Garden Fence Cost Calculator (Per Linear Metre)
Estimates the cost of a garden fence per linear metre for mesh, steel panel, timber or precast concrete, with materials and labour included.
For a semi-detached house in a Dublin suburb with a rear garden measuring 10 m × 8 m, the total boundary to fence is 36 m. With 1.2 m galvanised hexagonal mesh and a post every 2.5 m, that length needs 16 posts: 36 ÷ 2.5 = 14.4, rounded up to 15, plus one end post. The calculator multiplies the length by the material price and the labour price per metre, and it counts the posts separately so you can check that each quote includes them.
The fence type affects the price per metre more than any other input. Galvanised steel mesh is usually the least expensive option, while precast concrete walls sit at the top of the range. Demountable steel panels and timber fall between them, and their installed costs depend heavily on posts, footings and labour. A straight run on level ground is the simplest case, and sloping or uneven ground adds work that should be priced separately.
Labour is often a large share of the installed cost, particularly for panels, walls and sloping sites. Do not leave the labour rate at zero unless you only want to see material costs. Enter the rates from the quotes you have received, and check whether each one includes posts, concrete footings, gates and the removal of any old fence.
The result is an estimate for comparing options and checking quotes, not a fixed price. Prices vary by county, supplier, access to the site and ground conditions. Run the calculator for each quote on the same length to compare them fairly.
Planning rules and boundary lines should be checked before any work starts. The calculator does not assess them, but a fence built on the wrong side of the boundary line or above the permitted height can cause a dispute or a requirement to alter it.
The result updates automatically.
Add up all the sections. For a 10 m × 8 m garden, the perimeter is 36 m.
This automatically updates the reference prices. Adjust to match the quote you've received.
Reference value for this type of fencing. Adjust to match the quote you've received.
Enter 0 to see the material cost only.
Estimated total cost
For 40 of fencing
Material cost
40 × €10.00 per unit length
Labour cost
40 × €10.00 per unit length
- Total length
- 40
- Estimated posts (every 2.5 m / 8.2 ft)
- 17
- Material cost
- €400.00
- Labour cost
- €400.00
- Total cost
- €800.00
How it works
Formula
How the calculation works
Garden fence cost: how to estimate it in Ireland
A new fence marks the limit of a property, changes how a house looks from the outside and gives privacy. The cost per linear metre varies a great deal between fence types, from galvanised steel mesh, which is usually the least expensive, to a precast concrete wall, which costs the most to build but needs very little upkeep. Anyone asking for quotes without understanding how the options compare is at a disadvantage, because the fence type also determines durability, maintenance and the effort of installation over the years the fence stands.
The calculation itself is direct. The total length of the boundary is multiplied by the combined price per linear metre of material and labour. The number of posts is worked out separately, so you can check whether a quote has allowed for them. The result is an estimate for the fence line only. It does not include gates, groundworks beyond the fence line or the removal of an existing boundary.
Fence types and relative cost
| Fence type | Relative material cost | Relative installed cost | Upkeep |
|---|---|---|---|
| Galvanised steel mesh (1 m) | Very low | Low | Very little |
| Timber fencing (1 m) | Low to medium | Medium | Regular treatment with stain or varnish |
| Demountable steel panels (1.5 m) | Medium to high | High | Occasional touch-up painting |
| Precast concrete wall (1 m) | High | High | Minimal |
The relative scale reflects the general pattern in material ranges from large DIY retailers and builders' providers, and in quotes from local installers. In urban areas with restricted access, such as city centre terraces, labour rates tend to be higher, while rural and suburban sites usually sit at the lower end. Use the figures from your own quotes for a personal estimate.
The four main fence types
Galvanised steel mesh is the most economical option and is common for back gardens, side returns and farm boundaries. Welded or hexagonal mesh in hot-dip galvanised steel, usually 1 m high, is widely available from DIY retailers and builders' providers. Installation needs galvanised tubular posts, sized for the fence height and set in footings, and the mesh is tensioned with wire or clips. Because the material is light and simple to fit, it has the lowest installed cost per metre of the four types on level ground.
