Roof Tile Quantity Calculator
Calculates the roof tiles needed for a pitched roof: Marseille, canal-and-cover, Roman or plain tile, with a waste allowance and optional material cost.
A 60 m² pitched roof on a semi-detached house, using tiles with a yield of 10 per m² from the data sheet and a 10% waste allowance, needs 660 tiles. The count is the pitched area multiplied by the tiles per square metre, plus the allowance, rounded up to a whole tile. Change the yield and the total moves with it: at 8 tiles per m², the same roof needs 528.
The tile profile changes the count more than most people expect, because the number of pieces per square metre varies a great deal between profiles. A large interlocking concrete tile covers far more roof per piece than a small plain tile, so the same roof can need very different quantities. Many Irish roofs are finished in concrete interlocking tiles or natural slate. For these, and for any specific product, choose Custom and enter the yield from the manufacturer's data sheet. The calculator also offers Marseille, canal-and-cover, Roman and plain profiles, each with a starting yield that you can adjust.
Enter the real pitched area of the roof, not the plan area, which is the footprint seen from above. A drawing or a quick measurement from the ground often gives the plan area first, and using it is the most common reason for a short order. If the roof has several planes, measure each one and add the areas together. Then choose the tile type and the waste allowance. The calculator returns the total number of tiles, rounded up to a whole tile, so the result is never below the calculated need.
Use the result to budget and to check a quote. The count covers field tiles only. Ridge, hip and verge tiles, underlay and battens need to be ordered separately, so confirm the full order with the roofing contractor or the designer before you buy.
The result updates automatically.
The actual sloped surface area, not the plan (footprint) area
Typical value for the selected roof tile type
10% for simple roofs; 15% for roofs with multiple pitches or complex ridge lines
Check the unit price with your supplier for the model you've chosen
Roof tiles needed
includes 128 pieces of waste allowance
- Roof area
- 80.0 m²
- Coverage rate
- 16 pieces
- Tiles before allowance
- 1,280 pieces
How it works
Formula
How the calculation works
How many roof tiles do I need for my roof?
Ordering roof tiles is one of the few estimates in a house build where a small error causes a long delay. A roof order that runs short partway through leaves the house open to the weather while replacement tiles are delivered, and matching a batch months later is rarely straightforward. The basic formula is simple: multiply the roof area by the yield in tiles per square metre, then add the waste allowance. Most errors come from using the plan area of the roof instead of the real pitched area.
For a 30% pitch, the real surface is about 4.4% larger than the plan area. At 45%, it is about 9.7% larger. On a footprint of 80 m², that is roughly 3.5 m² of extra roof at 30% and about 7.7 m² at 45%, enough to leave one or two rows of tiles short on the last section.
Roof tile profiles
The calculator offers four common profiles and a custom option. Each profile has a yield filled in as a starting point, but the yield depends on the exact size, the overlap and the manufacturer. The data sheet of the product you are ordering is the reference, and the calculator value should be checked against it.
Marseille tile: a rectangular interlocking tile with a mechanical side and head lock. Its interlocking shape makes it quick to lay, which is why it is often chosen for new roofs.
Canal-and-cover tile: a traditional curved tile made of two parts, a channel laid in a row and a cover set over the joint between two channels. Laying takes longer and needs careful alignment, but the finish is the traditional one. It is most often chosen where the look of an older building has to be matched, such as in a restoration. Counted together, a channel and a cover form one unit of coverage, and the overlap chosen changes the yield.
Roman tile: similar in shape to the Marseille tile but with a softer profile. It is a common choice on Mediterranean-style houses.
Plain tile: a small flat tile with a plain, understated look. Because each piece covers little area, a roof needs many more plain tiles than it would of larger profiles.
Interlocking profiles are generally quicker to lay than canal-and-cover tiles. For concrete interlocking tiles, which follow the European product standard EN 490, and for natural slate, use the custom option and enter the number of pieces per m² from the data sheet. The same method applies to every product.
Common mistakes
The most frequent errors are easy to avoid. Using the plan area instead of the pitched area leaves the order short. Entering a pitch in degrees where the formula expects a percentage gives a wrong conversion. Taking the yield from a different profile, or from a general figure instead of the product's own data sheet, changes the count by a large amount. Forgetting the ridge, hip and verge tiles leaves the job stuck at the end, when the roof is nearly finished.
How to measure the real roof area
The area that matters is the pitched surface, not the plan area. Take a single-pitch roof that measures 10 m along the eaves and 5 m across on plan, with a 35% pitch. The rise over the 5 m run is 1.75 m, so the real width of the slope is √(5² + 1.75²) ≈ 5.30 m. The real area is therefore 10 × 5.30 = 53 m², against 50 m² on plan.
If you know the plan area and the pitch but not the pitched area, use this conversion:
Real area = Plan area × √(1 + (pitch in % ÷ 100)²)
For a dual-pitch roof with 80 m² on plan and a 35% pitch, the real area is about 80 × 1.059 ≈ 85 m².
Pitch can be given in degrees or as a percentage, and the two are easy to confuse. To convert an angle to a percentage, use pitch in % = tan(angle) × 100. A 30° roof is a 58% pitch, while a 30% pitch is only about 16.7°. Check which unit the drawing or the roofer uses before you enter a number.
