Skip to main content

Car Lease vs Auto Loan Calculator

Compares the monthly payment and total cost of a car lease and an auto loan, with and without buying the car at the end of the lease.

On the same car, a lease payment can be about 30% lower than an auto loan payment. In this example, the vehicle is financed at a 6% nominal annual rate over 60 months, and the lease residual value is 40% of the financed amount: the lease payment then comes to about 70% of the loan payment. The gap exists because a lease does not repay the residual value during the term, while a loan repays the full financed amount.

Both options start from the same point. The vehicle price minus the down payment gives the financed amount, and the same down payment applies to both contracts. From there the two structures diverge. With a lease, you use the car but the lessor owns it, and the residual value is set in advance as the price to buy the car at the end of the term. With an auto loan, you own the vehicle from the purchase date and repay the whole financed amount through level monthly payments.

Comparing only the monthly payment can mislead. A lower lease payment is partly a deferred cost: if you buy the car at the end, the residual value is added to the payments, and the total can exceed the total cost of the loan. If you return the car instead, the lease may cost less overall, but you finish the contract with no vehicle.

This calculator shows both monthly payments and the estimated total cost, with and without buying the car at the end of the lease. The result depends on the vehicle price, the down payment, the term in years, the residual value, and the nominal annual rate of each contract. Taxes, registration, insurance, mileage charges and end-of-lease fees are not included, so use the figures as a basis for comparing two offers on equal terms, then check each contract's disclosures before you sign.

The explanation below uses US units; the calculator works in either system.

The result updates automatically.

Total purchase price of the vehicle

Amount paid upfront without financing (same for both options)

Length of the lease or loan contract in years (max. 8)

Annual interest rate stated in the lease proposal

Amount due at the end to buy the vehicle; zero if there's no purchase option

Annual interest rate stated in the auto loan proposal

Monthly payment difference

$98.96

The lease has the lower monthly payment

Monthly payment (lease)
$388.36
Monthly payment (loan)
$487.32
Lease cost without final purchase
$23,641
Lease cost with final purchase (+residual value)
$28,641
Total auto loan cost
$28,391
Amount financed
$20,000

Total cost = down payment + payments + residual value (if the purchase option is exercised)

Share

How it works

1

Enter the total vehicle price and the down payment. Both options use the same figures.

2

Set the contract term in years.

3

Enter the lease residual value, the amount agreed for buying the car at the end of the contract.

Formula

P_L = (C − RV × (1+r)^−n) × r / (1 − (1+r)^−n) | P_C = C × r × (1+r)^n / ((1+r)^n − 1) | C = price − down_payment | r = NAR / 1200 | n = term × 12
P_L — Monthly lease payment
P_C — Monthly auto loan payment
C — Financed amount (vehicle price minus down payment)
RV — Residual value of the lease (the amount agreed for buying the car at the end of the contract)
r — Monthly interest rate as a decimal (nominal annual rate in percent divided by 1200)
n — Number of monthly payments (term in years × 12)
NAR — Nominal annual rate of the lease or auto loan contract, in percent, before fees

How the calculation works

Car Lease vs Auto Loan: How to Compare the Two Options

Financing a vehicle in the United States usually takes one of two routes: a car lease or an auto loan. Both spread the cost over a series of monthly payments, so you can drive a car without paying its full price up front. The mechanics behind them are different, however. Who owns the vehicle, what happens at the end of the contract and how the total cost is built all change the answer, which is why a comparison based only on the monthly payment can mislead.

Car lease: the lessor owns the vehicle

In a lease, the lessor (typically a bank, a finance company tied to a car manufacturer or another lender) buys the vehicle and lets you use it for the contract term in exchange for monthly payments. You do not own the car during the lease. At the end of the term you can usually return it, buy it for the residual value set in the contract, or sign a new lease.

The residual value is the central variable. The monthly payment covers the depreciation the lessor expects during the term and the interest on the money tied up in the vehicle, but it does not repay the residual value. Because a smaller share of the vehicle's value has to be repaid during the term, the payment is usually lower than the payment on a loan for the same financed amount, term and rate. The calculator works this out by discounting the residual value back to the start of the contract at the contract rate, subtracting that present value from the financed amount, and then applying the standard level-payment formula to the remainder.