Demountable steel panels are a common choice for the boundaries of modern estate homes and for enclosing front gardens and driveways. The panels are made from electro-welded bar with a powder-coated finish and are usually 1.5 m high. They need very little maintenance and last for many years. Their cost sits between the middle and the top of the range, and once posts and labour are added, the installed cost is clearly higher than for mesh or timber. Many households accept that premium for the appearance and the long service life.
Timber fencing, with vertical or horizontal boards in pressure-treated softwood or hardwood, suits naturalistic gardens and sites where a softer look is wanted. The material costs less than steel panels, and with timber posts and labour the installed cost falls in the middle of the range. Timber needs regular treatment with a stain, varnish or preservative made for outdoor use. That upkeep recurs for the life of the fence and should be included in any whole-life comparison, which mesh and steel panels do not require to the same degree. Ask the supplier to confirm that any timber post set in the ground is treated for ground contact.
Precast concrete walls give full privacy, have a long service life and need almost no maintenance. The panels, about 1 m high, come in a smooth or textured finish, including finishes that imitate stone. They sit at the top of the cost range per linear metre. Once posts, foundations and installation are included, this is the highest initial investment of the four, but also the most durable. Where privacy and low upkeep matter most, it is the sound long-term choice.
Posts and spacing
For mesh and timber, post spacing controls the rigidity and appearance of the fence. The calculator assumes one post every 2.5 m, a practical working spacing for 1 m mesh on level ground. It is an assumption made for the estimate rather than a fixed rule, and the installer's specification should set the actual spacing. Taller fences, or fences on exposed sites such as the open coast or high ground, generally need closer posts, and each extra post adds to both material and labour. For a 40 m run at 2.5 m spacing, the calculator gives 17 posts: the length divided by the spacing, rounded up, plus one post to close the run.
Galvanised tubular steel posts are sold by the same types of supplier as the mesh and are set in concrete footings. Ask the supplier which concrete mix suits the ground conditions, and include the small cost of each footing in the budget. Most installers quote per linear metre with posts included, but confirm this before comparing offers.
A zero or negative length has no meaning in this calculation, so enter the actual measured length. A labour rate of zero shows material cost only, which is useful for comparing supplies but is not a realistic total for an installed fence.
What the price per metre leaves out
Gates and doors are never part of the price per linear metre. A pedestrian gate with a latch and hinges, a vehicle gate for driveway access and any automation are each separate items that add to the fence cost. Estimate them on their own, then add the totals.
Groundworks are often charged separately. Setting out the line, digging post holes and levelling the ground are part of the job, and on uneven ground with a significant slope the extra work can be considerable. Include it in the request to the installer rather than assuming it is covered. Removing an existing fence, wall or hedge is a further item in many cases.
Before ordering materials, confirm the exact line of the boundary. A fence built on the wrong side of the line can lead to a dispute with a neighbour and may need to be moved, which costs far more than checking the line at the start.
Planning rules and height limits
Whether a garden fence or boundary wall needs planning permission depends on its height, its location and the development plan of the local authority. Boundaries at the front of a house, or those next to a road, may be subject to different limits from rear boundaries. Properties in architectural conservation areas, protected structures and estates with their own planning conditions can face extra restrictions. The planning department of the county or city council can confirm the position for a particular site before any material is ordered.
When to hire a professional installer
A competent DIYer can usually fit a simple galvanised mesh fence on level ground over a straightforward run. Demountable steel panels with a gate, precast concrete walls, sloping or uneven ground and any boundary shared with neighbours are better handled by a specialist installer. Errors on these jobs are expensive to correct, and a specialist's scope and workmanship warranty give more protection than a saving on labour. Ask at least two or three contractors for quotes with specified materials, the number and type of posts, the fixing method and the workmanship warranty. Check that the contractor carries public liability insurance.
Common mistakes
Several errors appear repeatedly when people estimate fence costs:
- Measuring the garden on a plan rather than along the ground. A sloping boundary is longer than its plan length, and steps or changes of direction add more.
