Fencing Cost Calculator (per Linear Metre)
Estimate the installed cost of a backyard fence from its length. Compare wire mesh, steel panels, timber and precast concrete, with materials and labour.
For a backyard measuring 12 m × 8 m, the perimeter to fence is 40 m long. At the calculator's 2.5 m post spacing, a 1.2 m galvanised wire mesh fence along that length needs 17 posts: 40 ÷ 2.5 = 16 spans, plus one final post. The total cost is the fence length multiplied by the combined material and labour price per metre. Labour often makes up a large share of an installed fence, so this calculator takes the two prices separately.
The estimate uses four inputs: the length to fence, the type of fence, and the material and labour prices from your quotes. Posts are counted separately, so you can check whether each quote includes them. Quotes differ in what they cover, and confirming what each one includes is the most important step before comparing prices.
The right fence depends on the property. A terrace in Melbourne with a shared side wall has different boundary rules and tighter access from a brick veneer house in Sydney with a wide side yard. A Queenslander in Brisbane with a low timber front fence faces other council limits than a house-and-land home in Perth with a steel boundary fence. Choose the fence type first, then check the height and boundary rules that apply to your property.
Gates, site preparation, removal of an old fence and automation sit outside the per-metre price and need their own quotes. The result is a planning estimate, not a binding price. Use it to see how the choice of fence type changes the total, and to spot quotes that look too high or too low for the length.
The result updates automatically.
Add up all the sections. For a 10 m × 8 m garden, the perimeter is 36 m.
This automatically updates the reference prices. Adjust to match the quote you've received.
Reference value for this type of fencing. Adjust to match the quote you've received.
Enter 0 to see the material cost only.
Estimated total cost
For 40 of fencing
Material cost
40 × $10.00 per unit length
Labour cost
40 × $10.00 per unit length
- Total length
- 40
- Estimated posts (every 2.5 m / 8.2 ft)
- 17
- Material cost
- $400.00
- Labour cost
- $400.00
- Total cost
- $800.00
How it works
Formula
How the calculation works
Fencing cost: how to calculate it in Australia
A new fence defines the edge of a property, changes how a home looks from the street and gives privacy and security to the backyard. The cost per linear metre varies a great deal with the type chosen, and the same length can produce very different totals depending on materials, posts and labour. Anyone who asks for quotes without knowing what each fence type includes is at a disadvantage when comparing them. The choice of fence is not only about price. It reflects durability, maintenance and installation effort over the whole life of the fence.
The calculation itself is direct. Multiply the length of fence by the combined price per linear metre, which is the material price plus the labour price. This calculator performs exactly that calculation. It also counts the posts needed and shows that number separately, so you can check whether each quote includes them. If a quote already includes posts in its per-metre rate, do not add them again as a separate item.
Fence types and what to weigh up
| Fence type | Maintenance | Installation effort |
|---|---|---|
| Galvanised wire mesh | Little routine upkeep | Simple on level ground |
| Timber fencing | Regular exterior stain, oil or preservative | Moderate, with timber posts and fixings |
| Demountable steel panels | Occasional touch-up painting | Moderate, with clips or brackets and posts |
| Precast concrete panels | Minimal routine upkeep | Demanding, with footings and heavy panels |
The table compares upkeep and installation effort only. It does not rank prices, because the cost of each option depends on the quotes you receive, the length, the height, the site and what each quote includes. Access, slope and ground conditions can raise the cost per metre for any fence type, so ask each installer to price them separately. Enter the figures from your own quotes for a personalised estimate.
The four most common fence types in Australia
Galvanised wire mesh is common on rural properties, large backyards and side boundaries where privacy is not the main concern. The mesh is galvanised steel, fixed to galvanised steel posts and tensioned with wire or clips. Installation is straightforward on level ground, which makes it a practical choice for a do-it-yourself project.
