Roof Tile Quantity Calculator
Calculates the number of roof tiles for a pitched roof, including a waste allowance, for flat interlocking, barrel, Roman and plain tile formats.
To cover 60 m² of pitched roof with flat interlocking tiles at 16 tiles per m² and a 10% waste allowance, you need 1,056 tiles. The same 60 m² in barrel tiles, at about 13 pieces per m², needs 858 pieces, roughly 19% fewer, though the exact figure depends on the product and the overlap used.
The tile type matters for more than appearance. Yield per square metre varies widely between formats, and it decides how many boxes or pallets you need to order. This calculator covers four common ceramic formats: flat interlocking, barrel, Roman and plain tile. Each has a default yield that fills in automatically, so you can check it against your product. For concrete tiles or a specific product, select the custom option and enter the yield from the manufacturer's data sheet.
Enter the sloping area of the roof, not the plan area, which is the footprint seen from above. The sloping surface is always larger, and the gap grows with the pitch. At 30% pitch the sloping area is about 4.4% larger than the plan area, and at 45% it is about 9.7% larger. Using the plan area is a common reason for ordering too few tiles.
The calculator works in metric units: square metres for area and tiles per square metre for yield. Enter the area, choose the tile type, check the waste allowance and, if you wish, enter a price per tile. The result gives the total number of tiles, rounded up to a whole tile, and an estimate of material cost.
Pitched roofs are uncommon on HDB flats and condominiums, which usually have flat roofs. The calculator is therefore most useful for landed houses, such as a landed house in Bishan, and for pitched roofs added to existing homes. Treat the result as an estimate for ordering and budgeting. It does not replace a roof design by a qualified professional.
The result updates automatically.
The actual sloped surface area, not the plan (footprint) area
Typical value for the selected roof tile type
10% for simple roofs; 15% for roofs with multiple pitches or complex ridge lines
Check the unit price with your supplier for the model you've chosen
Roof tiles needed
includes 128 pieces of waste allowance
- Roof area
- 80.0 m²
- Coverage rate
- 16 pieces
- Tiles before allowance
- 1,280 pieces
How it works
Formula
How the calculation works
How many roof tiles do I need?
Roofing is one of the largest jobs on a house, both for weather protection and for cost. Counting tiles accurately before you order avoids the common problem of running short halfway through a job, when tiles from the same batch are no longer available. The formula is simple: multiply the roof area by the tile yield per square metre, then add a waste allowance. The mistake most people make is using the plan area of the roof instead of the real sloping area.
The calculator uses this formula:
N = ⌈A × r × (1 + D/100)⌉
N is the total number of tiles, rounded up to the next whole tile. A is the real roof area in m², measured over the sloping surface. r is the tile yield in tiles per m², taken from the manufacturer's data sheet. D is the waste allowance as a percentage. The term (1 + D/100) adds the allowance to the whole count, so the waste is applied to the full roof, not only to the cut tiles at the edges.
For a 60 m² sloping roof, 16 tiles per m² and a 10% allowance, the calculation is 60 × 16 × 1.10 = 1,056 tiles.
Tile types and their yields
Four formats are covered, and each has a default yield in the calculator. The yield depends on the product, so treat the default as a starting point and check it against the manufacturer's data sheet. The formats differ mainly in piece size, which sets how many pieces you need per square metre:
- Flat interlocking tile: a rectangular tile with a mechanical interlock, which keeps courses aligned and makes it quick to lay.
- Barrel tile (a two-piece pan and cover tile): a traditional format in which a channel tile and a cover tile are laid as a pair. It takes longer to lay, and it suits restoration work and projects that need a traditional look.
- Roman tile: similar in size to the flat interlocking format but with a softer profile.
- Plain tile: a small rectangular tile with a plain, austere look. Because each piece is small, many more pieces are needed per square metre.
The minimum pitch also depends on the product, so check the data sheet before choosing a format for a low-pitched roof. For concrete tiles or a specific product, select the custom option and enter the yield from the data sheet.
Measuring the real roof area
The area that matters is the sloping surface, not the plan area. A rectangular pitch 10 m long, with a horizontal run of 5 m and a pitch of 35%, has a sloping width of √(5² + 1.75²) ≈ 5.30 m. Its real area is 53 m², not the 50 m² shown on the plan.
If you know the plan area and the pitch but not the sloping area, use this conversion:
Sloping area = plan area × √(1 + (pitch in % / 100)²)
At 30% pitch the factor is 1.044, so the sloping area is about 4.4% larger than the plan area. At 45% the factor is 1.097, about 9.7% larger. On an 80 m² plan area, that gap is about 3.5 m² at 30% pitch and about 7.8 m² at 45%, which is enough to leave a short run of tiles at the last course. For a roof with two equal pitches, 80 m² in plan at 35% gives 80 × 1.059 ≈ 85 m² of roof.
For a replacement roof, a roofer can measure the area on site. For a new build, take the sloping area of each roof plane from the architect's drawings or the quantity surveyor's bill of quantities.
Waste allowance and rounding
Use 10% for simple, rectangular roofs with no interruptions. Use 15% for roofs with several planes, hips or valleys, where two roof planes meet. For complex or irregular roofs, allow more.