- Forgetting to decide whether a gate gap is deducted from the total length.
- Comparing quotes that cover different scopes, for example one that includes posts and footings and one that does not.
- Underestimating post numbers on exposed sites, where a closer spacing is needed.
- Leaving out the upkeep of timber, which changes the comparison over the life of the fence.
- Leaving out the removal of an old fence or any change in ground level.
When not to use this calculator
Use it for a straight or simple boundary with a clear fence type in mind. It is not suited to protected structures, to retaining walls or to any wall that carries load, since those need design by a qualified engineer. It is also no substitute for a site survey, a planning check or a written quote.
Use the calculator at the start to set a realistic budget range, then run it again with the quotes you receive. The comparison of total cost, not the headline price per metre, is what decides the best option.
Frequently asked questions
How much does a garden fence cost per linear metre in Ireland?
The installed cost, including materials and labour, depends mainly on the fence type. Galvanised steel mesh is usually the least expensive option, timber and demountable steel panels sit in the middle, and precast concrete walls cost the most to build but need the least upkeep. Prices vary by county, supplier, access and ground conditions, so use the calculator with figures from quotes you have received rather than a general rate. Ask each installer whether posts, footings and removal of any old fence are included, because that changes the comparison more than the headline rate.
What is the cheapest type of garden fence?
Galvanised steel mesh is usually the lowest-cost option per linear metre, both for materials and for installed work. It is durable, needs little maintenance and is simple to fit on level ground. Timber is a reasonable alternative where privacy and appearance matter more, but it needs regular treatment with a stain or varnish suitable for outdoor use, which adds to the cost over its life. Steel panels and precast concrete walls last longer and look more finished, but their initial cost is substantially higher. Whichever you choose, compare quotes on the same scope.
How many posts do I need for a 40 metre fence?
At the 2.5 m spacing used by the calculator, a 40 m run needs ⌈40 / 2.5⌉ + 1 = 17 posts, counting a post at each end. Taller fences, or fences on exposed sites such as the open coast, may need closer posts, which the installer should specify. A closer spacing adds posts, so it should be priced into the quote. Galvanised tubular steel posts are widely available, and each post needs a footing of ready-mixed concrete, which adds a small cost per post. Include that in your budget. The calculator uses the 2.5 m spacing automatically.
Do I need planning permission for a garden fence in Ireland?
Whether a garden boundary needs planning permission depends on the height and location of the fence and on the development plan of the local authority. Some properties, such as protected structures or sites in architectural conservation areas, can face extra restrictions. Check with your county or city council before ordering materials, and speak to your neighbours about the boundary line if the fence touches a shared edge.
Is a timber fence high maintenance?
Yes, more than mesh or steel. Exterior timber should be treated regularly with a stain, varnish or wood preservative made for outdoor use, or it weathers and decays, particularly in the damp conditions found in many parts of Ireland. Treated softwood has better initial resistance, but it still needs upkeep. The product data sheet gives the recommended interval for re-treatment, and that is the figure to follow. By comparison, steel panels and mesh need only occasional cleaning or touch-up painting.
When should I hire a professional instead of doing it myself?
A competent DIYer can usually fit a simple galvanised mesh fence on level ground over a straightforward run. Hire a specialist for demountable steel panels with a gate, precast concrete walls, sloping or uneven ground, and any boundary shared with neighbours, because errors there are costly to correct. A poorly installed fence, with posts out of plumb, mesh that is not properly tensioned or a wall with inadequate footings, can cost more to fix than the labour would have cost. Ask for itemised quotes that state posts, footings, fixings and workmanship warranty, and confirm the contractor carries public liability insurance.
Related calculators
View all Garden, Outdoor & Water calculators →
By RivoCalc · Reviewed under our editorial methodology · Updated 16 May 2026
This calculator gives an estimate for comparison only. Real costs depend on the fence type, supplier, site access, ground conditions, levels, planning requirements and the scope agreed with the installer. Obtain itemised quotes before committing to a budget, and check the boundary line and local planning rules first.
