Skip to main content

Entry Door Cost Calculator for Singapore

Estimate the cost of a new entry door in Singapore, covering timber, aluminium and RC2 security doors, with optional installation and removal.

An entry door certified to EN 1627 class RC2 resists at least 3 minutes of forced-entry attack with simple hand tools. The total is the door price plus installation plus, when needed, removal of the old door, so the estimate depends on three choices rather than a single figure. The door price covers the leaf, frame and hardware. Installation covers fitting the frame, fixing it to the wall and adjusting the door. Removal is added only when you tick that option.

The cost of an entry door in Singapore depends mainly on three things: the door type, its security certification and whether installation is included. A timber or aluminium door without certification has no tested resistance to forced entry, and the difference in protection from a certified RC2 door is substantial. RC3 adds power tools and a five-minute test, which suits homes with higher exposure or valuable contents.

Certification covers the whole assembly: leaf, frame, lock and hinges. A certified RC2 lock fitted to an ordinary timber leaf does not make the door RC2. Ask for a test certificate from an accredited laboratory before you buy.

Whether you live in a 4-room HDB flat in Tampines, a condominium in Bukit Timah or a landed house in Bishan, measure the opening and check which approvals apply to your building before ordering. Changes to a main door can need approval from HDB or the management corporation, depending on your home type.

This calculator gives a budgeting estimate. Use it to compare door types and options, and see which part of the total changes most when you switch between them. Then ask for at least two or three written quotations that match the inputs you used.

The result updates automatically.

The reference cost of an entry door in Singapore depends on the door type, its security class, whether installation is included and whether the old door must be removed. Enter the figure from your own written quotation to refine the estimate. Building type matters: HDB flats, condominiums and landed homes can follow different approval routes for the main door.

Fitting the frame, hanging the leaf, adjusting the ironmongery and sealing around the edge.

Removing the existing frame and leaf, and taking them to the tip.

Estimated total cost

~$1,840.00

Estimate based on the prices entered.

Door + frame + ironmongery
$1,500.00
Installation
$225.00
Removal of the old door
$115.00
Estimated total
$1,840.00

Turn this calculation into a quote for your client

We're building a tool for professionals. Be among the first to try it.

Share

How it works

1

Choose the entry door type: timber, aluminium or certified security door.

2

Tick the installation option if you want the labour of a carpenter or metalwork contractor included.

3

If the old door needs removing, tick the removal option as well.

Formula

C = Pd + Pi + Prm
C — total estimated cost
Pd — cost of the door (leaf, frame and hardware)
Pi — installation cost: fitting the frame, fixing it to the wall and adjusting the door
Prm — cost of removing the old door, when applicable

How the calculation works

Entry door cost in Singapore: from standard timber to RC2 and RC3 security doors

A new entry door improves security, sound insulation and thermal performance, and it changes how a home looks from the street. The price varies widely with the material, the security certification and whether a specialist installs it. This calculator splits the total into three parts, so you can see where the money goes and test different combinations before you ask for quotations.

What the calculator computes

The total is C = Pd + Pi + Prm. Pd is the price of the door itself, meaning the leaf, frame and hardware. Pi is the installation cost, which covers fitting the frame, fixing it to the wall, hanging the leaf and adjusting the gaps. Prm is the cost of removing the old door, and it applies only when you tick that option.

Edge cases are simple. When removal is off, Prm is zero and the total covers only the door and installation. When installation is off, Pi is zero and the total is the door price, which is useful if your contractor quotes labour separately. If the door price is entered as zero, the total shows only the work you have selected, which helps when a supplier has already included the door in another quotation.

The formula is additive on purpose. Each part depends on a different input, so a change to the door type affects Pd, a change to the installation option affects Pi, and a change to the removal option affects Prm. The formula applies no hidden multiplier, discount or contingency. Any margin you want for unexpected works should be added by you, separately from the total.

Door types commonly available

Timber doors, solid or engineered, are the lowest-cost option. They are common in older homes and usually offer no security certification. Their lifespan depends heavily on exposure. A door facing rain or strong sun needs regular finishing, and a door that is not maintained will warp, swell or split over time. The durability of a timber door therefore depends on the finish and the maintenance it receives, not on a single fixed figure.

Aluminium and composite doors use an aluminium skin around an insulating core. They resist corrosion well and suit exposed facades, but an ordinary aluminium door is not a security product unless it carries a certified security rating. Buyers often confuse the two, so check the rating rather than the material name.

