Skip to main content

Garden Fence Cost Calculator per Metre

Estimates the installed cost of a garden fence per metre for four fence types, with the post count for your length.

A bungalow lot in Ottawa measuring 10 m × 8 m has a fence perimeter of 36 m. A 1.2 m galvanized wire mesh fence around that perimeter needs 16 posts at 2.5 m spacing: 36 ÷ 2.5 = 14.4, rounded up to 15, plus one final post.

The total cost is the fence length multiplied by the combined price per linear metre of material and installation labour. Labour is often a large share of that total, so a quote that lists only the material price can understate the real cost. Posts and concrete footings are a separate question. The post count is a quantity guide, and the cost itself uses the per-metre price, so include posts and footings in that figure if your quote lists them apart.

This calculator covers four fence types. Galvanized wire mesh is usually the lowest-cost option per metre. Removable steel panels cost more but need little maintenance over a long service life. Wood sits in the middle of the range and needs regular sealing or staining. A precast concrete wall has the highest upfront cost, the lowest upkeep and full privacy. Choosing between them is mostly a decision about budget, privacy and how much maintenance you are willing to do.

Fence rules in Canada are set locally. The municipal zoning bylaw usually sets fence height limits, and these can differ between front and rear yards. Footing depth for posts is a local building question, so confirm it with the municipality or your contractor before work starts. Check what each quote includes, because the same length can carry very different prices depending on who is doing the work.

Enter the length and the prices from your own quotes below. The result is a planning estimate that you can compare against the offers you receive from local contractors, and the sections that follow explain how each fence type and cost component works.

The result updates automatically.

Add up all the sections. For a 10 m × 8 m garden, the perimeter is 36 m.

This automatically updates the reference prices. Adjust to match the quote you've received.

Reference value for this type of fencing. Adjust to match the quote you've received.

Enter 0 to see the material cost only.

Estimated total cost

$800.00

For 40 of fencing

Material cost

$400.00

40 × $10.00 per unit length

Labour cost

$400.00

40 × $10.00 per unit length

Total length
40
Estimated posts (every 2.5 m / 8.2 ft)
17
Material cost
$400.00
Labour cost
$400.00
Total cost
$800.00

Turn this calculation into a quote for your client

We're building a tool for professionals. Be among the first to try it.

Share

How it works

1

Enter the total length to fence in metres. Add up every section of the perimeter.

2

Choose the fence type: galvanized wire mesh, removable steel panels, wood or precast concrete wall.

3

Enter the material price per linear metre from your quote. Include posts and footings in that figure if they are listed separately.

Formula

C_total = L × (p_m + p_lab) | N_posts = ⌈L / 2,5⌉ + 1
C_total — Estimated total installed cost, in local currency
L — Linear length of fence to build (m)
p_m — Material price per linear metre (local currency per m)
p_lab — Installation labour cost per linear metre (local currency per m)
N_posts — Number of posts at a standard spacing of 2.5 m between posts (a quantity guide, not a cost term)
⌈⌉ — Round up to the next whole number, since posts and fence sections are bought in whole units

How the calculation works

Garden fence cost: how to calculate it in Canada

A new fence marks the edge of a property, changes the look of the yard and gives privacy, or keeps children and pets inside. In Canada, the installed cost per linear metre varies a great deal by fence type, from galvanized wire mesh at the low end to a precast concrete wall at the high end. Homeowners who request quotes without knowing those differences are at a disadvantage when they compare bids. The fence type is also a long-term decision, because it sets the maintenance and replacement costs for years.

The calculation itself is direct. Multiply the total length to fence by the material price per linear metre, add the installation labour per linear metre, and the result is the estimated total. In the calculator's notation, C_total = L × (p_m + p_lab), where L is the length, p_m is the material price per metre and p_lab is the labour per metre. The result depends entirely on the prices you enter, which is why a figure from a written quote is more useful than any general reference.

Fence types and relative cost

Fence typeRelative material costRelative installed costMaintenance
Galvanized wire mesh (1 m)Very lowLowMinimal
Wood (1 m)Low to moderateModerateRegular sealing or staining
Removable steel panels (1.5 m)Moderate to highHighOccasional washing and touch-up paint
Precast concrete wall (1 m)HighHighVery low

The relative scale is a general guide to the order of costs, not a price list. Use the prices from your own written quotes for the actual figure. Labour time depends on site access, parking, the slope of the ground and the condition of the existing fence line, so the same length can cost more on one lot than on another.

