Skip to main content

Mortgage Amortization Schedule Calculator

Generates the full month-by-month mortgage amortization schedule, splitting each payment into interest and principal and showing the balance still owed.

On a 30-year fixed-rate mortgage at a 6.5% annual rate, about 86% of the first monthly payment goes to interest and only about 14% reduces the balance you owe. The amortization schedule shows how that split changes over time: the total payment stays the same every month, but the interest share shrinks while the principal share grows.

A mortgage amortization schedule lists every monthly payment of the loan. For each row it shows the interest portion, the principal portion and the balance still owed after the payment. Most US fixed-rate mortgages use level-payment amortization, a method in which the monthly payment is calculated once so that the loan is fully repaid at the end of the term. Interest is always charged on the balance that remains, which is why it is largest at the start.

Consider a suburban home in Phoenix financed with a 30-year loan at 6.5%. The balance falls slowly in the early years, so most of each payment is interest. The principal portion only becomes larger than the interest portion around year 19 of the term. In the final payment, interest accounts for less than 1% of the amount paid. Borrowers who look at the schedule for the first time are often surprised by how little of the early payments goes toward principal.

Because interest is calculated on the remaining balance, the loan term and the interest rate have a large effect on the total interest paid. A shorter term means higher monthly payments but a much smaller total interest bill, while a longer term lowers the payment and increases the overall cost. The schedule makes these trade-offs visible month by month, so you can see how quickly the balance falls under different assumptions.

The results are estimates. The calculator assumes a constant rate for the full term and does not include property taxes, homeowners insurance, mortgage insurance or other amounts that may be paid through escrow. Adjustable-rate loans reset the rate on dates set in the loan contract, and the schedule changes at each reset.

The explanation below uses US units; the calculator works in either system.

The result updates automatically.

Loan amount still owed to the lender

Number of years left on the loan

Reference index rate used for the loan's adjustable rate

Markup the lender adds on top of the index rate

Estimated monthly payment

$751.14

Calculated with a fixed payment on a standard fully amortizing schedule

Interest rate
4.40 %
Total interest paid
$120,411
Total paid over the life of the loan
$270,411

Monthly amortization schedule

MonthPaymentInterestPrincipalRemaining balance
1$751.14$550.00$201.14$149,798.86
2$751.14$549.26$201.88$149,596.98
3$751.14$548.52$202.62$149,394.36
4$751.14$547.78$203.36$149,191.00
5$751.14$547.03$204.11$148,986.89
6$751.14$546.29$204.86$148,782.03
7$751.14$545.53$205.61$148,576.43
8$751.14$544.78$206.36$148,370.07
9$751.14$544.02$207.12$148,162.95
10$751.14$543.26$207.88$147,955.07
11$751.14$542.50$208.64$147,746.43
12$751.14$541.74$209.40$147,537.03
1 of 30
Share

How it works

1

Enter the remaining loan balance, which is the principal you still owe the lender today.

2

Enter the remaining term in years, counting the time left until the loan is fully repaid.

3

Enter the annual interest rate from your loan documents. For an adjustable-rate loan, use the current index value plus the lender's margin.

Formula

P = C × [r × (1+r)^n] / [(1+r)^n − 1] | J(k) = S(k−1) × r | A(k) = P − J(k) | S(k) = S(k−1) − A(k)
P — Constant monthly payment (the same amount every month)
C — Balance owed at the start, before the first payment (principal outstanding)
r — Monthly interest rate, equal to the annual rate in percent divided by 1200
n — Number of monthly payments, equal to the term in years multiplied by 12
J(k) — Interest portion of payment k, equal to the balance before payment k multiplied by r
A(k) — Principal portion of payment k, equal to the payment minus the interest portion
S(k) — Balance still owed after payment k

How the calculation works

Mortgage Amortization Schedule: How a Fixed Monthly Payment Is Split

This calculator builds a full amortization schedule for a home loan. It takes the balance still owed, the remaining term and the annual interest rate, then calculates the constant monthly payment and shows, for each month, how much of that payment covers interest, how much reduces the principal and what balance remains. The method is level-payment amortization, also known as the French amortization method or the Price table in some countries. It is the standard structure for fixed-rate home loans in the United States, although the exact terms of each loan are set out in the loan documents.