Security doors certified to EN 1627 are the most balanced choice for protection against forced entry. An RC2 door typically has a steel frame, a reinforced leaf, a multipoint lock and hinges designed to resist forced removal. RC3 and higher armoured doors add a steel plate inside the leaf, a reinforced profile and a high-security lock. They suit homes with higher exposure or valuable contents.

The EN 1627 classes

EN 1627:2011 classifies the resistance of doors, windows, curtain walls, grilles and shutters to forced entry. The classes run from RC1 to RC6, which replaced the earlier WK1 to WK6 designations. For a main entry door, the classes most people consider are these:

  • RC1: basic manual resistance. It deters casual attempts without tools and is not a suitable standard for a main entrance.
  • RC2: tested against three minutes of attack with hand tools such as a crowbar and screwdriver. It is a common minimum for a main door.
  • RC3: tested for five minutes with hand and power tools. It suits higher-exposure homes and properties with valuable contents.

Certification applies to the complete set. The test covers the leaf, frame, lock, hinges and fixings together, so the class of a door is only as good as its weakest component. A certified lock fitted to an uncertified leaf does not create a certified door. Ask the supplier for the test report from an accredited laboratory, and check that the lock is certified to the same class as the door.

Local authorities may apply requirements beyond the European standard, so the EN class is a technical reference, not a permit. Treat it as the basis for comparing products, and confirm the building rules that apply to your property separately.

Singapore context: HDB flats, condominiums and landed homes

Building type affects both the work you can do and the approvals you need. An HDB flat, a condominium and a landed house can each have different rules for the main door. Owners of HDB flats should check HDB's renovation requirements before changing the main door. Owners in condominiums should check the management corporation's by-laws, because entrance doors and common corridors may be subject to fire and appearance requirements. Owners of landed houses should confirm that the new door complies with the building rules that apply to their property.

Fire-rated doors are a separate requirement. A door on an escape route or in a common area may need a fire-resistance rating such as EI30, classified under EN 13501. The Fire Code, administered by the Singapore Civil Defence Force, determines where such doors are required. This calculator does not check fire-rating requirements, and a security door certified for burglary resistance is not automatically a fire-rated door.

The practical rule is to measure first and check second. Measure the opening width, height and depth, note the swing direction and confirm whether the building rules require approval before ordering. A door ordered for the wrong opening or the wrong swing has to be returned or rebuilt, and the cost of that mistake usually exceeds the cost of the checks.

What installation covers

Installation is the most commonly underestimated part of the total. A carpenter or metalwork contractor removes the old frame if needed, fixes the new frame to the wall, hangs the leaf, sets the gaps and seals the perimeter. The number and type of anchors depend on the wall construction and on the manufacturer's fixing instructions.

For a security door, installation must follow the manufacturer's fixing method. A certified door fitted badly can perform like a standard door, because the frame and anchors are part of the tested assembly. This is why the installation line in the calculator should not be set to zero for an RC2 or RC3 door unless a specialist will install it and the quotation says so.

When you request quotations, ask whether the price includes finishing of the reveals, sealing of the perimeter, adjustment of the lock and disposal of the old door. These items are often left out of a headline installation price and then appear as extras.

Removing the old door

Removal covers taking off the leaf and frame, making good the opening and disposing of the old door. The removal cost matters most when the old frame is damaged, when the opening needs enlarging or when the new door is a different size from the old one. Enlarging an opening changes the work considerably and should be quoted separately from a like-for-like replacement.

If the old door is being replaced like for like, check whether the existing frame can be reused. For a security door, a new frame is usually the safer option, since the frame is part of the tested assembly and an old frame may not match the new leaf.

Common mistakes

The first mistake is choosing by the price of the leaf and forgetting the frame. The frame is part of the protection, and it is sometimes sold separately, so the quotation should state exactly what is included.

The second mistake is not checking the swing direction. Confirm whether the door opens inward or outward before ordering, because a wrong direction usually means replacing the frame or returning the complete set.

The third mistake is keeping an uncertified lock. The lock is often the weakest part of a standard door. An RC2 door should come with a lock certified to the same class, and the lock should be specified by its class rather than by its appearance.

The fourth mistake is assuming that a door labelled security or armoured is certified. In the commercial market these labels are not always used strictly. Ask for the test certificate and read the stated class.