If you are replacing an existing roof, a surveyor can measure the pitched area on site. For a new build, the architect or designer should state the area of each roof plane in the specification or the bill of quantities.
Waste allowance and rounding up
A waste allowance of 10% suits a simple rectangular roof with no breaks. Several planes, dormers, hips and valleys push the allowance up to 15%, and older or irregularly shaped roofs can need more. The allowance covers three sources of loss: cuts along the edges, especially at the gable ends; breakages during delivery and laying; and spare tiles for future repairs.
Keep a few spare tiles from the same batch in a dry store. Finding the same profile and colour years later is often difficult, so spares are one of the cheapest forms of insurance a roof can have. The calculator rounds the result up to a whole tile, so the figure is never below the calculated need.
What the calculator does not include
The formula assumes a regular roof with a consistent yield. Real results move with the tile dimensions, the overlap, the cut pattern at the edges and the way the roof is laid. The calculator covers the field tiles only. Ridge tiles, hip and verge tiles, underlay, battens and fixings are not included, so order them separately using the supplier's guidance. Use the waste allowance to absorb the extra cuts that hips, valleys and dormers create.
When to call a roofing contractor
This calculator is a budgeting and checking tool. It does not replace a roof design. For a full replacement or a new roof, use a roofing contractor with a verifiable track record. They should check the structure, including battens, rafters, wall plates and trusses, the underlay or breathable membrane, and the detailing at ridge, hip, valley and eaves. The tiles must be fixed and pitched to the manufacturer's instructions and the product standard: EN 1304 for clay tiles and EN 490 for concrete tiles.
The Irish Building Regulations set requirements for the structure (Part A) and for resistance to moisture (Part C), and the Technical Guidance Documents explain how to comply with them. The regulations and guidance are published by the Department of Housing, Local Government and Heritage. On older buildings, have the timber structure inspected before any covering work.
If the property is a protected structure or sits in an architectural conservation area, check with the local authority before you change the roof covering. Under the Planning and Development Act 2000, works that affect the character of a protected structure, and works in an architectural conservation area, can need planning permission or a declaration from the local authority. The local authority can also attach conditions to the work, including on materials.
Frequently asked questions
How many roof tiles do I need for 100 m² of roof?
It depends on the yield of the tile you choose. As a worked example, with a yield of 10 tiles per m² from the data sheet and a 10% waste allowance: 100 × 10 × 1.10 = 1,100 tiles. With a yield of 13 tiles per m², the same 100 m² needs 1,430 tiles. These figures assume 100 m² of pitched roof surface, not plan area. For an exact count, enter the real pitched area and the yield from your product's data sheet in the calculator.
What is the difference between Marseille and canal-and-cover tiles?
A Marseille tile is a single interlocking piece with a mechanical side and head lock, which makes it quick to lay. A canal-and-cover tile is made of two parts: a channel laid in a row and a cover set over the joint between two channels. Laying takes longer and needs careful alignment, but the finish is traditional, so canal-and-cover is often chosen when restoring older buildings. The yield of each profile differs, so take the figure from the data sheet of the product you order.
Should I use the plan area or the pitched area of the roof?
Always use the pitched area, which is the real surface of the roof. The plan area is always smaller, so using it leaves you short of tiles. To convert, use: pitched area = plan area × √(1 + (pitch % ÷ 100)²). At a 30% pitch the factor is 1.044, and at 45% it is 1.097. For example, an 80 m² plan area at a 30% pitch gives about 83.5 m² of tiled surface.
What is the minimum pitch for each tile type?
The minimum pitch depends on the profile and the manufacturer, so take the figure from the tile's data sheet and the product standard, EN 1304 for clay tiles or EN 490 for concrete tiles. Below the minimum pitch stated there, rain is more likely to be driven under the tiles, so the data sheet range is the figure to follow. Ask the roofer to confirm the pitch of your roof against that range before you order, since changing the pitch after the structure is built is costly.
Can I mix tiles from different batches on the same roof?
In practice, it is best not to. Tiles from different production batches can vary a little in size, colour or glaze, and the difference often shows after a few years of sun and rain. The waste allowance is there for this reason: order a little more than you need from one batch, lay the roof from it, and keep the spares in a dry store. If you do have to use a second batch, spread tiles from both batches across the whole roof rather than laying one batch in a single section.
When should I hire a roofing contractor?
For any full replacement or new roof, hire a roofing contractor with a verifiable track record. This calculator is a budgeting tool and does not replace a roof design. A contractor checks the structure (battens, rafters, wall plates and trusses), the underlay or breathable membrane, and the detailing at ridges, hips, valleys and eaves. On older buildings, have the timber structure inspected before any covering work. If the property is a protected structure or sits in an architectural conservation area, check with the local authority first. Under the Planning and Development Act 2000, works affecting such a building can need planning permission or a declaration.
Related calculators
By RivoCalc · Reviewed under our editorial methodology · Updated 3 June 2026
This calculator gives an estimate for budgeting and ordering. Real quantities depend on the tile product, the roof shape and the laying method. Check the tile data sheet and confirm the order with a qualified roofing contractor. Roof structure and covering must meet the Building Regulations and local planning requirements.