Demountable steel panels are powder-coated steel panels over electro-welded rod, fixed to posts with clips or brackets. They are a common choice for front and side boundaries of suburban family homes, and they give a long service life with minimal maintenance. Their total cost depends on the panels, posts and labour, so compare the quotes carefully on the same basis.
Timber fencing, usually palings or pickets in treated pine or a durable hardwood, suits naturalistic gardens and rural properties. Posts should be treated to H4 under AS 1604, the hazard level for in-ground use. Timber needs regular re-treatment with an exterior stain, oil or penetrating preservative. This recurring maintenance does not appear in the installed price, so include it when you assess the whole-of-life cost, and expect faster weathering in humid coastal areas.
Precast concrete panels are supplied in smooth or textured finishes, including finishes that imitate stone. They give privacy, very low routine maintenance and a long service life, provided the footings are designed correctly. Footings, posts and installation add to the cost per metre, so compare quotes carefully and check the footing method. They are a rational long-term choice where privacy and low maintenance matter most, but they also demand the most careful installation.
Posts and spacing: the detail that controls rigidity
For wire mesh and timber fences, post spacing affects stiffness and appearance. The calculator assumes a spacing of 2.5 m between posts. This is a modelling assumption that keeps the post count simple, not a requirement set by a standard. The spacing that suits a particular fence depends on its height, the fence system and how exposed the site is to wind, so confirm it against the manufacturer's specification or with your installer. For a 40 m run at 2.5 m spacing, the calculator counts 17 posts: 16 spans plus a final post. If you choose a closer spacing of 2 m, the same run needs 21 posts.
Wind actions on taller or solid fences are set out in AS/NZS 1170.2, the Australian and New Zealand standard for wind actions, so exposed sites deserve a check by an engineer or an experienced installer. Posts are usually set in concrete footings. Quick-setting concrete adds a small cost per post that should be included in the budget.
Quotes differ on whether posts are included, so confirm what is covered before comparing them. Check posts, footings, gates, hardware, removal of an old fence and site clean-up.
What always sits outside the per-metre price
Gates and doors are not part of the per-metre rate. A pedestrian gate with latch and hinges, a vehicle gate for driveway access and any automation are each separate quotes that add to the fence cost. Site preparation may also be charged separately. It covers clearing, excavating post holes and levelling. On a sloping block, stepping panels or raking the mesh can add a meaningful cost, so have the installer price it before you commit.
Rules, approvals and boundaries
Fence rules come from state and territory legislation and from local council planning schemes, so the rules for your property depend on where you live. Local planning rules may limit the height of fences on front boundaries, and may also control how solid a front fence can be. Heritage overlays, estate covenants and strata rules in some developments can also restrict materials, heights and colours. Check the local planning scheme before ordering materials.
A fence on a shared boundary is governed by state or territory dividing fences law. In New South Wales, for example, the Dividing Fences Act 1991 sets out notice requirements and how the cost of a dividing fence is shared between neighbours. Talk to your neighbour before you start, and confirm the position of the boundary using your title plan or a survey, because a fence built on the wrong line causes disputes.
Masonry, retaining walls and substantial footings can bring the work under building licensing rules, so check whether your job needs a licensed builder. Licensing is administered by state regulators such as NSW Fair Trading, the Victorian Building Authority and the Queensland Building and Construction Commission. Check the contractor's licence and insurance before you accept a quote.
When to hire a fencing contractor
For a short, simple wire mesh run on level ground, an experienced handy homeowner can often install the fence without difficulty. For steel panels with a gate, precast concrete walls, sloping blocks or work on a shared boundary, a specialist fencing contractor is usually the safer choice. Get two or three quotes with detailed specifications covering materials, number of posts, post spacing, footing method, fixing method and workmanship warranty, and compare them on the same basis.
