with bulk topsoil delivered by lorry, because a second delivery costs as much as the first once the delivery charge is added.
The formula: simple, with one detail that matters
The volume of topsoil comes from three measurements: length, width and the depth of the layer you are adding. A vegetable bed 5 metres long and 4 metres wide, filled to 30 centimetres, needs 5 × 4 × 0.30 = 6 m³ of soil.
The number of bags follows directly, because one cubic metre equals 25 bags of 40 litres. Bags are always rounded up to a whole number, since you cannot order part of a bag. The calculator applies that rounding automatically.
The mass is the volume multiplied by the density of the material. Density is the variable most people overlook, and it is the reason two beds of identical size can need very different lifting, transport and load planning. Topsoil can weigh more than twice as much as peat for the same volume.
The detail people often miss is settling. Loose material occupies more volume than it does once it has been watered and walked on for a few weeks. For bulk topsoil, allow a modest margin above the calculated volume, because the layer will settle. Bagged all-purpose potting mix settles less, so a smaller margin is usually enough.
Bags or bulk delivery: which is more economical?
The choice between bags and bulk delivery depends mainly on the quantity and on access to the site. For volumes of about one cubic metre or less, 40-litre bags are the practical option. They fit in the boot of a family car, you can work at your own pace, and unused bags can be stored without trouble. The cost per cubic metre is, however, considerably higher than for bulk material.
As the volume grows, bulk delivery becomes the more sensible choice. Topsoil from landscape nurseries and building materials suppliers arrives by lorry, and the price per cubic metre is much lower than for the equivalent bags, even after the delivery charge is added. For a vegetable bed of 20 square metres at 30 centimetres deep, which is 6 m³ in total, the difference can be very significant.
Before you accept a quote, check whether it includes delivery, the minimum order and any surcharge for tipping in a restricted area. Bulk delivery also needs a place where a lorry can reach and a clear spot where the load can be tipped. Access is usually straightforward at a landed property with a driveway. In a condominium or a terrace house with a narrow lane, it may not be, and that can change the cost of the delivery.
Types of growing medium and what to choose
Three main categories are generally available, although the range and the names used differ between nurseries and suppliers.
Topsoil: collected from natural soils, screened and sometimes enriched with compost. It is the heaviest, at roughly 1.0 to 1.2 tonnes per cubic metre, and the cheapest in bulk. It suits large volumes, vegetable bed preparation and levelling ground. Its pH depends on where it came from, so it can be acidic or alkaline. For intensive vegetable growing, test the pH before planting. ISO 10390 sets out how soil pH is measured, so ask for a result based on that method when you have the soil tested.
All-purpose potting mix: a blend of peat, perlite, compost and slow-release fertiliser. It is lighter, at roughly 0.6 to 0.7 tonnes per cubic metre, porous and good at holding moisture. It is the most common choice for home gardens and the most balanced option for flower beds, herbs and outdoor containers. Compare products using the datasheet, which should state the density, nutrient content and pH.
Peat-rich or premium mix: higher peat content, often sphagnum peat, with added micronutrients. It suits acid-loving plants such as rhododendrons and azaleas, and high-yield container growing. For an ordinary garden, the gain over all-purpose potting mix rarely justifies the extra cost.
Depth by type of planting
Depth determines how much you order. For a lawn sown from seed on prepared ground, 10 to 15 centimetres of growing medium is enough for most grass types, including the tropical species common in Singapore such as Zoysia and carpet grass. Turf laid in rolls needs a levelled layer of about 10 centimetres.
For flower beds with annuals and perennials, 20 to 25 centimetres gives roots room to grow without reaching compacted ground underneath.
In a vegetable bed, the minimum is 30 centimetres for crops such as tomato, chilli and cucumber. Carrots and other root crops need 40 to 50 centimetres of loose soil. Where the ground beneath is compacted, poorly draining or mixed with construction debris, raised beds with timber or brick edges are often more practical than digging out. For shrubs and hedges, 40 to 50 centimetres of good soil at planting prevents rooting problems in the first years, especially in heavy clay.
Drainage and compaction: what the tables do not show
New soil placed over existing ground compacts over the first months. This is normal and expected. The problem arises when the base does not drain: water collects at the boundary between the new soil and the old, causing waterlogging and root rot. Heavy rain, which is common in Singapore, makes this more likely on poorly draining ground.
The simplest fix for clay is to loosen the base with a fork or cultivator before adding the new layer. You can also mix in coarse river sand to improve the structure. Never use beach sand, which contains salt. On sloping ground or in formal beds, a geotextile membrane laid at the base stops the soils mixing without blocking drainage.
