Garage Construction Cost Calculator, Singapore
Estimates the cost of building a garage on a Singapore landed property, from floor area, structure type, gate and electrical works.
A single-car garage of about 16 m² of usable floor area, built as a concrete block structure with a reinforced concrete slab, is a realistic example for a landed home in Singapore. To estimate its cost, multiply the 16 m² by the installed rate per m² for the structure type you choose, then add the gate and the electrical works as separate lines. Those two lines do not grow with floor area, so they must be priced on their own. The calculator performs this sum in one step and shows the result as three scenarios.
Quotes for garages can differ widely even for the same floor area. Three factors move the total more than area alone does. The first is the structure type: prefabricated steel, concrete block with a roof, or an extension attached to the house. The second is the site: ground conditions, drainage, slope, and how easily materials can reach the plot. The third is the finish level, which covers the floor finish, the gate and the electrical scope. Comparing quotes only works when each one states these items separately, so ask every contractor for the same breakdown.
The three structure types are built in different ways. Prefabricated steel garages arrive in sections, are bolted onto a prepared slab and can be erected in a short time. They suit utility use well, but they usually look more functional than a house built in concrete. Concrete block garages need masonry work, a reinforced concrete slab and a roof, which takes longer on site. They blend with a house and hold up well with routine maintenance. An extension attached to the existing house shares a wall and roof with the main building, so it needs structural connections, weatherproofing and a finish that matches the house. It carries the highest rate per m² of the three.
Singapore's landed property rules shape what can be built. Garages suit landed homes such as bungalows, semi-detached houses and terrace houses, where the plot has space for a building and a driveway. A landed house in Bishan and a bungalow in Bukit Timah can have different setback, plot ratio and height limits, which are set under the Planning Act through the [Urban Redevelopment Authority (URA) Master Plan](https://www.ura.gov.sg) for each plot. HDB flats and condominium units usually park in shared or allocated car parks, so this calculator is aimed at landed properties. Building works generally need approval under the [Building Control Act](https://sso.agc.gov.sg), administered by the [Building and Construction Authority (BCA)](https://www.bca.gov.sg), and electrical work must be carried out by a licensed electrical worker licensed by the [Energy Market Authority (EMA)](https://www.ema.gov.sg) under the Electricity Act. Check these requirements before requesting quotes, because they determine what each contractor has to include.
The result updates automatically.
1 car: 151–194 sq ft (about 14–18 m²) · 2 cars: 269–388 sq ft (about 25–36 m²) · With storage: 323–538 sq ft (about 30–50 m²)
Singapore conventions: floor areas are entered in square metres, the metric convention used across this calculator. Garages on landed plots are subject to planning rules (setbacks, plot ratio and building height) and to building approval under the Building Control Act. Electrical supply is single-phase 230 V, and electrical installation work is carried out by a licensed electrical worker licensed by the Energy Market Authority.
Includes the door, motor and installation. Adjust to match the actual quote.
Lighting circuit, sockets and partial consumer unit work.
Estimated total cost
For 20 · $580 total
- Building work
- $9,500
- Door
- $1,500
- Electrics
- $600
- Cost per unit area (estimate)
- $580/m²
How it works
Formula
How the calculation works
How much does a garage cost to build in Singapore
A garage cost estimate is only as good as the rates and quotes that feed it. The calculator is a planning tool. It multiplies the usable floor area by an installed rate for the structure you choose, then adds the gate and the electrical works. The result shows how the cost breaks down, so you can see which line dominates and which quote items are missing.
The formula and each term
The calculation is C_total = (A × price/m²) + C_gate + C_electrical. A is the usable floor area of the garage in square metres, measured inside the walls. price/m² is the installed cost per square metre for the structure type, covering materials and labour for the works that the rate includes. C_gate is the cost of the gate, and C_electrical is the cost of basic lighting and power sockets.
The formula is a plain sum. Area is multiplied by the rate, and the two extras are added on their own. This matters because a gate costs much the same whether the garage is small or large, and electrical works depend on the distance to the existing consumer unit rather than on floor area. Treating those lines as per-square-metre prices would overstate the cost of large garages and understate small ones.