The allowance covers three sources of loss: cuts along the edges, especially at gable ends; breakage during transport and laying; and spare tiles for future repairs. Keep a small stock of spare tiles from the same batch, stored dry and under cover. Tiles from different batches can differ slightly in size or colour, and that difference often shows after a few years of sun and rain. A few spare tiles from the same batch are worth far more than a search for the same product years later.
The formula covers the main roof field only. Ridge, hip, valley and verge tiles are usually counted separately, so add them to your quantity list.
Local context in Singapore
Pitched roofs are uncommon on HDB flats and condominiums, which usually have flat concrete roofs. This calculator is therefore most relevant for landed houses, such as a landed house in Bishan with a pitched roof, and for pitched structures added to existing homes.
Building works on a private home are regulated under the Building Control Act, administered by the Building and Construction Authority (BCA). Check with your architect or engineer whether your roof work needs approval before work starts. For the tile product itself, EN 1304 is the European reference standard for clay roofing tiles and fittings. Local requirements may differ, so confirm what applies to your project.
When to use this calculator and when not to
The result suits early budgeting and checking a contractor's quote. It does not replace a roof design. For a full replacement or a new roof, engage a qualified professional with roofing experience. They will check the structure (battens, wall plates and roof trusses), the underlay or membrane, the eaves, and the correct laps and fixings for the chosen product. On older buildings, an inspection of the structure before any roof work is sensible, because problems in the timber are far easier to fix before new tiles go on.
Do not rely on this calculator for roofs with unusual geometry, such as curved or domed roofs. If you use a product with a very different size or interlock, check its data sheet before accepting the default yield.
Common mistakes
- Using the plan area. This undercounts tiles on any pitched roof, and the error grows with the pitch.
- Using a generic yield. Yields differ between products, so the data sheet figure should replace the default.
- Setting the waste allowance to zero. Breakage and cutting losses happen on every roof.
- Forgetting specialist tiles. Ridge, hip and valley tiles are not part of the field count.
- Mixing batches. Tiles from different production runs can differ in colour, so buy the full quantity at once.
Estimating material cost
If you enter a price per tile, the calculator multiplies it by the total number of tiles to estimate the material cost. The estimate does not include labour, underlay, battens, fixings or delivery, so treat it as a partial figure and add those items from supplier quotes.
Frequently asked questions
How many roof tiles do I need for 100 m² of roof?
Using example yields of 16 tiles per m² for flat interlocking tiles, 13 pieces per m² for barrel tiles and 48 per m² for plain tiles, with a 10% waste allowance: 100 × 16 × 1.10 = 1,760 tiles for flat interlocking; 100 × 13 × 1.10 = 1,430 pieces for barrel; 100 × 48 × 1.10 = 5,280 tiles for plain. These figures assume 100 m² of sloping roof surface, not plan area. For a precise value, use the calculator with the real sloping area of your roof and the yield from your product data sheet.
How many barrel tiles per m²?
Barrel tiles are counted as pieces, with pan and cover together. The yield depends on the product and the overlap used, so check the figure in the manufacturer's data sheet. As a worked example, 13 pieces per m² on a 50 m² roof plane gives 650 pieces, plus 10% waste (65 pieces), for a total of 715 pieces. Barrel tiles are a traditional two-piece format, so check the minimum pitch for your product before you choose them.
What is the difference between flat interlocking and barrel tiles?
Flat interlocking tiles are single pieces with a mechanical interlock, so they are quicker to lay and keep courses aligned. Barrel tiles are two-piece, with a pan and a cover, and take longer to lay. They have a more traditional appearance and are usually chosen for restoration work or where a traditional look is required. The installed cost per m² can be similar for both, because the number of pieces and the labour differ.
Should I use the plan area or the sloping area of the roof?
Always the sloping area, which is the real surface of the roof. The plan area is always smaller. To convert, use: sloping area = plan area × √(1 + (pitch in % / 100)²). At 30% pitch the factor is 1.044, and at 45% it is 1.097. Using the plan area leads to ordering fewer tiles than you need, with the risk of running short at the end of the job.
What is the minimum pitch for each tile type?
The minimum pitch depends on the tile format and the product, so check the manufacturer's data sheet, which may reference the EN 1304 product standard for clay roofing tiles. Below the minimum pitch, water can be driven under the tiles at the laps and enter the roof structure. Local requirements may be stricter, so confirm them with your professional.
When should I hire a roofing professional?
For any full roof replacement or new build, engage a qualified professional. The tile calculation is a budgeting step and does not replace a roof design. A professional checks the structure, the underlay or membrane, the minimum pitch, and the details at the ridge, hips, valleys and eaves. Older buildings should have their structure inspected before any roof work, since timber problems are much cheaper to fix before new tiles go on. Building works are regulated under the Building Control Act, administered by the Building and Construction Authority (BCA), so ask your professional whether your work needs approval.
Related calculators
By RivoCalc · Reviewed under our editorial methodology · Updated 3 June 2026
This calculator gives an estimate for ordering and budgeting only. Real quantities depend on the product, roof geometry, cutting and site conditions. It does not replace a structural or roofing assessment by a qualified professional.