Edge cases and common mistakes
The formula assumes a rectangular area with an even depth. For an irregular bed, split it into rectangles, calculate each part and add the volumes. If the depth varies, use the average depth, which gives a fair estimate. A depth of zero gives zero volume, which is correct for a bed that needs no new soil.
The most frequent mistakes are predictable. Ordering the exact volume with no allowance for settling is the first. Measuring the outer edge of a raised bed frame instead of the inside overstates the soil needed, and this is the second. Forgetting that a bag holds 40 litres, not 40 kilograms, leads to confusion when the weight is estimated, because the weight depends on the material. Finally, ordering bulk soil without confirming where it will be tipped can leave a pile on the driveway that takes days to move.
When to use this calculator, and when not to
Use the calculator to size the quantity for a bed, a lawn or a vegetable plot, or to compare bags with bulk delivery. Do not use it as a design tool. It does not account for drainage, slope, irrigation layout or plant choice, and it does not replace a site inspection. A condominium with a restricted roof terrace, or a landed property with a steep slope, needs a site-specific assessment before any soil arrives.
When to consult a professional
This calculator sizes the material; it does not plan the garden. For projects over 100 square metres, steep slopes, automatic irrigation or landscape works that involve civil construction, a qualified landscape architect is usually the more economical route over the medium term. Retaining walls and raised structures may fall under the Building Control Act, so check the requirements with the relevant authority before you build. Ask any professional for proof of their qualifications before engaging them.
Frequently asked questions
How many 40-litre bags of growing medium do I need per square metre?
It depends on the depth you want. At 20 centimetres, each square metre needs 0.20 m³ of growing medium, which is 5 bags of 40 litres. At 30 centimetres, each square metre needs 0.30 m³, or about 7.5 bags, so expect 7 to 8 bags per square metre. Enter the real length and width of your area into the calculator to get the exact number of bags for the whole area, rounded up to whole bags.
What is the difference between topsoil and all-purpose potting mix?
Topsoil is collected from natural soils and is usually sold in bulk. It is heavier, at about 1.1 tonnes per cubic metre, and cheaper per cubic metre, which suits filling large areas. All-purpose potting mix is a formulated blend of peat, perlite, compost and slow-release fertiliser. It weighs about 0.65 tonnes per cubic metre, drains well and gives plants nutrients from the start. For flower beds and containers, all-purpose potting mix generally gives better results in the short term. For preparing large vegetable plots or lawn areas, bulk topsoil is the more economical choice.
How much does garden topsoil cost in Singapore?
Bulk topsoil is considerably cheaper per cubic metre than all-purpose potting mix in bags, and the gap widens as the volume grows. For larger volumes, bulk delivery is usually the cheaper option even after the delivery charge is added. For small quantities, bags are more convenient, though the cost per cubic metre is higher. Prices vary by supplier, by material and by delivery distance, so enter the quote you have received into the price field of this calculator. Compare at least two quotes and check whether they include delivery.
How deep should topsoil be for a lawn?
For a lawn sown from seed, 10 to 15 centimetres of prepared growing medium over loosened ground is enough for most grass types, including the tropical species common in Singapore such as Zoysia and carpet grass. For turf laid in rolls, a levelled layer of about 10 centimetres is sufficient. Where the ground beneath is very clay-heavy or very sandy, mix in coarse river sand or compost with the base soil before laying the final layer. Check the planting instructions for the grass you choose, as requirements vary.
Is it better to buy topsoil in bulk or in bags?
For volumes up to about one cubic metre, bags are more practical. They are easy to carry, simple to store and do not need a lorry to reach the site. For larger volumes, bulk delivery is usually cheaper per cubic metre, and the saving grows with the volume, particularly for vegetable plots and bigger projects. The main requirement for bulk delivery is access for a medium-sized lorry and a clear area where the load can be tipped. Check access before you order, and confirm the delivery and tipping arrangements with the supplier.
When should I hire a landscape architect?
For simple projects, such as filling a flower bed, building a vegetable plot or sowing a lawn, this calculator and some reading are usually enough. A qualified landscape architect is worth engaging when the project involves reshaping sloping ground, automatic irrigation, integrated paving or areas above 100 square metres. A professional helps avoid drainage errors, plants that do not suit the climate and long-term maintenance problems, which often costs less than correcting them later. Check the qualifications of any professional you hire.
View all Garden, Outdoor & Water calculators →
By RivoCalc · Reviewed under our editorial methodology · Updated 11 June 2026
Estimates only. Actual volumes, weights and costs depend on compaction, settling, site access and the supplier's delivery terms. Confirm quantities with your supplier before ordering.