Edge cases
If no gate is selected, C_gate is zero and the total covers only the structure and the electrical works. If electrical works are not included, C_electrical is zero. Both are valid inputs and produce valid estimates for a garage without a gate or without power.
If the area is zero, the area term disappears and only the extras remain. That result has no meaning as a garage estimate, so enter the actual floor area. Negative areas, rates or extra costs have no physical meaning. Re-enter the values rather than reading the result.
Very small garages deserve care. A rate that works for a standard single-car space may not apply to a narrow or very short structure, because the fixed parts of the works, such as the foundation, the roof and the door opening, do not shrink in proportion to area.
What the rate per m² usually covers
The rate is meant to cover the slab or foundation, the walls, the roof and a basic external finish. It usually does not cover the gate, the electrical works, drainage connections, internal finishes beyond the basic slab, plot preparation, or the professional fees for submissions to the BCA. When a quote does not list these, ask the contractor to state them separately before comparing totals.
Choosing a structure type
Prefabricated steel garages are the fastest to erect and the most economical for utility use. They suit a car, bicycles and storage, and they are a practical choice when the plot does not allow a long build. Their drawback is appearance. Compared with the house, they often look like a separate shed, and some owners find them difficult to match to a landed property with a finished facade.
Concrete block garages take longer because the walls, slab and roof are built on site in sequence. The result is durable and blends with the house. It is the common choice where the garage is meant to be a permanent part of the home.
Attached extensions share a wall or roof with the main house. They are the most expensive option per square metre because the structure must tie into the existing building, the finish must match the house, and the roof and waterproofing need careful detailing at the junction. An engineer should confirm the connection before any work starts.
Approvals and planning rules
Building works in Singapore generally need approval under the Building Control Act, which the BCA administers. Under this Act, plans are submitted by a Qualified Person (QP), an architect or professional engineer registered with the BCA, who certifies the design and supervises the works. Minor works may be exempt from plan submission under the Act and its regulations. The BCA publishes the current exemption criteria, so check them before you assume an exemption applies.
Planning rules for the plot also apply. The URA Master Plan, prepared under the Planning Act, sets the permitted use, plot ratio, building height and setbacks from boundaries for each plot. A garage that fits the physical space may still breach a setback, so check these limits before you finalise the design and the quotes.
The slab and walls are designed to the Eurocodes as adopted in Singapore, with the Singapore National Annexes (SS EN 1990 to SS EN 1999). Ask the engineer to confirm the design basis in writing.
Electrical works
Electrical work must be carried out by a licensed electrical worker, licensed by the Energy Market Authority under the Electricity Act. Installations are designed to SS 638, the Singapore code of practice for electrical installations. A typical garage is supplied from a single-phase 230 V supply. Miniature circuit breakers are commonly specified to the IEC 60898 series.
The cost of electrical works depends mainly on the distance from the garage to the existing consumer unit, how many points are needed and whether a dedicated circuit for an electric vehicle charger is included. An EV charger is usually a separate scope with its own cable size and protection, so do not assume that the basic lighting and sockets line covers it.
Gate options
A manual tilt gate is the simplest and least costly option. An automatic sectional gate costs more because of the motor, controls and safety sensors. Before choosing, confirm the gate width and height against the garage opening and check that the motor is rated for the weight of the gate. Ask whether the motor has a battery backup for power cuts, because without one an automatic gate may not open during an outage.
Common mistakes
The most common mistake is comparing totals that do not cover the same scope. One quote may include the slab and roof, while another leaves them out. The second common error is applying the calculator to the whole plot rather than to the garage. Measure the garage floor area only.
Other frequent gaps include drainage, surface water run-off, the connection to existing drains, site access for materials and the cost of removing soil or debris. Each of these can change the total, so raise them with each contractor.
When to use this calculator and when not to
Use the calculator to plan a budget, compare the structure types, and check whether the quotes you received cover all three lines. It is useful before you involve a contractor and again after you receive quotes, to spot missing items.
Do not use it as a fixed price or a tender figure. It cannot account for ground conditions, load-bearing requirements, slope, access, the design of your particular house or the conditions attached to an approval. For any attached extension, poor ground or a structure that carries load from an existing roof, the design must come from a qualified engineer.