The four most common fence types in Canada

Galvanized wire mesh is the least expensive option and is common in backyards, on rural properties and along property lines where visibility matters more than privacy. Mesh is available as welded or hexagonal galvanized rolls, usually around 1 m high. Posts are galvanized steel tubes about 40 mm in diameter, set at 2.5 m spacing, and the mesh is tensioned with wire or clips. A handy homeowner can install a simple mesh fence on level ground over a length of roughly 30 to 40 metres, but longer or sloped runs are better left to a contractor.

Removable steel panels are a popular choice for front yards and entrances in suburban homes. The panels are made from electro-welded steel bar with an epoxy powder coating and are usually 1.5 m high. The finish gives a long service life with little maintenance. Steel panels cost more than wire mesh, and once posts, footings and labour are added, the total is clearly higher.

Wood suits naturalistic gardens and is common on rural and lakeside properties. Vertical or horizontal boards of pressure-treated lumber or cedar are fixed to posts. Wood needs an exterior stain, sealer or preservative on a regular schedule. That recurring cost does not apply to wire mesh or steel, so include it when you compare options over the years rather than looking only at the first invoice.

Precast concrete wall gives full visual privacy and needs almost no maintenance. The panels, about 1 m high, come in smooth or textured finishes, and some imitate stone. The wall sits at the top of the cost scale per metre because of the panels, posts, footing and installation. It is the most durable option and a rational choice where privacy and low upkeep matter most, but the upfront investment is substantial.

Posts and spacing

For wire mesh and wood, post spacing governs rigidity and appearance. The standard spacing of 2.5 m suits a 1 m mesh fence on level ground. Taller fences of 1.5 to 2 m, and fences exposed to strong wind on open shorelines or in high-elevation areas, benefit from a spacing of 2 m. The post count follows the rounding rule in the formula, N_posts = ⌈L / 2.5⌉ + 1. The ⌈ ⌉ operator rounds up because posts are bought in whole units. For 36 m, that gives 15 + 1 = 16 posts, and for 40 m it gives 16 + 1 = 17 posts.

Post count is a quantity check, not a cost term. The total cost uses the per-metre material price, so posts, the concrete used to set them and any footings must be included in that price if your quote lists them separately. Before you compare bids, confirm exactly what each quote includes, since some list posts and footings apart from the per-metre price. Post footing depth is set by local building practice, so confirm it with the municipality or the contractor. The fast-setting concrete used to set each post is a small but real cost.

What stays outside the per-metre price

Gates are never part of the cost per metre. A pedestrian gate with a latch and hinges, a vehicle gate and any automatic opener are separate quotes that add to the fence total. Site preparation, such as setting out the line, digging post holes and levelling the ground, is often billed separately. On a sloped or uneven lot, that cost can be significant, so ask the contractor to show it as a separate line item.

Zoning, property lines and permits

Fence rules are set mainly by the municipality. The National Building Code of Canada 2020 is a model code, and each province and territory adopts and amends it, so it is not federal law. Fences that are not structural are usually governed by the municipal zoning bylaw, which can set maximum heights and may treat front yards differently from side and rear yards. Masonry or concrete walls with footings may fall under the building code, so confirm with the building department before you build one. Heritage properties and some planned communities may need approval first.

A fence on a shared boundary also raises a neighbour question. In Ontario, the Line Fences Act sets out how adjoining owners share the cost of a line fence, and other provinces have their own rules. Local authorities may have additional requirements, so check with the municipality before ordering materials.

Edge cases in the calculation

If you enter 0 for labour, the result shows only the material cost, which is useful when you are supplying the installation yourself. A length of 0 gives a total of 0. Because the formula is linear in length, doubling the length doubles the estimate when the per-metre prices stay the same. Costs that do not scale with length, such as a gate or site preparation, are not in the formula and must be added separately.

When to use this calculator

Use it at the start of a project to compare fence types for the same length, to check a contractor's quote against a rough estimate, or to see how much a longer boundary changes the total. Use it with the prices from written quotes, not with guesses.

When not to use this calculator

The calculator does not model gates, site preparation, retaining sections on slopes, curved or irregular boundaries, or the cost of removing an old fence. It also does not check height limits, setbacks or permit requirements. For those, get a separate quote or consult the municipality.