Federal lease disclosure rules, set out in Regulation M, require key lease terms, including the residual value, to be disclosed in writing before you sign (Regulation M, content of disclosures). Reading those disclosures carefully is the best way to confirm the figures used in this calculator.

Auto loan: ownership from day one, full repayment

With an auto loan, you own the vehicle from the purchase date, and the lender holds a lien on it until the loan is repaid. The financed amount, which is the vehicle price minus the down payment, is repaid in full over the term with a level monthly payment. This is the standard level-payment method: each payment covers the interest on the outstanding balance and reduces the principal. Early payments carry more interest, and as the balance falls, a larger part of each payment goes to principal.

Because the loan repays every part of the financed amount, nothing is left to pay at the end of the contract. For the same vehicle, term and rate, the monthly payment is therefore higher than the lease payment, but there is no final amount to settle to become the owner.

Total cost, ownership and taxes: the practical differences

The monthly payment is not the total cost. For a lease, the total cost is the down payment, plus all monthly payments, plus the residual value if you decide to buy the car at the end. Compared directly with an auto loan, where the total cost is the down payment plus all loan payments, the two can be close. In many contracts the lease is cheaper only if you do not buy the car at the end. When the residual value is high compared with the price, the auto loan can be the cheaper route to ownership.

If you return the car at the end of a lease, the total cost includes the down payment, the monthly payments and any end-of-lease charges written into the contract. You then have no vehicle to keep. Many drivers who prefer a newer model every few years find that trade-off worthwhile, while drivers who plan to keep a car for many years usually end up with a lower total cost by buying it with a loan.

Tax treatment is a separate question. The Internal Revenue Service sets different rules for business and personal use of a vehicle, set out in IRS Publication 463, and the deductible share of a lease payment or a loan interest payment depends on how the vehicle is used and how the cost is recovered. These rules are detailed and change over time, so this calculator does not model them. Self-employed people and business owners should not assume that a lease is automatically the better tax choice, and should check the treatment with a tax professional before deciding.

Common mistakes when comparing a lease and an auto loan

The most frequent error is comparing only the monthly payments. A lower lease payment is partly a deferred cost. If you want to keep the car at the end, the residual value is an additional payment that changes the total substantially, so the comparison must include it.

The second mistake is comparing interest rates that are not equivalent. The nominal annual rate entered in this calculator is the rate used to compute the payments. The annual percentage rate (APR) is the standardized figure that federal Truth in Lending rules require lenders to disclose (Regulation Z, content of disclosures), and it includes certain fees, such as origination fees, on top of interest. Two loan offers with the same nominal rate can therefore have different APRs. For leases, there is no single rate that works the same way, so compare the total cost of each contract as shown in the disclosures.

The third mistake is leaving out the costs that sit outside the monthly payment. Many lease contracts specify the insurance coverage the lessor requires, often including comprehensive and collision coverage with set deductibles and, in some cases, gap coverage. Lease contracts also commonly limit annual mileage and charge for excess mileage and for wear beyond normal use at the end of the term. Auto loans usually require insurance too, but lease terms tend to be stricter. None of these charges appear in the calculator's result.

How the calculator works and its edge cases

The calculator computes two monthly payments from the same inputs. The lease payment starts from the financed amount, subtracts the present value of the residual value and applies the level-payment formula. The loan payment applies the level-payment formula to the full financed amount. Both use the same monthly rate, which is the nominal annual rate divided by 1200, and the same number of monthly payments, which is the term in years multiplied by 12. The formula is written in metric units internally, and the calculator converts automatically, so imperial values can be entered directly.

The edge cases follow from the mathematics. At a zero interest rate, both payments reduce to the amount to be repaid divided by the number of payments, with the residual value subtracted first for the lease. A zero term has no valid result, because the formula divides by zero, so at least one monthly payment is needed. A one-month term gives a single lease payment equal to the financed amount with one month of interest, minus the residual value. A zero financed amount gives zero payments, and a negative financed amount, which happens when the down payment exceeds the price, has no meaning for this comparison, so the inputs should be checked.