The fifth mistake is ignoring the building rules. Check the approvals that apply to your property before ordering, not after the door has been delivered.

When to use this calculator

Use the calculator to plan a budget, compare door types and see how installation and removal change the total. It works best for standard single-leaf doors in common sizes. It is also useful for explaining to family members or a building manager why one option costs more than another, because each part of the total is shown separately.

When not to rely on it

Consult a specialist if the door is non-standard in size, opens outward, integrates with a smart lock or video intercom, needs a fire-resistance rating, or sits in a building with strict rules for entrance doors. In these cases the calculator can only provide a starting point, and the real scope of work will depend on site inspection.

Estimates, not quotations

The calculator produces an estimate. Actual costs depend on the door specification, its certification, the supplier, site access, the condition of the wall and whether the opening needs repair before the new door can be fitted. Written quotations are the only reliable basis for a purchase decision.

A useful quotation states the reference and certification of the door, the frame type and fixing method, the lock model and its class, whether installation includes finishing and sealing, and the scope of removal and disposal. Comparing two or three quotations written on this basis is far more informative than comparing headline prices.

Before committing to any work, confirm the approvals required for your building and keep the test certificate and the installation records for future reference, including for any insurance or sale of the property.

Frequently asked questions

What determines the cost of a new entry door in Singapore?

The main factors are the door type (timber, aluminium or certified security door), the security class, whether installation by a carpenter or metalwork contractor is included, and whether the old door must be removed. A standard timber door costs much less than an RC2 security door with a steel frame and multipoint lock, but the protection level is very different. Use the calculator to compare these options side by side, then request written quotations that show each part separately so you can compare like with like.

What does an RC2 or RC3 security rating mean?

EN 1627 is the European standard for forced-entry resistance. It defines six classes, RC1 to RC6, formerly WK1 to WK6. An RC2 door is tested against three minutes of attack with hand tools such as a crowbar and screwdriver. RC3 adds power tools and a five-minute test. The rating applies to the complete assembly, including the leaf, frame, lock and hinges, so a certified lock fitted to an uncertified door does not give RC2 protection. Ask for the test certificate from an accredited laboratory before buying, and confirm that the lock is certified to the same class.

Is installation included in the door price?

Usually not. Many suppliers quote the door, frame and hardware only, with installation charged separately. Installation covers removing the old frame if needed, fixing the new frame to the wall, hanging the leaf, adjusting the gaps and sealing the perimeter. For RC2 and RC3 doors, specialist installation matters, because poor fitting can stop the door performing as certified. Turn on the installation option in the calculator to include this cost, and check whether the quotation covers finishing of the reveals and disposal of the old door.

Which entry door suits a flat or a landed house in Singapore?

There is no single answer, because the right choice depends on the building type, the exposure of the door and the approval rules that apply. Owners of HDB flats and condominiums should check the rules for the main door before ordering, including any fire-related requirements for doors on escape routes or in common areas. For a landed house, an RC2 door is a common choice for a main entrance, and an RC3 door suits higher-exposure homes or properties holding valuable contents. Ask your home contents insurer whether a certified door affects your policy terms.

What is the difference between an armoured door and a security door?

In everyday usage, an armoured door has an internal steel plate and a rating of RC3 or higher. A security door is the general term for any door certified to EN 1627, from RC1 upward. In the commercial market the labels are not always used strictly, so a door marketed as armoured may be only RC2. The reliable way to compare doors is to read the certified class and the test report rather than the marketing name. Ask for the accredited test certificate before you buy.

When should I consult a specialist instead of relying on this calculator?

Consult a specialist if the door is a non-standard size, opens outward, integrates with a smart lock or video intercom, needs a fire-resistance rating such as EI30 under EN 13501, or sits in a building with strict rules for entrance doors. The calculator gives a budgeting estimate for standard single-leaf doors. For real works, obtain at least two or three written quotations that describe the door reference and certification, the frame type and fixing method, the lock and its class, and whether installation includes finishing and sealing.

Related calculators

View all Renovation & Systems calculators →

By RivoCalc · Reviewed under our editorial methodology · Updated 15 July 2026

This calculator gives an estimate for budgeting only. Actual costs depend on the door specification, certification, supplier, site conditions and any repair work to the opening, so real quotations may differ. Confirm the security certification, fire-rating requirements and building approvals with the relevant authority or a qualified contractor before ordering.