Quotes and contractors
Ask for at least two or three written quotes with the same breakdown: structure, gate, electrical works, approvals and exclusions. Check that the contractor is registered with the BCA for the type of works, ask for references from recent jobs on landed properties, and agree on payment milestones before signing. A quote that is much lower than the others often excludes items that will appear later as variations.
This calculator gives a planning estimate. Real costs depend on the site, the chosen materials, the contractor and the approvals, and they vary between quotes.
Frequently asked questions
How much does it cost to build a garage in Singapore?
The cost depends mainly on the structure type, the usable floor area and the scope of extras. A prefabricated steel garage is usually the lowest-cost structure, a concrete block garage costs more, and an extension attached to the house costs most because it has to tie into the existing building. The gate and electrical works are priced separately because they do not scale with area. Enter the rate per square metre from your written quotes, along with the gate and electrical costs, to see a planning total in three scenarios. Treat the result as an estimate and confirm it with two or three detailed quotes before committing to a budget.
Do I need approval from BCA to build a garage?
In most cases, yes. Building works in Singapore generally need approval under the Building Control Act, which the Building and Construction Authority (BCA) administers. Plans are submitted by a Qualified Person registered with the BCA, who supervises the works. Minor works may be exempt, but the criteria are set out in the Act and its regulations and can change, so confirm them on the BCA website before you start. Check the URA Master Plan rules for your plot as well, since they set out setbacks, plot ratio and building height. A garage attached to the house is more likely to need full plan approval, so plan for that from the start.
What is the difference between a steel prefab garage and a concrete block one?
A prefabricated steel garage is delivered in sections, bolted onto a prepared slab and erected in a short time. It is usually the lower-cost option per square metre and suits utility use, though its appearance is more functional. A concrete block garage is built on site with masonry walls, a reinforced concrete slab and a roof. It takes longer and costs more, but it is durable, blends with a house and generally needs less upkeep. The calculator shows the difference between the two rates, so you can see how much the structure choice moves the total for the same area.
How big should a garage be for one or two cars?
Start with the vehicle dimensions. Measure the length and width of each car, then add clearance on each side for opening doors and walking around, plus extra length if you want a workbench or storage. The usable floor area must cover these dimensions, measured inside the walls. A two-car garage needs considerably more area than a single-car one because both cars and their door openings must fit. Check the space against your plot's setbacks and any planning limits on building size before finalising the design, since a layout that fits the cars may not fit the plot.
Is an automatic gate worth it for a new garage?
For daily use, an automatic gate offers convenience, security and shelter from rain when you drive in and out. It costs more than a manual tilt gate because of the motor, controls and safety sensors. Before buying, confirm the gate width and height against the opening and check that the motor suits the weight of the gate. Ask whether the system has a battery backup for power cuts, since an automatic gate may not open during an outage without one. Compare written quotes that list the motor, controls and safety features separately so the difference is clear.
When should I hire a contractor for a garage?
Use a contractor for any work that involves a slab, masonry walls, a roof, an attached extension or a new electrical installation. Electrical installation work must be carried out by a licensed electrical worker, licensed by the Energy Market Authority (EMA). Choose a builder registered with the BCA for the type of works, ask for references from recent projects on landed properties, get at least two or three written quotes and check that exclusions and payment milestones are stated in the contract. A simple prefabricated structure with no slab or electrical work may be within the reach of a competent DIY builder, but it still has to meet the approval rules.
Related calculators
Renovation Cost per m² Calculator for Singapore
Estimate the total cost of a renovation or new build in Singapore from floor area, type of works, finish level and location.
Automatic Gate Cost Calculator (Singapore)
Estimates the cost of a sliding, swing or sectional automatic gate, covering the frame, drive unit and installation.
View all Garden, Outdoor & Water calculators →
By RivoCalc · Reviewed under our editorial methodology · Updated 13 June 2026
This calculator gives a planning estimate only. Real costs depend on site conditions, structure design, materials, the contractor and approval requirements, and they vary between quotes. Confirm approval requirements with the Building and Construction Authority (BCA) and have a qualified engineer or Qualified Person assess the works before committing to a budget.