The calculator also assumes a fixed rate for the whole term. Some auto financing is structured with variable rates tied to a published benchmark index, and in that case the actual payments can change over the contract. The result should be read as an estimate at the rates entered.

When to use this calculator and when not to

The calculator is useful when you hold two concrete offers for the same vehicle, with the same price, down payment and term, and want to see the monthly payment and the estimated total cost side by side. It is also useful for checking how the residual value changes the lease payment and the cost of buying the car at the end.

It is less useful as a final decision tool. It does not model taxes, sales tax, registration, insurance, mileage charges, end-of-lease fees or manufacturer incentives that change the rate offered. If one offer includes a subsidized rate, enter the rate that applies in the contract and check whether the incentive depends on conditions that change the total cost. For a vehicle used in a business, the tax treatment can outweigh the difference in payments, so it should be reviewed separately.

When to consult a professional

This calculator gives a quantitative comparison of the two options based on the parameters you enter. For a complete analysis, including tax treatment, a comparison of specific offers from different lenders and the effect on the household budget over several years, a licensed loan officer, a tax professional or a fee-only financial planner can review the actual contract figures. The Consumer Financial Protection Bureau explains lease and loan disclosures in plain language on its website.

Frequently asked questions

How is a car lease payment calculated?

The lease payment is calculated from the financed amount (the vehicle price minus the down payment), the residual value agreed in the contract, the monthly interest rate and the number of monthly payments. The formula takes the present value of the residual value, discounted at the contract rate, and subtracts it from the financed amount before applying the standard level-payment formula. Because part of the vehicle's value is not repaid during the term, the result is usually lower than the payment on an auto loan for the same vehicle, term and rate.

Is leasing always cheaper than an auto loan?

No. The monthly lease payment is usually lower than the auto loan payment for the same vehicle and term, because the residual value is not repaid during the contract. However, the total cost can be higher if you buy the car at the end of the lease, since you pay the residual value on top of the monthly payments. Whether the lease or the loan costs less overall depends on the residual value, the rates offered, the fees and whether you keep the vehicle.

What is the residual value on a car lease?

The residual value is the price of the vehicle at the end of the lease, as set in the contract. It is the amount you can pay to buy the car at the end of the term. If you do not exercise that option, the car is returned to the lessor. A higher residual value lowers the monthly lease payment, because less of the vehicle's value has to be repaid during the term, but it raises the cost of buying the car at the end.

When is leasing a better option for individuals?

Leasing can suit people who want a lower monthly payment without intending to keep the car, or who prefer to replace the vehicle with a newer model every few years. It is less suitable for drivers who plan to keep the car for a long time, since the cost of buying at the end of the lease is then added to the payments. Drivers who expect high annual mileage should also check the mileage limits and the charges for exceeding them, which the calculator does not include.

What is the difference between the interest rate and the APR?

The interest rate is the rate used to calculate the monthly payment; it is the figure entered in this calculator. The annual percentage rate (APR) is the standardized figure lenders must disclose under federal Truth in Lending rules ([Regulation Z](https://www.consumerfinance.gov/rules-policy/regulations/1026/18/)), and it includes certain fees and charges, such as origination fees, on top of interest. Comparing loan offers on APR, rather than the interest rate alone, shows the cost of borrowing more fully. Lease offers are disclosed differently, so compare the total cost of each lease contract.

When should I consult a professional before choosing between a lease and a loan?

A professional review is worthwhile when the vehicle will be used for business, because the tax treatment of leases and loans depends on how the vehicle is used and how the cost is recovered. It is also useful when you want to compare specific offers from several lenders on equivalent terms, or when the decision has a large effect on your household budget over several years. A licensed loan officer, a tax professional or a fee-only financial planner can review the actual contract figures.

Related calculators

By RivoCalc · Reviewed under our editorial methodology · Updated July 16, 2026

This calculator provides an estimate for informational purposes only and is not financial or tax advice. Actual payments and costs depend on each lender's contract terms, fees, insurance requirements and your personal financial situation. For financing decisions, consult a qualified professional or your lender.