Common mistakes

Comparing per-metre prices where one quote includes posts and footings and the other does not. Leaving out labour, which is often a large share of the total. Counting gate openings inconsistently, so that the length does not match the quote. Forgetting that wood needs regular treatment, which changes the long-term ranking of the options. Rounding the post count down, when posts are bought as whole units.

When to hire a professional

A simple wire mesh fence on level ground, up to about 30 to 40 metres, is a reasonable project for an experienced DIYer. Steel panels with a gate, precast walls, sloped ground or a fence on a shared boundary with a neighbour are better handled by a specialist contractor. Ask for at least two or three written quotes that specify the materials, the number of posts, the footing method and the workmanship warranty. Confirm that the contractor carries liability insurance and workers' compensation coverage.

Shared boundaries, as with a townhouse in Calgary or a semi-detached home in Halifax, can bring neighbour and cost-sharing questions into the project before any work starts. The calculation is the same in every case, but the site and the local rules decide what the final number includes.

Frequently asked questions

How much does a garden fence cost per metre in Canada?

The installed cost, meaning material plus labour, depends on the fence type. Galvanized wire mesh is the least expensive option. Wood sits in the middle of the range, removable steel panels cost more to install, and a precast concrete wall is typically the most expensive but needs the least upkeep. Prices vary by region, supplier, site access and the length of the job. Compare quotes on the same unit, metres, so that every offer is checked against the same length. Enter the prices from your own quotes into the calculator for an estimate that reflects your situation.

What is the cheapest type of fence for a home garden?

Galvanized wire mesh is usually the lowest-cost option per metre installed. It is durable, needs little maintenance and is simple to install on level ground. Wood can be an attractive alternative when privacy and a natural look matter, but it needs regular sealing or staining to avoid rot, which adds to its long-term cost. Steel panels and precast walls last longer and look more finished, but the upfront investment is considerably higher. The right choice depends on privacy needs, the look you want and how much maintenance you are willing to do.

How many posts are needed for 40 metres of fence?

At the standard 2.5 m spacing between posts, you need ⌈40 / 2.5⌉ + 1 = 17 posts. Dividing 40 by 2.5 gives exactly 16, and one final post is added. Taller fences of 1.5 to 2 m, or fences in exposed, windy locations, use a 2 m spacing instead, which needs 21 posts for the same 40 m. Posts are set in fast-setting concrete, and the cost of that concrete should be included in your quote. The post count is a quantity guide. The calculator uses 2.5 m spacing for it, and the cost itself uses the per-metre price.

Do I need a permit to install a fence in Canada?

Permit rules are set by your municipality, not by a single national rule. Whether a permit is needed depends on the municipality and the type of fence, so ask the building department before you start. The zoning bylaw sets height limits, and these can be lower in front yards. Heritage properties, heritage districts and some planned communities may need approval first. A fence on a shared boundary is also governed by provincial rules. In Ontario, the Line Fences Act covers how neighbours share the cost. Check your municipality's zoning bylaw and speak with the building department before ordering materials.

Does a wooden fence need a lot of maintenance?

Yes. Exterior wood needs regular treatment with a stain, sealer or wood preservative, and without it the boards weather and rot faster. Wet coastal climates, such as those in Vancouver or Halifax, and humid conditions anywhere put more stress on wood. Pressure-treated lumber resists decay better than untreated wood at the start, but it still needs regular maintenance. Follow the product label for the recommended re-treatment interval. By comparison, removable steel panels with a powder-coated finish need little beyond occasional washing and touch-up paint.

When should I hire a professional instead of installing the fence myself?

A simple wire mesh fence on level ground, up to about 30 to 40 metres, is a reasonable project for an experienced DIYer. For steel panel fences with a gate, precast concrete walls, sloped ground or a fence on a shared boundary with a neighbour, a specialist contractor is the safer choice. Poorly set posts, untensioned mesh or a wall without proper footings can fail, and the cost of fixing those mistakes often exceeds the labour you saved. Request two or three written quotes that specify materials, post count, footing method and workmanship warranty.

Related calculators

View all Garden, Outdoor & Water calculators →

By RivoCalc · Reviewed under our editorial methodology · Updated May 16, 2026

This calculator gives an estimate for planning only. Actual costs vary with region, contractor, site conditions, material grade and local bylaws. Confirm heights, setbacks and permit requirements with your municipality before you buy materials, and base any decision on written quotes from licensed contractors.