Why the monthly payment stays the same

At the start of a loan the balance is at its highest, so the interest charged on it is also at its highest. Each payment reduces the balance a little, and the next month's interest is calculated on the smaller amount. If the total payment were kept constant, the interest share would fall and the principal share would rise in the same proportion, and that is exactly what the schedule shows. The formula finds the single payment that, applied every month, brings the balance exactly to zero after the last payment. Because the payment is fixed, the schedule is predictable from the first month to the last.

Reading each column of the schedule

The payment column is the total amount paid in a month and does not change. The interest column is the balance from the previous month multiplied by the monthly rate. The principal column is the payment minus the interest, so the two columns always add up to the payment. The balance column is the amount still owed after the payment, which falls each month and reaches zero at the end of the term. Reading these columns together shows how the loan is repaid over time.

The monthly rate and the annual rate

The calculator starts from an annual interest rate, written in percent. The formula uses a monthly rate equal to the annual rate divided by 1200, which is the same as dividing the percent by 12 and then by 100. For example, a 6.5% annual rate gives a monthly rate of about 0.54%. Use the interest rate stated in the note rather than the annual percentage rate (APR). The APR is a disclosure measure that also reflects certain finance charges, so it is not the rate that drives the interest calculation in the schedule. For an adjustable-rate loan, the current rate is the rate index, such as SOFR or the Prime Rate, plus the lender's margin. The schedule is a snapshot based on the rate entered, and it does not predict future index values.

Interest, principal and the balance over time

Early in the term the interest share is large. With a 30-year loan at 6.5%, about 86% of the first payment is interest. The share changes gradually. The principal portion only passes the interest portion around year 19, and by the final payment interest is below 1% of the amount paid. This is the main reason why extra principal payments made early in a loan have a larger effect than those made late. Each extra payment of principal removes the interest that would otherwise have been charged on that amount for every remaining month.

Term and total interest

Total interest equals the sum of all the interest entries in the schedule. For a long loan this total can be large compared with the original balance, because interest is charged over many years. Shortening the term from 30 years to 15 years raises the monthly payment but reduces total interest substantially, while extending the term does the opposite. A small change in the rate also has a multiplied effect on total interest, because the difference applies to the balance for the full term. The calculator lets you compare these trade-offs without changing the other inputs.

Edge cases

A zero interest rate means no interest accrues, so each payment is the balance divided by the number of payments, and the standard formula must be handled as a separate case because it is undefined at zero. A term of zero payments is not a valid loan, so the calculator should require at least one payment. A term of one payment means that single payment equals the balance plus one month of interest, and the balance reaches zero after it. A zero or negative amount leaves nothing to amortize, so the schedule has no meaning and the balance must be entered as a positive number.

When to use this calculator

Use the schedule when you need the balance at a specific future month, when you plan an extra principal payment, when you want to compare the effect of a shorter term on total interest, or when you want to understand what the early statements of your mortgage mean. It is also useful before a refinancing, to see how much of the balance has been repaid and how much interest has already been paid.

When not to use this calculator

Do not treat the schedule as the official figure for your loan. It assumes a constant rate, so it does not show the changes produced by an adjustable-rate loan. It does not include property taxes, homeowners insurance, mortgage insurance or other escrow items that may be part of the monthly bill. It also excludes origination fees, discount points and other closing costs, which change the total cost of borrowing even though they are not part of the payment formula.

Common mistakes

The most frequent errors are entering the annual rate where the monthly rate is needed, although the formula already divides by 1200, so the annual rate in percent is entered as it is. Another common mistake is entering the term in months when the field expects years, which multiplies the number of payments by twelve. Borrowers also sometimes use the APR instead of the note rate, compare the schedule with a lender statement without accounting for escrow amounts, or assume that the rate on an adjustable-rate loan stays fixed for the whole term.