Common mistakes
Many estimates go wrong in predictable ways. Measure only the fence line, because sections where a house wall forms the boundary do not need fencing. Gate openings also reduce the length of fence you need to buy, so subtract the width of each gate from the total. Compare fence heights like for like, because height changes the materials and posts needed. Check whether each quote includes GST, the goods and services tax administered by the Australian Taxation Office, before comparing it with the calculator result. And do not count posts twice, once inside the per-metre rate and again as a separate item.
Using the calculator with your quotes
Enter the total length in metres, choose the fence type and then enter the material and labour prices from your quotes. Entering 0 for labour shows the material cost only, which is useful for working out what a do-it-yourself installation would cost in materials. Change one input at a time to see which figure drives the total for your project. Keep the height of the fence the same across quotes so that the comparison stays fair.
What this estimate does not cover
The calculator is a planning tool. It does not include gates, doors, site preparation, removal of an old fence, rock excavation, allowances for sloping ground or GST. It also assumes that the per-metre rates you enter are complete for the chosen height and fence type. Actual costs depend on access, soil conditions, local labour rates and the installer's margin, so treat the result as a planning figure and not as a binding price.
Frequently asked questions
What does a fence cost per linear metre in Australia?
The installed cost is the material price plus the labour price per metre, multiplied by the fence length. The figure depends on the fence type, height, site access, slope and the installer, and it changes with the date of the quote, so no single figure applies everywhere. Enter your own quotes in the calculator for an accurate estimate. Ask each installer to state whether the price includes posts, footings, gates and removal of any old fence, so the figures compare like for like.
Which fence type is cheapest for a backyard?
The lowest total depends on your own quotes, the length of the boundary and what each quote includes, so compare the options in the calculator rather than relying on a general ranking. Wire mesh is usually the simplest type to install on level ground, which can reduce labour cost if you do the work yourself. Timber needs regular re-treatment with exterior stain or oil, and demountable steel panels and precast concrete walls need careful installation, so include upkeep and installation effort in the comparison as well as the price.
How many posts do I need for a 40 metre fence?
With the calculator's 2.5 m spacing between posts, 40 m needs ⌈40 / 2.5⌉ + 1 = 17 posts. If you choose a closer spacing, such as 2 m, the same 40 m needs ⌈40 / 2⌉ + 1 = 21 posts. The right spacing depends on fence height, the fence system and wind exposure, so confirm it with the manufacturer's specification or your installer. Quick-setting concrete for each post adds a small cost that should be in the budget. The calculator uses the 2.5 m spacing automatically.
Do I need council approval to build a fence in Australia?
It depends on your state or territory and your local council. Local planning rules can set height limits, and heritage overlays, estate covenants or strata rules can add conditions. Fences on a shared boundary are governed by dividing fences legislation, such as the Dividing Fences Act 1991 in New South Wales, so talk to your neighbour and check the rules for your state before ordering materials. Your local council can confirm what applies to your particular property.
Does a timber fence need a lot of maintenance?
Yes. Exposed timber needs regular re-treatment with exterior stain, oil or a penetrating preservative, otherwise it weathers, warps and decays faster, especially in humid coastal areas. Treated pine rated H4 under AS 1604 for in-ground use resists decay better at the start, but it still needs maintenance. By comparison, powder-coated steel panels usually need only occasional washing and touch-up of any scratches.
When should I hire a fencing contractor instead of doing the work myself?
A handy homeowner can often install simple wire mesh on level ground for a short run. Steel panels with a gate, precast concrete walls, sloping blocks and work on a shared boundary are better left to a specialist. A poorly installed fence, with posts out of plumb, mesh that is not properly tensioned or a wall without adequate footings, can cost more to correct than the labour saved. Get two or three written quotes with specifics on materials, number of posts, footing method and workmanship warranty.
Related calculators
View all Garden, Outdoor & Water calculators →
By RivoCalc · Reviewed under our editorial methodology · Updated 16 May 2026
This calculator gives an estimate for planning only. Real costs vary with fence type, site conditions, access, slope, local labour rates and the installer. Check council and state requirements before building, and confirm any quote in writing.