Regulatory references and consumer resources

Under the Truth in Lending Act, implemented in Regulation Z and administered by the Consumer Financial Protection Bureau (CFPB), lenders must disclose the finance charge and the APR. The CFPB's TILA-RESPA forms, the Loan Estimate and the Closing Disclosure, show the projected monthly payment and the total cost of the loan, and they are the best documents to check against this schedule. Tax treatment of mortgage interest is set by the Internal Revenue Service, whose Publication 936 explains when interest may be deducted. Deductibility depends on the taxpayer, on whether they itemize deductions and on the applicable limits, so a tax professional should confirm the position for a specific case.

Summary

The amortization schedule turns one loan into a month-by-month record of payments, interest, principal and remaining balance. Its main value is showing how the split between interest and principal changes over the term, how the term and rate affect total interest, and what the balance will be at any future point. It is an estimate based on a constant rate, so it should be checked against the official loan documents before any borrowing or repayment decision is made.

Frequently asked questions

What is a mortgage amortization schedule?

An amortization schedule is the month-by-month breakdown of a mortgage. For each payment it shows how much goes to interest, how much reduces the principal and what balance remains afterward. It lets you see at any point in the loan how much you still owe and how much interest you will have paid by the end of the term. For a level-payment loan the total payment is the same every month, while the internal split changes. Lenders provide the official schedule with the loan documents, and this calculator produces an estimate you can use for planning.

Why is most of my early mortgage payment interest?

Interest is calculated on the balance still owed, and that balance is highest at the start of the loan. Early payments therefore carry a large interest charge, which leaves only a small part of each payment to reduce the principal. Using a 30-year loan at 6.5% as an example, about 86% of the first payment is interest. As the balance falls, each month's interest charge gets smaller, so a larger share of the same fixed payment goes toward principal. The principal portion only overtakes the interest portion around year 19 of that loan.

How is the monthly mortgage payment calculated?

The level-payment formula is P = C × [r × (1+r)^n] / [(1+r)^n − 1], where C is the balance owed, r is the monthly rate (the annual rate in percent divided by 1200) and n is the number of monthly payments (the term in years multiplied by 12). The formula returns the single payment that, made every month, repays the balance exactly by the end of the term. Each month's interest is then the previous balance multiplied by r, and the principal is the payment minus that interest. The same method is used throughout this calculator, so the payment, the interest split and the balance all agree.

Does the amortization schedule change when interest rates change?

Yes, for adjustable-rate mortgages. These loans set the rate by adding a margin to a rate index such as SOFR or the Prime Rate, and the rate is reset on dates set in the loan contract. At each reset the payment is recalculated over the remaining balance and term, so the schedule changes from that point. This calculator assumes a constant rate for the whole term, so its results are an estimate. For the exact figures after each reset, check the notices from your lender and the terms in your loan contract.

What is the difference between interest and principal in a payment?

Interest is the cost of borrowing: it is charged on the balance still owed, at the monthly rate. Principal is the part of the payment that reduces the balance and increases the equity you hold in the home. The two parts always add up to the total monthly payment, so a larger interest portion means a smaller principal reduction in that month. Early in a mortgage, interest is the larger part. Later in the term, principal becomes the larger part. Interest may be tax deductible for some borrowers, under rules set by the Internal Revenue Service.

How can I use the schedule to plan an extra payment?

Find the month in which you plan to make the payment and read the balance outstanding after the previous payment in the table. Subtract the extra amount from that balance to see the new balance. Each extra payment removes interest that would otherwise have been charged on that amount for the remaining months, so the earlier it is made, the larger the saving. Some loans have a prepayment penalty or specific rules for extra payments, so check your loan contract and ask your lender to apply the payment to principal.

Related calculators

By RivoCalc · Reviewed under our editorial methodology · Updated July 25, 2026

This calculator provides estimates for informational purposes based on the level-payment amortization method and is not financial, legal or tax advice. Actual results depend on your loan contract, the interest rate and any rate adjustments, escrow amounts, insurance, fees and other charges. Before making borrowing decisions, consult your lender, the official Loan Estimate or Closing Disclosure, or a licensed mortgage professional.